Re: 2.6.13-rc4-mm1

From: Michael Thonke (iogl64nx_at_gmail.com)
Date: 07/31/05

  • Next message: Pavel Machek: "Re: revert yenta free_irq on suspend"
    Date:	Sun, 31 Jul 2005 15:11:44 +0000
    To: Andrew Morton <akpm@osdl.org>
    
    

    Hello Andrew,

    the ACPI bug or the problems with 2.6.13-rc3-mm[2,3] gone.
    The system boots now noiseless, except on problem with USB.

    If my Prolific USB-Serialadapter plugged in on reboot
    the ehci_hcd driver complains about a Hand-off bug in Bios.

    -> snip

    ehci_hcd 0000:00:1d.7: EHCI Host Controller

    ehci_hcd 0000:00:1d.7: debug port 1

    ehci_hcd 0000:00:1d.7: BIOS handoff failed (104, 01010001)

    ehci_hcd 0000:00:1d.7: continuing after BIOS bug...

    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1

    ehci_hcd 0000:00:1d.7: irq 161, io mem 0xd2dffc00

    -> snip

    I wonder about this because all other USB devices working without this
    message on boot.

    USB Mouse,Keyboard and USB Storage and all mixed from USB 1.1 and 2.

    When I rebooted without plugged Prolific Adapter and plug them in the
    same port
    the kernel prints this message.

    ->snip

    usb 4-1: new full speed USB device using uhci_hcd and address 2

    pl2303 4-1:1.0: PL-2303 converter detected

    usb 4-1: PL-2303 converter now attached to ttyUSB0

    -> snip

    Any Ideas what could be wrong here?

    Greets

    Best regards
              Michael
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/


  • Next message: Pavel Machek: "Re: revert yenta free_irq on suspend"

    Relevant Pages

    • RE: 2.6.13-rc4-mm1
      ... >To: Andrew Morton ... >The system boots now noiseless, except on problem with USB. ... >If my Prolific USB-Serialadapter plugged in on reboot ...
      (Linux-Kernel)
    • psm (pr kern/59067) and irq 16 rate, some observations
      ... It's clear that I am seeing the same out of control irq16 that some ... With no usb devices, the usb kernel ... After rebooting I tried the trackball on usb again, ... along with my keyboard, so I had to ssh in, rebuild the kernel, and reboot. ...
      (freebsd-current)
    • Re: Safely Remove External Drive
      ... that now my external USB causes the whole system to reboot when I turn it ... I don't think one can ever have too many resources. ... for USB and other drive removal. ...
      (microsoft.public.windowsxp.hardware)
    • Re: modularized kernels
      ... I don't usually compile modules I don't plan to use. ... Linux, being a monolithic kernel, if any "subsystem" is in a serious state ... the only action I would trust is a reboot. ... I have encountered a USB controller problem a couple times on my Linux ...
      (comp.os.linux.development.system)
    • Re: WM6 Activesync with Exchange Server "Waiting for Network" problem
      ... Cisco ASA5505 Firewall configured to allow SSL to Exchange Server ... If I reboot my phone with the USB cable connected, I can use USB but not ... If I reboot my phone and use OTA sync, I cannot use USB until I reboot ...
      (microsoft.public.pocketpc.activesync)