RE: [PATCH 2.4.31 1/1] scsi/megaraid2: add 64-bit application sup port
From: Ju, Seokmann (sju_at_lsil.com)
Date: 08/02/05
- Previous message: George Anzinger: "[PATCH] Re: [PATCH] NMI watch dog notify patch"
- Next in thread: Andrey Melnikoff: "Re: [PATCH 2.4.31 1/1] scsi/megaraid2: add 64-bit application sup?port"
- Reply: Andrey Melnikoff: "Re: [PATCH 2.4.31 1/1] scsi/megaraid2: add 64-bit application sup?port"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
To: "'Marcelo Tosatti'" <marcelo.tosatti@cyclades.com> Date: Tue, 2 Aug 2005 16:29:04 -0400
Hi Marcelo,
I've made changes that reflect your comments.
On Tuesday, July 26, 2005 4:33 AM, Marcelo Tosatti wrote:
> vary_io has never been part of mainline. How come did you add it
> here?
Has removed '.vary_io'.
> There is no CONFIG_COMPAT on v2.4... thanks James and Christoph
> for reviewing.
Has removed 'CONFIG_COMPAT'.
Thank you.
Signed-off-by: Seokmann Ju <seokmann.ju@lsil.com>
---
diff -Naur old/drivers/scsi/megaraid2.c new/drivers/scsi/megaraid2.c
--- old/drivers/scsi/megaraid2.c 2005-07-15 07:52:27.000000000 -0400
+++ new/drivers/scsi/megaraid2.c 2005-07-15 07:52:18.000000000 -0400
@@ -14,7 +14,7 @@
* - speed-ups (list handling fixes, issued_list, optimizations.)
* - lots of cleanups.
*
- * Version : v2.10.8.2 (July 26, 2004)
+ * Version : v2.10.10.1 (January 27, 2005)
*
* Authors: Atul Mukker <Atul.Mukker@lsil.com>
* Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
@@ -46,7 +46,7 @@
#include "megaraid2.h"
-#if defined(__x86_64__)
+#ifdef LSI_CONFIG_COMPAT
#include <asm/ioctl32.h>
#endif
@@ -233,7 +233,7 @@
"MegaRAID Shutdown routine not
registered!!\n");
}
-#if defined(__x86_64__)
+#ifdef LSI_CONFIG_COMPAT
/*
* Register the 32-bit ioctl conversion
*/
@@ -341,6 +341,7 @@
(subsysvid != INTEL_SUBSYS_VID) &&
(subsysvid != FSC_SUBSYS_VID) &&
(subsysvid != ACER_SUBSYS_VID) &&
+ (subsysvid != NEC_SUBSYS_VID) &&
(subsysvid != LSI_SUBSYS_VID) ) continue;
@@ -989,268 +990,6 @@
}
-/**
- * issue_scb()
- * @adapter - pointer to our soft state
- * @scb - scsi control block
- *
- * Post a command to the card if the mailbox is available, otherwise return
- * busy. We also take the scb from the pending list if the mailbox is
- * available.
- */
-static inline int
-issue_scb(adapter_t *adapter, scb_t *scb)
-{
- volatile mbox64_t *mbox64 = adapter->mbox64;
- volatile mbox_t *mbox = adapter->mbox;
- unsigned int i = 0;
-
- if(unlikely(mbox->busy)) {
- do {
- udelay(1);
- i++;
- } while( mbox->busy && (i < max_mbox_busy_wait) );
-
- if(mbox->busy) return -1;
- }
-
- /* Copy mailbox data into host structure */
- memcpy((char *)mbox, (char *)scb->raw_mbox, 16);
-
- mbox->cmdid = scb->idx; /* Set cmdid */
- mbox->busy = 1; /* Set busy */
-
-
- /*
- * Increment the pending queue counter
- */
- atomic_inc(&adapter->pend_cmds);
-
- switch (mbox->cmd) {
- case MEGA_MBOXCMD_EXTPTHRU:
- if( !adapter->has_64bit_addr ) break;
- // else fall through
- case MEGA_MBOXCMD_LREAD64:
- case MEGA_MBOXCMD_LWRITE64:
- case MEGA_MBOXCMD_PASSTHRU64:
- mbox64->xfer_segment_lo = mbox->xferaddr;
- mbox64->xfer_segment_hi = 0;
- mbox->xferaddr = 0xFFFFFFFF;
- break;
- default:
- mbox64->xfer_segment_lo = 0;
- mbox64->xfer_segment_hi = 0;
- }
-
- /*
- * post the command
- */
- scb->state |= SCB_ISSUED;
-
- if( likely(adapter->flag & BOARD_MEMMAP) ) {
- mbox->poll = 0;
- mbox->ack = 0;
- WRINDOOR(adapter, adapter->mbox_dma | 0x1);
- }
- else {
- irq_enable(adapter);
- issue_command(adapter);
- }
-
- return 0;
-}
-
-
-/**
- * mega_runpendq()
- * @adapter - pointer to our soft state
- *
- * Runs through the list of pending requests.
- */
-static inline void
-mega_runpendq(adapter_t *adapter)
-{
- if(!list_empty(&adapter->pending_list))
- __mega_runpendq(adapter);
-}
-
-
-static void
-__mega_runpendq(adapter_t *adapter)
-{
- scb_t *scb;
- struct list_head *pos, *next;
-
- /* Issue any pending commands to the card */
- list_for_each_safe(pos, next, &adapter->pending_list) {
-
- scb = list_entry(pos, scb_t, list);
-
- if( !(scb->state & SCB_ISSUED) ) {
-
- if( issue_scb(adapter, scb) != 0 )
- return;
- }
- }
-
- return;
-}
-
-
-/**
- * mega_allocate_scb()
- * @adapter - pointer to our soft state
- * @cmd - scsi command from the mid-layer
- *
- * Allocate a SCB structure. This is the central structure for controller
- * commands.
- */
-static inline scb_t *
-mega_allocate_scb(adapter_t *adapter, Scsi_Cmnd *cmd)
-{
- struct list_head *head = &adapter->free_list;
- scb_t *scb;
-
- /* Unlink command from Free List */
- if( !list_empty(head) ) {
-
- scb = list_entry(head->next, scb_t, list);
-
- list_del_init(head->next);
-
- scb->state = SCB_ACTIVE;
- scb->cmd = cmd;
- scb->dma_type = MEGA_DMA_TYPE_NONE;
-
- return scb;
- }
-
- return NULL;
-}
-
-
-/**
- * mega_get_ldrv_num()
- * @adapter - pointer to our soft state
- * @cmd - scsi mid layer command
- * @channel - channel on the controller
- *
- * Calculate the logical drive number based on the information in scsi
command
- * and the channel number.
- */
-static inline int
-mega_get_ldrv_num(adapter_t *adapter, Scsi_Cmnd *cmd, int channel)
-{
- int tgt;
- int ldrv_num;
-
- tgt = cmd->target;
-
- if ( tgt > adapter->this_id )
- tgt--; /* we do not get inquires for initiator id */
-
- ldrv_num = (channel * 15) + tgt;
-
-
- /*
- * If we have a logical drive with boot enabled, project it first
- */
- if( adapter->boot_ldrv_enabled ) {
- if( ldrv_num == 0 ) {
- ldrv_num = adapter->boot_ldrv;
- }
- else {
- if( ldrv_num <= adapter->boot_ldrv ) {
- ldrv_num--;
- }
- }
- }
-
- /*
- * If "delete logical drive" feature is enabled on this controller,
- * the value returned should be 0x80+logical drive id.
- */
- if (adapter->support_random_del)
- ldrv_num += 0x80;
-
- return ldrv_num;
-}
-
-/*
- * Wait until the controller's mailbox is available
- */
-static inline int
-mega_busywait_mbox (adapter_t *adapter)
-{
- if (adapter->mbox->busy)
- return __mega_busywait_mbox(adapter);
- return 0;
-}
-
-
-/**
- * megaraid_iombox_ack_sequence - interrupt ack sequence for IO mapped HBAs
- * @adapter - controller's soft state
- *
- * Interrupt ackrowledgement sequence for IO mapped HBAs
- */
-static inline void
-megaraid_iombox_ack_sequence(adapter_t *adapter)
-{
- u8 status;
- u8 nstatus;
- u8 completed[MAX_FIRMWARE_STATUS];
- u8 byte;
- int i;
-
-
- /*
- * loop till F/W has more commands for us to complete.
- */
- do {
- /* Check if a valid interrupt is pending */
- byte = irq_state(adapter);
- if( (byte & VALID_INTR_BYTE) == 0 ) {
- return;
- }
- set_irq_state(adapter, byte);
-
- while ((nstatus = adapter->mbox->numstatus) == 0xFF) {
- cpu_relax();
- }
- adapter->mbox->numstatus = 0xFF;
-
- for (i = 0; i < nstatus; i++) {
- while ((completed[i] = adapter->mbox->completed[i])
- == 0xFF) {
- cpu_relax();
- }
-
- adapter->mbox->completed[i] = 0xFF;
- }
-
- // we must read the valid status now
- if ((status = adapter->mbox->status) == 0xFF) {
- printk(KERN_WARNING
- "megaraid critical: status 0xFF from firmware.\n");
- }
- adapter->mbox->status = 0xFF;
-
- /*
- * decrement the pending queue counter
- */
- atomic_sub(nstatus, &adapter->pend_cmds);
-
- /* Acknowledge interrupt */
- irq_ack(adapter);
-
- mega_cmd_done(adapter, completed, nstatus, status);
-
- } while(1);
-}
-
-
-
/*
* megaraid_queue()
* @scmd - Issue this scsi command
@@ -1755,8 +1494,8 @@
pthru = scb->pthru;
memset(pthru, 0, sizeof (mega_passthru));
- /* 0=6sec/1=60sec/2=10min/3=3hrs */
- pthru->timeout = 2;
+ /* 0=6sec/1=60sec/2=10min/3=3hrs/4=NO timeout */
+ pthru->timeout = 4;
pthru->ars = 1;
pthru->reqsenselen = 14;
@@ -1819,8 +1558,8 @@
epthru = scb->epthru;
memset(epthru, 0, sizeof(mega_ext_passthru));
- /* 0=6sec/1=60sec/2=10min/3=3hrs */
- epthru->timeout = 2;
+ /* 0=6sec/1=60sec/2=10min/3=3hrs/4=NO timeout */
+ epthru->timeout = 4;
epthru->ars = 1;
epthru->reqsenselen = 14;
@@ -1863,6 +1602,145 @@
/**
+ * mega_allocate_scb()
+ * @adapter - pointer to our soft state
+ * @cmd - scsi command from the mid-layer
+ *
+ * Allocate a SCB structure. This is the central structure for controller
+ * commands.
+ */
+static inline scb_t *
+mega_allocate_scb(adapter_t *adapter, Scsi_Cmnd *cmd)
+{
+ struct list_head *head = &adapter->free_list;
+ scb_t *scb;
+
+ /* Unlink command from Free List */
+ if( !list_empty(head) ) {
+
+ scb = list_entry(head->next, scb_t, list);
+
+ list_del_init(head->next);
+
+ scb->state = SCB_ACTIVE;
+ scb->cmd = cmd;
+ scb->dma_type = MEGA_DMA_TYPE_NONE;
+
+ return scb;
+ }
+
+ return NULL;
+}
+
+
+/**
+ * mega_runpendq()
+ * @adapter - pointer to our soft state
+ *
+ * Runs through the list of pending requests.
+ */
+static inline void
+mega_runpendq(adapter_t *adapter)
+{
+ if(!list_empty(&adapter->pending_list))
+ __mega_runpendq(adapter);
+}
+
+static void
+__mega_runpendq(adapter_t *adapter)
+{
+ scb_t *scb;
+ struct list_head *pos, *next;
+
+ /* Issue any pending commands to the card */
+ list_for_each_safe(pos, next, &adapter->pending_list) {
+
+ scb = list_entry(pos, scb_t, list);
+
+ if( !(scb->state & SCB_ISSUED) ) {
+
+ if( issue_scb(adapter, scb) != 0 )
+ return;
+ }
+ }
+
+ return;
+}
+
+
+/**
+ * issue_scb()
+ * @adapter - pointer to our soft state
+ * @scb - scsi control block
+ *
+ * Post a command to the card if the mailbox is available, otherwise return
+ * busy. We also take the scb from the pending list if the mailbox is
+ * available.
+ */
+static inline int
+issue_scb(adapter_t *adapter, scb_t *scb)
+{
+ volatile mbox64_t *mbox64 = adapter->mbox64;
+ volatile mbox_t *mbox = adapter->mbox;
+ unsigned int i = 0;
+
+ if(unlikely(mbox->busy)) {
+ do {
+ udelay(1);
+ i++;
+ } while( mbox->busy && (i < max_mbox_busy_wait) );
+
+ if(mbox->busy) return -1;
+ }
+
+ /* Copy mailbox data into host structure */
+ memcpy((char *)mbox, (char *)scb->raw_mbox, 16);
+
+ mbox->cmdid = scb->idx; /* Set cmdid */
+ mbox->busy = 1; /* Set busy */
+
+
+ /*
+ * Increment the pending queue counter
+ */
+ atomic_inc(&adapter->pend_cmds);
+
+ switch (mbox->cmd) {
+ case MEGA_MBOXCMD_EXTPTHRU:
+ if( !adapter->has_64bit_addr ) break;
+ // else fall through
+ case MEGA_MBOXCMD_LREAD64:
+ case MEGA_MBOXCMD_LWRITE64:
+ case MEGA_MBOXCMD_PASSTHRU64:
+ mbox64->xfer_segment_lo = mbox->xferaddr;
+ mbox64->xfer_segment_hi = 0;
+ mbox->xferaddr = 0xFFFFFFFF;
+ break;
+ default:
+ mbox64->xfer_segment_lo = 0;
+ mbox64->xfer_segment_hi = 0;
+ }
+
+ /*
+ * post the command
+ */
+ scb->state |= SCB_ISSUED;
+
+ if( likely(adapter->flag & BOARD_MEMMAP) ) {
+ mbox->poll = 0;
+ mbox->ack = 0;
+ WRINDOOR(adapter, adapter->mbox_dma | 0x1);
+ }
+ else {
+ irq_enable(adapter);
+ issue_command(adapter);
+ }
+
+ return 0;
+}
+
+
+/**
* issue_scb_block()
* @adapter - pointer to our soft state
* @raw_mbox - the mailbox
@@ -1979,7 +1857,6 @@
adapter_t *adapter = devp;
unsigned long flags;
-
spin_lock_irqsave(adapter->host_lock, flags);
megaraid_iombox_ack_sequence(adapter);
@@ -1996,6 +1873,99 @@
/**
+ * megaraid_iombox_ack_sequence - interrupt ack sequence for IO mapped HBAs
+ * @adapter - controller's soft state
+ *
+ * Interrupt ackrowledgement sequence for IO mapped HBAs
+ */
+static inline void
+megaraid_iombox_ack_sequence(adapter_t *adapter)
+{
+ u8 status;
+ int nstatus;
+ u8 completed[MAX_FIRMWARE_STATUS];
+ u8 byte;
+ int i;
+
+
+ /*
+ * loop till F/W has more commands for us to complete.
+ */
+ do {
+ /* Check if a valid interrupt is pending */
+ byte = irq_state(adapter);
+ if( (byte & VALID_INTR_BYTE) == 0 ) {
+ return;
+ }
+ set_irq_state(adapter, byte);
+
+ while ((nstatus = adapter->mbox->numstatus) == 0xFF) {
+ cpu_relax();
+ }
+ adapter->mbox->numstatus = 0xFF;
+
+ for (i = 0; i < nstatus; i++) {
+ while ((completed[i] = adapter->mbox->completed[i])
+ == 0xFF) {
+ cpu_relax();
+ }
+
+ adapter->mbox->completed[i] = 0xFF;
+ }
+
+ // we must read the valid status now
+ if ((status = adapter->mbox->status) == 0xFF) {
+ printk(KERN_WARNING
+ "megaraid critical: status 0xFF from firmware.\n");
+ }
+ adapter->mbox->status = 0xFF;
+
+ /*
+ * decrement the pending queue counter
+ */
+ atomic_sub(nstatus, &adapter->pend_cmds);
+
+ /* Acknowledge interrupt */
+ irq_ack(adapter);
+
+ mega_cmd_done(adapter, completed, nstatus, status);
+
+ } while(1);
+}
+
+
+/**
+ * megaraid_isr_memmapped()
+ * @irq - irq
+ * @devp - pointer to our soft state
+ * @regs - unused
+ *
+ * Interrupt service routine for memory-mapped controllers.
+ * Find out if our device is interrupting. If yes, acknowledge the
interrupt
+ * and service the completed commands.
+ */
+static void
+megaraid_isr_memmapped(int irq, void *devp, struct pt_regs *regs)
+{
+ adapter_t *adapter = devp;
+ unsigned long flags;
+
+ spin_lock_irqsave(adapter->host_lock, flags);
+
+ megaraid_memmbox_ack_sequence(adapter);
+
+ /* Loop through any pending requests */
+ if(atomic_read(&adapter->quiescent) == 0) {
+ mega_runpendq(adapter);
+ }
+
+ spin_unlock_irqrestore(adapter->host_lock, flags);
+
+ return;
+}
+
+
+/**
* megaraid_memmbox_ack_sequence - interrupt ack sequence for memory mapped
HBAs
* @adapter - controller's soft state
*
@@ -2006,7 +1976,7 @@
{
u8 status;
u32 dword = 0;
- u8 nstatus;
+ int nstatus;
u8 completed[MAX_FIRMWARE_STATUS];
int i;
@@ -2063,37 +2033,6 @@
/**
- * megaraid_isr_memmapped()
- * @irq - irq
- * @devp - pointer to our soft state
- * @regs - unused
- *
- * Interrupt service routine for memory-mapped controllers.
- * Find out if our device is interrupting. If yes, acknowledge the
interrupt
- * and service the completed commands.
- */
-static void
-megaraid_isr_memmapped(int irq, void *devp, struct pt_regs *regs)
-{
- adapter_t *adapter = devp;
- unsigned long flags;
-
-
- spin_lock_irqsave(adapter->host_lock, flags);
-
- megaraid_memmbox_ack_sequence(adapter);
-
- /* Loop through any pending requests */
- if(atomic_read(&adapter->quiescent) == 0) {
- mega_runpendq(adapter);
- }
-
- spin_unlock_irqrestore(adapter->host_lock, flags);
-
- return;
-}
-
-/**
* mega_cmd_done()
* @adapter - pointer to our soft state
* @completed - array of ids of completed commands
@@ -2102,7 +2041,7 @@
*
* Complete the comamnds and call the scsi mid-layer callback hooks.
*/
-static void
+static inline void
mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
{
mega_ext_passthru *epthru = NULL;
@@ -2404,6 +2343,18 @@
list_add(&scb->list, &adapter->free_list);
}
+
+/*
+ * Wait until the controller's mailbox is available
+ */
+static inline int
+mega_busywait_mbox (adapter_t *adapter)
+{
+ if (adapter->mbox->busy)
+ return __mega_busywait_mbox(adapter);
+ return 0;
+}
+
static int
__mega_busywait_mbox (adapter_t *adapter)
{
@@ -2434,7 +2385,7 @@
cmd = scb->cmd;
- /* return 0 elements if no data transfer */
+ // return 0 elements if no data transfer
if (!cmd->request_buffer || !cmd->request_bufflen)
return 0;
@@ -2561,43 +2512,6 @@
enquiry3->pdrv_state[i] = inquiry->pdrv_info.pdrv_state[i];
}
-static inline void
-mega_free_sgl(adapter_t *adapter)
-{
- scb_t *scb;
- int i;
-
- for(i = 0; i < adapter->max_cmds; i++) {
-
- scb = &adapter->scb_list[i];
-
- if( scb->sgl64 ) {
- pci_free_consistent(adapter->dev,
- sizeof(mega_sgl64) * adapter->sglen,
- scb->sgl64,
- scb->sgl_dma_addr);
-
- scb->sgl64 = NULL;
- }
-
- if( scb->pthru ) {
- pci_free_consistent(adapter->dev,
sizeof(mega_passthru),
- scb->pthru, scb->pthru_dma_addr);
-
- scb->pthru = NULL;
- }
-
- if( scb->epthru ) {
- pci_free_consistent(adapter->dev,
- sizeof(mega_ext_passthru),
- scb->epthru, scb->epthru_dma_addr);
-
- scb->epthru = NULL;
- }
-
- }
-}
-
/*
* Release the controller's resources
@@ -2726,7 +2640,7 @@
*/
scsi_unregister(host);
-#if defined(__x86_64__)
+#ifdef LSI_CONFIG_COMPAT
unregister_ioctl32_conversion(MEGAIOCCMD);
#endif
@@ -2735,6 +2649,44 @@
return 0;
}
+static inline void
+mega_free_sgl(adapter_t *adapter)
+{
+ scb_t *scb;
+ int i;
+
+ for(i = 0; i < adapter->max_cmds; i++) {
+
+ scb = &adapter->scb_list[i];
+
+ if( scb->sgl64 ) {
+ pci_free_consistent(adapter->dev,
+ sizeof(mega_sgl64) * adapter->sglen,
+ scb->sgl64,
+ scb->sgl_dma_addr);
+
+ scb->sgl64 = NULL;
+ }
+
+ if( scb->pthru ) {
+ pci_free_consistent(adapter->dev,
sizeof(mega_passthru),
+ scb->pthru, scb->pthru_dma_addr);
+
+ scb->pthru = NULL;
+ }
+
+ if( scb->epthru ) {
+ pci_free_consistent(adapter->dev,
+ sizeof(mega_ext_passthru),
+ scb->epthru, scb->epthru_dma_addr);
+
+ scb->epthru = NULL;
+ }
+
+ }
+}
+
+
/*
* Get information about the card/driver
*/
@@ -2835,7 +2787,6 @@
return SUCCESS;
}
-
static int
megaraid_reset(Scsi_Cmnd *cmd)
{
@@ -2903,12 +2854,10 @@
/*
* Perform the ack sequence, since interrupts are
unavailable
*/
- if( adapter->flag & BOARD_MEMMAP ) {
+ if (adapter->flag & BOARD_MEMMAP)
megaraid_memmbox_ack_sequence(adapter);
- }
- else {
+ else
megaraid_iombox_ack_sequence(adapter);
- }
spin_unlock(adapter->host_lock);
@@ -2941,7 +2890,6 @@
return rval;
}
-
#ifdef CONFIG_PROC_FS
/* Following code handles /proc fs */
@@ -3200,26 +3148,6 @@
return len;
}
-/**
- * mega_allocate_inquiry()
- * @dma_handle - handle returned for dma address
- * @pdev - handle to pci device
- *
- * allocates memory for inquiry structure
- */
-static inline caddr_t
-mega_allocate_inquiry(dma_addr_t *dma_handle, struct pci_dev *pdev)
-{
- return pci_alloc_consistent(pdev, sizeof(mega_inquiry3),
dma_handle);
-}
-
-
-static inline void
-mega_free_inquiry(caddr_t inquiry, dma_addr_t dma_handle, struct pci_dev
*pdev)
-{
- pci_free_consistent(pdev, sizeof(mega_inquiry3), inquiry,
dma_handle);
-}
-
/**
* proc_rebuild_rate()
@@ -4172,7 +4100,7 @@
}
-#if defined(__x86_64__)
+#ifdef LSI_CONFIG_COMPAT
static int
megadev_compat_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg,
struct file *filep)
@@ -4221,7 +4149,7 @@
megacmd_t mc;
megastat_t *ustats;
int num_ldrv;
- u32 uxferaddr = 0;
+ caddr_t uxferaddr=NULL;
struct pci_dev *pdev;
ustats = NULL; /* avoid compilation warnings */
@@ -4251,13 +4179,13 @@
switch( uioc.opcode ) {
case GET_DRIVER_VER:
- if( put_user(driver_ver, (u32 *)uioc.uioc_uaddr) )
+ if( put_user(driver_ver, (u32 *)uioc.u_dataaddr) )
return (-EFAULT);
break;
case GET_N_ADAP:
- if( put_user(hba_count, (u32 *)uioc.uioc_uaddr) )
+ if( put_user(hba_count, (u32 *)uioc.u_dataaddr) )
return (-EFAULT);
/*
@@ -4275,7 +4203,7 @@
if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
return (-ENODEV);
- if( copy_to_user(uioc.uioc_uaddr, mcontroller+adapno,
+ if( copy_to_user(uioc.u_dataaddr, mcontroller+adapno,
sizeof(struct mcontroller)) )
return (-EFAULT);
break;
@@ -4291,7 +4219,7 @@
adapter = hba_soft_state[adapno];
- ustats = (megastat_t *)uioc.uioc_uaddr;
+ ustats = (megastat_t *)uioc.u_dataaddr;
if( copy_from_user(&num_ldrv, &ustats->num_ldrv,
sizeof(int)) )
return (-EFAULT);
@@ -4333,7 +4261,7 @@
/*
* Which adapter
*/
- if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
+ if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
return (-ENODEV);
adapter = hba_soft_state[adapno];
@@ -4342,37 +4270,37 @@
* Deletion of logical drive is a special case. The adapter
* should be quiescent before this command is issued.
*/
- if( uioc.uioc_rmbox[0] == FC_DEL_LOGDRV &&
- uioc.uioc_rmbox[2] == OP_DEL_LOGDRV ) {
+ if( RMBOX(uioc)[0] == FC_DEL_LOGDRV ) {
+ if ( RMBOX(uioc)[2] == OP_DEL_LOGDRV ) {
+ /*
+ * Do we support this feature
+ */
+ if( !adapter->support_random_del ) {
+ printk(KERN_WARNING "megaraid:
logdrv ");
+ printk("delete on non-supporting
F/W.\n");
- /*
- * Do we support this feature
- */
- if( !adapter->support_random_del ) {
- printk(KERN_WARNING "megaraid: logdrv ");
- printk("delete on non-supporting F/W.\n");
+ return (-EINVAL);
+ }
- return (-EINVAL);
- }
+ rval = mega_del_logdrv( adapter,
RMBOX(uioc)[3] );
- rval = mega_del_logdrv( adapter, uioc.uioc_rmbox[3]
);
+ if( rval == 0 ) {
+ memset(&mc, 0, sizeof(megacmd_t));
- if( rval == 0 ) {
- memset(&mc, 0, sizeof(megacmd_t));
+ mc.status = rval;
- mc.status = rval;
+ rval = mega_n_to_m((void *)arg,
&mc);
+ }
- rval = mega_n_to_m((void *)arg, &mc);
+ return rval;
}
-
- return rval;
}
/*
* This interface only support the regular passthru
commands.
* Reject extended passthru and 64-bit passthru
*/
- if( uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU64 ||
- uioc.uioc_rmbox[0] == MEGA_MBOXCMD_EXTPTHRU ) {
+ if( RMBOX(uioc)[0] == MEGA_MBOXCMD_PASSTHRU64 ||
+ RMBOX(uioc)[0] == MEGA_MBOXCMD_EXTPTHRU ) {
printk(KERN_WARNING "megaraid: rejected
passthru.\n");
@@ -4386,7 +4314,7 @@
pdev = adapter->dev;
/* Is it a passthru command or a DCMD */
- if( uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU ) {
+ if( RMBOX(uioc)[0] == MEGA_MBOXCMD_PASSTHRU ) {
/* Passthru commands */
pthru = adapter->int_pthru;
@@ -4394,20 +4322,12 @@
/*
* The user passthru structure
*/
- upthru = (mega_passthru *)
- ((ulong)(MBOX(uioc)->xferaddr));
- /*
- * Copy in the user passthru here.
- */
- if( copy_from_user(pthru, (char *)upthru,
- sizeof(mega_passthru)) ) {
- return (-EFAULT);
- }
-
+ upthru = &uioc.pthru;
+ memcpy(pthru, (char
*)upthru,sizeof(mega_passthru));
/*
* Is there a data transfer; If the data transfer
- * length is <= INT_MEMBLK_SZ, usr the buffer
- * allocated at the load time. Otherwise, allocate
it
+ * length is <= INT_MEMBLK_SZ, usr the buffer
+ * allocated at the load time. Otherwise, allocate
it
* here.
*/
if (pthru->dataxferlen) {
@@ -4417,8 +4337,9 @@
pthru->dataxferlen,
&data_dma_hndl );
- if (data == NULL)
+ if (data == NULL) {
return (-ENOMEM);
+ }
}
else {
data = adapter->int_data;
@@ -4428,11 +4349,11 @@
* Save the user address and point the
kernel
* address at just allocated memory
*/
- uxferaddr = pthru->dataxferaddr;
+ uxferaddr = (caddr_t) uioc.u_dataaddr;
if (data_dma_hndl)
pthru->dataxferaddr = data_dma_hndl;
else
- pthru->dataxferaddr =
+ pthru->dataxferaddr =
adapter->int_data_dma_hndl;
}
@@ -4440,12 +4361,12 @@
/*
* Is data coming down-stream
*/
- if( pthru->dataxferlen && (uioc.flags & UIOC_WR) ) {
+ if(pthru->dataxferlen && (uioc.flags & UIOC_WR) ) {
/*
* Get the user data
*/
if( copy_from_user(data,
- (char *)((ulong)uxferaddr),
+ (char *)uxferaddr,
pthru->dataxferlen) ) {
rval = (-EFAULT);
goto freedata_and_return;
@@ -4471,7 +4392,7 @@
* Is data going up-stream
*/
if( pthru->dataxferlen && (uioc.flags & UIOC_RD) ) {
- if( copy_to_user((char *)((ulong)uxferaddr),
+ if( copy_to_user((char *)uxferaddr,
data, pthru->dataxferlen) )
{
rval = (-EFAULT);
}
@@ -4511,7 +4432,7 @@
else {
data = adapter->int_data;
}
- uxferaddr = MBOX(uioc)->xferaddr;
+ uxferaddr = uioc.u_dataaddr;
}
/*
@@ -4559,7 +4480,7 @@
* Is data going up-stream
*/
if( uioc.xferlen && (uioc.flags & UIOC_RD) ) {
- if( copy_to_user((char *)((ulong)uxferaddr),
+ if( copy_to_user((char *)uxferaddr,
data, uioc.xferlen) ) {
rval = (-EFAULT);
@@ -4648,18 +4569,18 @@
case MEGAIOC_QDRVRVER: /* Query driver version */
uioc->opcode = GET_DRIVER_VER;
- uioc->uioc_uaddr = uioc_mimd.data;
+ uioc->u_dataaddr = uioc_mimd.data;
break;
case MEGAIOC_QNADAP: /* Get # of adapters */
uioc->opcode = GET_N_ADAP;
- uioc->uioc_uaddr = uioc_mimd.data;
+ uioc->u_dataaddr = uioc_mimd.data;
break;
case MEGAIOC_QADAPINFO: /* Get adapter information */
uioc->opcode = GET_ADAP_INFO;
uioc->adapno = uioc_mimd.ui.fcs.adapno;
- uioc->uioc_uaddr = uioc_mimd.data;
+ uioc->u_dataaddr = uioc_mimd.data;
break;
default:
@@ -4674,9 +4595,16 @@
uioc->opcode = MBOX_CMD;
uioc->adapno = uioc_mimd.ui.fcs.adapno;
- memcpy(uioc->uioc_rmbox, uioc_mimd.mbox, 18);
+ memcpy(&uioc->u_mbox, uioc_mimd.mbox, 18);
uioc->xferlen = uioc_mimd.ui.fcs.length;
+ uioc->u_dataaddr = uioc_mimd.ui.fcs.buffer;
+
+ if (uioc_mimd.mbox[0] == MEGA_MBOXCMD_PASSTHRU ) {
+ memcpy(&uioc->pthru,&uioc_mimd.pthru,
+ sizeof(mega_passthru));
+
+ }
if( uioc_mimd.outlen ) uioc->flags = UIOC_RD;
if( uioc_mimd.inlen ) uioc->flags |= UIOC_WR;
@@ -4688,13 +4616,20 @@
uioc->opcode = MBOX_CMD;
uioc->adapno = uioc_mimd.ui.fcs.adapno;
- memcpy(uioc->uioc_rmbox, uioc_mimd.mbox, 18);
+ memcpy(&uioc->u_mbox, uioc_mimd.mbox, 18);
/*
* Choose the xferlen bigger of input and output data
*/
uioc->xferlen = uioc_mimd.outlen > uioc_mimd.inlen ?
uioc_mimd.outlen : uioc_mimd.inlen;
+ uioc->u_dataaddr = uioc_mimd.data;
+
+ if (uioc_mimd.mbox[0] == MEGA_MBOXCMD_PASSTHRU ) {
+ memcpy(&uioc->pthru,&uioc_mimd.pthru,
+ sizeof(mega_passthru));
+
+ }
if( uioc_mimd.outlen ) uioc->flags = UIOC_RD;
if( uioc_mimd.inlen ) uioc->flags |= UIOC_WR;
@@ -4735,20 +4670,14 @@
if( memcmp(signature, "MEGANIT", 7) == 0 ) {
- uiocp = (nitioctl_t *)arg;
-
- if( put_user(mc->status, (u8 *)&MBOX_P(uiocp)->status) )
- return (-EFAULT);
-
- if( mc->cmd == MEGA_MBOXCMD_PASSTHRU ) {
-
- umc = MBOX_P(uiocp);
-
- upthru = (mega_passthru *)((ulong)(umc->xferaddr));
- if( put_user(mc->status, (u8 *)&upthru->scsistatus)
)
- return (-EFAULT);
- }
+ /*
+ * NOTE: The nit ioctl is still under flux because of
+ * change of mailbox definition, in HPE. No applications yet
+ * use this interface and let's not have applications use
this
+ * interface till the new specifitions are in place.
+ */
+ return -EINVAL;
}
else {
uioc_mimd = (struct uioctl_t *)arg;
@@ -4763,8 +4692,7 @@
if (copy_from_user(&kmc, umc, sizeof(megacmd_t))) {
return -EFAULT;
}
-
- upthru = (mega_passthru *)((ulong)kmc.xferaddr);
+ upthru = (mega_passthru
*)((ulong)&uioc_mimd->pthru);
if( put_user(mc->status, (u8 *)&upthru->scsistatus)
){
return (-EFAULT);
@@ -5179,6 +5107,55 @@
}
+
+/**
+ * mega_get_ldrv_num()
+ * @adapter - pointer to our soft state
+ * @cmd - scsi mid layer command
+ * @channel - channel on the controller
+ *
+ * Calculate the logical drive number based on the information in scsi
command
+ * and the channel number.
+ */
+static inline int
+mega_get_ldrv_num(adapter_t *adapter, Scsi_Cmnd *cmd, int channel)
+{
+ int tgt;
+ int ldrv_num;
+
+ tgt = cmd->target;
+
+ if ( tgt > adapter->this_id )
+ tgt--; /* we do not get inquires for initiator id */
+
+ ldrv_num = (channel * 15) + tgt;
+
+
+ /*
+ * If we have a logical drive with boot enabled, project it first
+ */
+ if( adapter->boot_ldrv_enabled ) {
+ if( ldrv_num == 0 ) {
+ ldrv_num = adapter->boot_ldrv;
+ }
+ else {
+ if( ldrv_num <= adapter->boot_ldrv ) {
+ ldrv_num--;
+ }
+ }
+ }
+
+ /*
+ * If "delete logical drive" feature is enabled on this controller,
+ * the value returned should be 0x80+logical drive id.
+ */
+ if (adapter->support_random_del)
+ ldrv_num += 0x80;
+
+ return ldrv_num;
+}
+
+
/**
* mega_reorder_hosts()
*
@@ -5393,6 +5370,26 @@
}
+/**
+ * mega_allocate_inquiry()
+ * @dma_handle - handle returned for dma address
+ * @pdev - handle to pci device
+ *
+ * allocates memory for inquiry structure
+ */
+static inline caddr_t
+mega_allocate_inquiry(dma_addr_t *dma_handle, struct pci_dev *pdev)
+{
+ return pci_alloc_consistent(pdev, sizeof(mega_inquiry3),
dma_handle);
+}
+
+
+static inline void
+mega_free_inquiry(caddr_t inquiry, dma_addr_t dma_handle, struct pci_dev
*pdev)
+{
+ pci_free_consistent(pdev, sizeof(mega_inquiry3), inquiry,
dma_handle);
+}
+
/** mega_internal_dev_inquiry()
* @adapter - pointer to our soft state
diff -Naur old/drivers/scsi/megaraid2.h new/drivers/scsi/megaraid2.h
--- old/drivers/scsi/megaraid2.h 2005-07-15 07:52:27.000000000 -0400
+++ new/drivers/scsi/megaraid2.h 2005-08-02 13:10:04.759465328 -0400
@@ -6,7 +6,7 @@
#define MEGARAID_VERSION \
- "v2.10.8.2 (Release Date: Mon Jul 26 12:15:51 EDT 2004)\n"
+ "v2.10.10.1 (Release Date: Thu Jan 27 16:19:44 EDT 2005)\n"
/*
* Driver features - change the values to enable or disable features in the
@@ -83,6 +83,7 @@
#define INTEL_SUBSYS_VID 0x8086
#define FSC_SUBSYS_VID 0x1734
#define ACER_SUBSYS_VID 0x1025
+#define NEC_SUBSYS_VID 0x1033
#define HBA_SIGNATURE 0x3344
#define HBA_SIGNATURE_471 0xCCCC
@@ -707,15 +708,15 @@
char signature[8]; /* Must contain "MEGANIT" */
u32 opcode; /* opcode for the command */
u32 adapno; /* adapter number */
- union {
- u8 __raw_mbox[18];
- caddr_t __uaddr; /* xferaddr for non-mbox cmds */
- }__ua;
-
-#define uioc_rmbox __ua.__raw_mbox
-#define MBOX(uioc) ((megacmd_t *)&((uioc).__ua.__raw_mbox[0]))
-#define MBOX_P(uioc) ((megacmd_t *)&((uioc)->__ua.__raw_mbox[0]))
-#define uioc_uaddr __ua.__uaddr
+ mbox_t u_mbox; /* user mailbox */
+ caddr_t u_dataaddr; /* xferaddr for DCMD and non-mbox
+ commands */
+ mega_passthru pthru;
+
+#define RMBOX(uioc) ((u8 *)&(uioc).u_mbox)
+#define MBOX(uioc) ((megacmd_t *)&(uioc).u_mbox)
+#define MBOX_P(uioc) ((megacmd_t *)&(uioc)->u_mbox)
+
u32 xferlen; /* xferlen for DCMD and non-mbox
commands */
@@ -1128,7 +1129,7 @@
u32 *buffer, u32 *length);
static inline int mega_busywait_mbox (adapter_t *);
static int __mega_busywait_mbox (adapter_t *);
-static void mega_cmd_done(adapter_t *, u8 [], int, int);
+static inline void mega_cmd_done(adapter_t *, u8 [], int, int);
static inline void mega_free_sgl (adapter_t *adapter);
static void mega_8_to_40ld (mraid_inquiry *inquiry,
mega_inquiry3 *enquiry3, mega_product_info *);
@@ -1137,7 +1138,14 @@
unsigned long, void *);
static int megadev_open (struct inode *, struct file *);
-#if defined(__x86_64__)
+#if defined( __x86_64__) || defined(IA32_EMULATION)
+#ifndef __ia64__
+#define LSI_CONFIG_COMPAT
+#endif
+#endif
+
+
+#ifdef LSI_CONFIG_COMPAT
static int megadev_compat_ioctl(unsigned int, unsigned int, unsigned long,
struct file *);
#endif
---
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- application/octet-stream attachment: megaraid2_for_2.4.31.patch
- Previous message: George Anzinger: "[PATCH] Re: [PATCH] NMI watch dog notify patch"
- Next in thread: Andrey Melnikoff: "Re: [PATCH 2.4.31 1/1] scsi/megaraid2: add 64-bit application sup?port"
- Reply: Andrey Melnikoff: "Re: [PATCH 2.4.31 1/1] scsi/megaraid2: add 64-bit application sup?port"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
