Re: 2 errors in 2.6.12

From: CIJOML (cijoml_at_nebuchadnezzar.smejdil.cz)
Date: 08/01/05

  • Next message: Dave Jones: "Re: cpufreq on Toshiba Portege 4000?" 
    Date:	Mon, 1 Aug 2005 20:03:57 +0200 (CEST)
To: mkrufky@m1k.net, Linux and Kernel Video <video4linux-list@redhat.com>

    On Sun, 31 Jul 2005, Michael Krufky wrote:

    > Andrew Morton wrote:
    >
    > >Michal Semler <cijoml@volny.cz> wrote:
    > >
    > >
    > >> This is what I gets into dmesg:
    > >>
    > >> Linux video capture interface: v1.00
    > >> bttv: driver version 0.9.15 loaded
    > >> bttv: using 8 buffers with 2080k (520 pages) each for capture
    > >> bttv: Bt8xx card found (0).
    > >> ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKH] -> GSI 9 (level, low) ->
    > >> IRQ 9
    > >> bttv0: Bt878 (rev 17) at 0000:01:0b.0, irq: 9, latency: 32, mmio: 0xb69fe000
    > >> bttv0: using: ProVideo PV951 [card=42,insmod option]
    > >> bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
    > >> bttv0: using tuner=1
    > >> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
    > >> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
    > >> tvaudio: TV audio decoder + audio/video mux driver
    > >> tvaudio: known chips:
    > >> tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54
    > >> (PV951),ta8874z
    > >> tvaudio: found pic16c54 (PV951) @ 0x96
    > >> bttv0: i2c: checking for TDA9887 @ 0x86... not found
    > >> tuner: Unknown parameter `type'
    > >> bttv0: registered device video0
    > >> bttv0: registered device vbi0
    > >> bttv0: registered device radio0
    > >> bttv0: PLL: 28636363 => 35468950 .. ok
    > >> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
    > >> PCI: setting IRQ 10 as level-triggered
    > >> ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [LNKB] -> GSI 10 (level, low) ->
    > >> IRQ 10
    > >>
    > >>
    > >
    > >(cc the v4l list)
    > >
    > >The above is with 2.6.13-rc4. 2.6.11 was OK.
    > >
    > >
    > Michael-
    >
    > Please remove the insmod options:
    >
    > bttv0: using: ProVideo PV951 [card=42,insmod option]
    >
    > ...and show us dmesg output with autodetection.
    >
    > Also, please try CVS and tell us if you still have the problem... Instructions at:
    >
    > http://linuxtv.org/v4lwiki/index.php/How_to_build_from_CVS
    >

    Linux video capture interface: v1.00
    bttv: driver version 0.9.15 loaded
    bttv: using 8 buffers with 2080k (520 pages) each for capture
    bttv: Bt8xx card found (0).
    ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKH] -> GSI 9 (level, low)
    -> IRQ 9
    bttv0: Bt878 (rev 17) at 0000:01:0b.0, irq: 9, latency: 32, mmio:
    0xb69fe000
    bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
    bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
    tveeprom(bttv internal): Huh, no eeprom present (err=-121)?
    bttv0: using tuner=-1
    bttv0: i2c: checking for MSP34xx @ 0x80... not found
    bttv0: i2c: checking for TDA9875 @ 0xb0... not found
    bttv0: i2c: checking for TDA7432 @ 0x8a... not found
    bttv0: i2c: checking for TDA9887 @ 0x86... not found
    bttv0: registered device video0
    bttv0: registered device vbi0

    Same with CVS - kernel 2.6.11 with my options works for me like hell.
    Card is really PV951 - it was written on box also :)

    Michal

    > --
    > Michael Krufky
    >
    > --
    > video4linux-list mailing list
    > Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
    > https://www.redhat.com/mailman/listinfo/video4linux-list
    >
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  • Next message: Dave Jones: "Re: cpufreq on Toshiba Portege 4000?"