Re: my kernel sometimes did a crash, but no panic

klasyk99_at_poczta.onet.pl
Date: 08/09/05

  • Next message: Bodo Eggert: "Re: Regression: radeonfb: No synchronisation on CRT with linux-2.6.13-rc5"
    To: linux-kernel@vger.kernel.org
    Date:	Tue, 09 Aug 2005 22:14:16 +0200
    
    

    Dnia 09-08-2005, wto o godzinie 16:18 -0300, Mauro Carvalho Chehab
    napisał(a):
    > Klasyk,
    >
    > Were you using bttv at the time you had this oops? It doesn't
    look to
    > be related.

    my modprobe.conf:

    alias char-major-89 i2c-dev
    snd-cmipci && { /sbin/modprobe snd-pcm-oss; /bin/true; }
    alias ieee1394-controller ohci1394
    alias eth1 8139too
    alias eth0 8139too
    options bttv card=72 pll=1 tuner=28 radio=1 video_nr=2
    options lirc_gpio gpio_mask=0x1f00 gpio_lock_mask=0x8000 gpio_xor_mask=0
    soft_gap=500 sample_rate=12

    options pwc dev_hint=740:5,740:9 power_save=0 compression=1 size=vga
    fps=5
    alias net-pf-10 ipv6
    alias /dev/nvidia* nvidia
    alias eth2 eth1394
    options snd device_mode=0666
    alias snd-card-0 snd-emu10k1
    alias sound-slot-0 snd-emu10k1
    install usb-interface /sbin/modprobe uhci-hcd; /sbin/modprobe
    ehci-hcd; /bin/true

    I don't use tv on bttv, only radio.
    I'm not sure, but maybe the crash was, when i disable
    the /usr/bin/radio. But not sure. Maybe the "q" key in radio
    was the last one what i did.

    > Maybe you can also send us some logs about your system init
    > and some description about your configuration. What's your
    Motherboard?
    > What PCI chipset does it use?

    It is asus a7v333 on via 333. Duron 1300 without overcloking.
    2x philips webcam pcvc740k, dsl eagle usb, bttv with radio,
    sb live, 2xeth, 1xeth1394

    lspci -vvv
    00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
    KT266/A/333]
            Subsystem: ASUSTeK Computer Inc. A7V333 Mainboard
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort+ >SERR- <PERR-
            Latency: 0
            Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
            Capabilities: [a0] AGP version 2.0
                    Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
    HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
                    Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW-
    Rate=x4
            Capabilities: [c0] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
    KT266/A/333 AGP] (prog-if 00 [Normal decode])
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort+ >SERR- <PERR+
            Latency: 0
            Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
            I/O behind bridge: 0000e000-0000dfff
            Memory behind bridge: eb000000-ec6fffff
            Prefetchable memory behind bridge: edf00000-efffffff
            BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
            Capabilities: [80] Power Management version 2
                    Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
    IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
            Subsystem: ASUSTeK Computer Inc.: Unknown device 808d
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 35 (500ns min, 1000ns max), cache line size 08
            Interrupt: pin A routed to IRQ 17
            Region 0: Memory at ea800000 (32-bit, non-prefetchable)
    [size=2K]
            Region 1: Memory at ea000000 (32-bit, non-prefetchable)
    [size=16K]
            Capabilities: [44] Power Management version 2
                    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1
    +,D2+,D3hot+,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME+

    00:09.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    Controller (rev 50) (prog-if 00 [UHCI])
            Subsystem: ASUSTeK Computer Inc.: Unknown device 8080
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32, cache line size 08
            Interrupt: pin A routed to IRQ 19
            Region 4: I/O ports at d800 [size=32]
            Capabilities: [80] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0
    +,D1-,D2-,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:09.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    Controller (rev 50) (prog-if 00 [UHCI])
            Subsystem: ASUSTeK Computer Inc.: Unknown device 8080
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32, cache line size 08
            Interrupt: pin B routed to IRQ 16
            Region 4: I/O ports at d400 [size=32]
            Capabilities: [80] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0
    +,D1-,D2-,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if
    20 [EHCI])
            Subsystem: ASUSTeK Computer Inc.: Unknown device 8080
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32, cache line size 10
            Interrupt: pin C routed to IRQ 17
            Region 0: Memory at e9800000 (32-bit, non-prefetchable)
    [size=256]
            Capabilities: [80] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0
    +,D1-,D2-,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video
    Capture (rev 11)
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32 (4000ns min, 10000ns max)
            Interrupt: pin A routed to IRQ 16
            Region 0: Memory at ed000000 (32-bit, prefetchable) [size=4K]
            Capabilities: [44] Vital Product Data
            Capabilities: [4c] Power Management version 2
                    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
    (rev 11)
            Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Interrupt: pin A routed to IRQ 16
            Region 0: Memory at ec800000 (32-bit, prefetchable) [size=4K]
            Capabilities: [44] Vital Product Data
            Capabilities: [4c] Power Management version 2
                    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
    RTL-8139/8139C/8139C+ (rev 10)
            Subsystem: Realtek Semiconductor Co., Ltd. RT8139
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32 (8000ns min, 16000ns max)
            Interrupt: pin A routed to IRQ 17
            Region 0: I/O ports at d000 [size=256]
            Region 1: Memory at e9000000 (32-bit, non-prefetchable)
    [size=256]
            Expansion ROM at <unassigned> [disabled] [size=64K]
            Capabilities: [50] Power Management version 2
                    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1
    +,D2+,D3hot+,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:0f.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
    04)
            Subsystem: Creative Labs CT4850 SBLive! Value
            Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32 (500ns min, 5000ns max)
            Interrupt: pin A routed to IRQ 18
            Region 0: I/O ports at b800 [size=32]
            Capabilities: [dc] Power Management version 1
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:0f.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
    (rev 01)
            Subsystem: Creative Labs Gameport Joystick
            Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32
            Region 0: I/O ports at b400 [size=8]
            Capabilities: [dc] Power Management version 1
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
    RTL-8139/8139C/8139C+ (rev 10)
            Subsystem: Realtek Semiconductor Co., Ltd. RT8139
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32 (8000ns min, 16000ns max)
            Interrupt: pin A routed to IRQ 19
            Region 0: I/O ports at b000 [size=256]
            Region 1: Memory at e8800000 (32-bit, non-prefetchable)
    [size=256]
            Expansion ROM at <unassigned> [disabled] [size=64K]
            Capabilities: [50] Power Management version 2
                    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1
    +,D2+,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
            Subsystem: ASUSTeK Computer Inc.: Unknown device 808c
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping+ SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 0
            Capabilities: [c0] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:11.1 IDE interface: VIA Technologies, Inc.
    VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
    (prog-if 8a [Master SecP PriP])
            Subsystem: ASUSTeK Computer Inc. A7V8X motherboard
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32
            Interrupt: pin A routed to IRQ 0
            Region 4: I/O ports at a800 [size=16]
            Capabilities: [c0] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    Controller (rev 23) (prog-if 00 [UHCI])
            Subsystem: ASUSTeK Computer Inc. VT6202 USB2.0 4 port controller
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32, cache line size 08
            Interrupt: pin D routed to IRQ 21
            Region 4: I/O ports at a400 [size=32]
            Capabilities: [80] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    Controller (rev 23) (prog-if 00 [UHCI])
            Subsystem: ASUSTeK Computer Inc. VT6202 USB2.0 4 port controller
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32, cache line size 08
            Interrupt: pin D routed to IRQ 21
            Region 4: I/O ports at a000 [size=32]
            Capabilities: [80] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA
    TNT2/TNT2 Pro] (rev 15) (prog-if 00 [VGA])
            Subsystem: nVidia Corporation RIVA TNT2 Pro
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 248 (1250ns min, 250ns max)
            Interrupt: pin A routed to IRQ 16
            Region 0: Memory at eb000000 (32-bit, non-prefetchable)
    [size=16M]
            Region 1: Memory at ee000000 (32-bit, prefetchable) [size=32M]
            Expansion ROM at edff0000 [disabled] [size=64K]
            Capabilities: [60] Power Management version 1
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
            Capabilities: [44] AGP version 2.0
                    Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
    HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
                    Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit-
    FW- Rate=x4

    Log when the system started:
    (I mixed a little in scripts with the usb drivers when linux is loading)

    Aug 8 23:56:55 o syslogd 1.4.1: restart.
    Aug 8 23:56:56 o dhclient: eth2: unknown hardware address type 24
    Aug 8 23:56:56 o kernel: klogd 1.4.1, log source = /proc/kmsg started.
    Aug 8 23:56:56 o kernel: Inspecting /boot/System.map
    Aug 8 23:56:56 o kernel: Loaded 20310 symbols from /boot/System.map.
    Aug 8 23:56:56 o kernel: Symbols match kernel version 2.6.11.
    Aug 8 23:56:56 o kernel: No module symbols loaded - kernel modules not
    enabled.
    Aug 8 23:56:56 o kernel: Linux version 2.6.11-12mdkcustom (root@o) (gcc
    version 3.4.3 (Mandrakelinux 10.2 3.4.3-7mdk)) #
    2 Sat Aug 6 11:02:20 CEST 2005
    Aug 8 23:56:56 o kernel: BIOS-provided physical RAM map:
    Aug 8 23:56:56 o kernel: BIOS-e820: 0000000000000000 -
    000000000009fc00 (usable)
    Aug 8 23:56:56 o kernel: BIOS-e820: 000000000009fc00 -
    00000000000a0000 (reserved)
    Aug 8 23:56:56 o kernel: BIOS-e820: 00000000000f0000 -
    0000000000100000 (reserved)
    Aug 8 23:56:56 o kernel: BIOS-e820: 0000000000100000 -
    000000004fffc000 (usable)
    Aug 8 23:56:56 o kernel: BIOS-e820: 000000004fffc000 -
    000000004ffff000 (ACPI data)
    Aug 8 23:56:56 o kernel: BIOS-e820: 000000004ffff000 -
    0000000050000000 (ACPI NVS)
    Aug 8 23:56:56 o partmon: Sprawdzanie czy na partycjach jest
    wystarczająca ilość miejsca:
    Aug 8 23:56:56 o kernel: BIOS-e820: 00000000fec00000 -
    00000000fec01000 (reserved)
    Aug 8 23:56:56 o kernel: BIOS-e820: 00000000fee00000 -
    00000000fee01000 (reserved)
    Aug 8 23:56:56 o kernel: BIOS-e820: 00000000ffff0000 -
    0000000100000000 (reserved)
    Aug 8 23:56:56 o kernel: 383MB HIGHMEM available.
    Aug 8 23:56:57 o kernel: 896MB LOWMEM available.
    Aug 8 23:56:57 o kernel: On node 0 totalpages: 327676
    Aug 8 23:56:57 o kernel: DMA zone: 4096 pages, LIFO batch:1
    Aug 8 23:56:57 o kernel: Normal zone: 225280 pages, LIFO batch:16
    Aug 8 23:56:57 o kernel: HighMem zone: 98300 pages, LIFO batch:16
    Aug 8 23:56:57 o kernel: DMI 2.3 present.
    Aug 8 23:56:57 o kernel: ACPI: RSDP (v000
    ASUS ) @ 0x000f5c30
    Aug 8 23:56:57 o kernel: ACPI: RSDT (v001 ASUS A7V333 0x42302e31
    MSFT 0x31313031) @ 0x4fffc000
    Aug 8 23:56:57 o partmon: ^[[65G
    Aug 8 23:56:57 o kernel: ACPI: FADT (v001 ASUS A7V333 0x42302e31
    MSFT 0x31313031) @ 0x4fffc0b2
    Aug 8 23:56:57 o partmon:
    Aug 8 23:56:57 o kernel: ACPI: BOOT (v001 ASUS A7V333 0x42302e31
    MSFT 0x31313031) @ 0x4fffc030
    Aug 8 23:56:57 o rc: Uruchamianie partmon: succeeded
    Aug 8 23:56:57 o kernel: ACPI: MADT (v001 ASUS A7V333 0x42302e31
    MSFT 0x31313031) @ 0x4fffc058
    Aug 8 23:56:57 o kernel: ACPI: DSDT (v001 ASUS A7V333 0x00001000
    MSFT 0x0100000b) @ 0x00000000
    Aug 8 23:56:57 o kernel: ACPI: PM-Timer IO Port: 0xe408
    Aug 8 23:56:57 o kernel: ACPI: Local APIC address 0xfee00000
    Aug 8 23:56:58 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
    67 interval 6
    Aug 8 23:56:58 o kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00]
    enabled)
    Aug 8 23:56:58 o xfs: Uruchamianie xfs succeeded
    Aug 8 23:55:25 o rc.sysinit: Setting default font (lat2-sun16):
    succeeded
    Aug 8 23:56:58 o xfs[5533]: ignoring font path
    element /usr/X11R6/lib/X11/fonts/drakfont/Type1 (unreadable)
    Aug 8 23:56:58 o kernel: Processor #0 6:7 APIC version 16
    Aug 8 23:55:25 o rc.sysinit: Montowanie systemu plików proc succeeded
    Aug 8 23:56:58 o xfs[5533]: ignoring font path
    element /usr/X11R6/lib/X11/fonts/drakfont/ttf (unreadable)
    Aug 8 23:56:58 o kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge
    lint[0x1])
    Aug 8 23:55:25 o rc.sysinit: Montowanie sysfs na /sys succeeded
    Aug 8 23:56:58 o numlock: Uruchamianie klawiatury numerycznej:
    Aug 8 23:56:58 o xfs[5533]: ignoring font path
    element /usr/X11R6/lib/X11/fonts/100dpi:unscaled (unreadable)
    Aug 8 23:56:58 o kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000]
    gsi_base[0])
    Aug 8 23:55:25 o devfsd: Started device management daemon v1.3.25
    for /dev
    Aug 8 23:56:58 o numlock:
    Aug 8 23:56:59 o kernel: IOAPIC[0]: apic_id 2, version 2, address
    0xfec00000, GSI 0-23
    Aug 8 23:55:26 o devfsd: error
    execing: /etc/dynamic/scripts/part.script^INo such file or directory
    Aug 8 23:56:59 o kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq
    2 dfl edge)
    Aug 8 23:56:59 o rc: Uruchamianie numlock: succeeded
    Aug 8 23:55:26 o devfsd: error
    execing: /etc/dynamic/scripts/part.script^INo such file or directory
    Aug 8 23:56:59 o kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq
    9 low level)
    Aug 8 23:55:26 o devfsd: error
    execing: /etc/dynamic/scripts/part.script^INo such file or directory
    Aug 8 23:56:59 o kernel: ACPI: IRQ0 used by override.
    Aug 8 23:55:26 o devfsd: error
    execing: /etc/dynamic/scripts/part.script^INo such file or directory
    Aug 8 23:57:00 o kernel: ACPI: IRQ2 used by override.
    Aug 8 23:55:28 o rc.sysinit: Uruchamianie demona DevFs succeeded
    Aug 8 23:57:00 o kernel: ACPI: IRQ9 used by override.
    Aug 8 23:55:28 o rc.sysinit: Konfiguracja parametrów jądra: succeeded
    Aug 8 23:57:00 o kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
    Aug 8 23:55:28 o pam_console.dev[1046]: Restoring console permissions
    for /dev/vcs1
    Aug 8 23:57:00 o kernel: Using ACPI (MADT) for SMP configuration
    information
    Aug 8 23:55:28 o pam_console.dev[1047]: Restoring console permissions
    for /dev/vcsa1
    Aug 8 23:57:00 o su(pam_unix)[5660]: session opened for user nobody by
    (uid=0)
    Aug 8 23:57:00 o kernel: Allocating PCI resources starting at 50000000
    (gap: 50000000:aec00000)
    Aug 8 23:55:28 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
    Aug 8 23:57:00 o kernel: Built 1 zonelists
    Aug 8 23:55:28 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
    Aug 8 23:57:00 o kernel: mapped APIC to ffffd000 (fee00000)
    Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
    "/lib/dev-state/vcsa1"
    Aug 8 23:57:00 o kernel: mapped IOAPIC to ffffc000 (fec00000)
    Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
    "/lib/dev-state/vcsa1"
    Aug 8 23:57:01 o kernel: Initializing CPU#0
    Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
    "/lib/dev-state/vcsa1"
    Aug 8 23:57:01 o kernel: Kernel command line:
    BOOT_IMAGE=MOJ_2_6_11____12 ro root=301 resume=/dev/hda5 devfs=mount
    Aug 8 23:55:28 o pam_console.dev[1090]: Restoring console permissions
    for /dev/vcsa1
    Aug 8 23:57:01 o su(pam_unix)[5660]: session closed for user nobody
    Aug 8 23:57:01 o kernel: PID hash table entries: 4096 (order: 12, 65536
    bytes)
    Aug 8 23:55:29 o devfsd[1032]: error copying: "/dev/vcs1" to
    "/lib/dev-state/vcs1"
    Aug 8 23:57:01 o mDNSResponder: Uruchamianie succeeded
    Aug 8 23:57:01 o kernel: Detected 1303.663 MHz processor.
    Aug 8 23:55:29 o devfsd[1032]: error copying: "/dev/vcs1" to
    "/lib/dev-state/vcs1"
    Aug 8 23:57:01 o kernel: Using pmtmr for high-res timesource
    Aug 8 23:55:29 o devfsd[1032]: error copying: "/dev/vcs1" to
    "/lib/dev-state/vcs1"
    Aug 8 23:57:01 o kernel: Console: colour VGA+ 80x25
    Aug 8 23:55:29 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
    Aug 8 23:57:01 o kernel: Dentry cache hash table entries: 131072
    (order: 7, 524288 bytes)
    Aug 8 23:55:29 o pam_console.dev[1106]: Restoring console permissions
    for /dev/vcs1
    Aug 8 23:57:02 o kernel: Inode-cache hash table entries: 65536 (order:
    6, 262144 bytes)
    Aug 8 23:57:02 o atd: Uruchamianie atd succeeded
    Aug 8 23:55:27 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
    Aug 8 23:57:02 o kernel: Memory: 1294696k/1310704k available (2635k
    kernel code, 15188k reserved, 765k data, 268k init, 39
    3200k highmem, 0k BadRAM)
    Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
    "/lib/dev-state/vcsa1"
    Aug 8 23:57:02 o kernel: Checking if this processor honours the WP bit
    even in supervisor mode... Ok.
    Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
    "/lib/dev-state/vcsa1"
    Aug 8 23:57:02 o kernel: Calibrating delay loop... 2580.48 BogoMIPS
    (lpj=1290240)
    Aug 8 23:57:02 o smartd[5715]: smartd version 5.33
    [i586-mandrake-linux-gnu] Copyright (C) 2002-4 Bruce Allen
    Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
    "/lib/dev-state/vcsa1"
    Aug 8 23:57:02 o kernel: Mount-cache hash table entries: 512 (order: 0,
    4096 bytes)
    Aug 8 23:57:02 o smartd[5715]: Home page is
    http://smartmontools.sourceforge.net/
    Aug 8 23:55:27 o date: Mon Aug 8 23:55:27 CEST 2005
    Aug 8 23:57:02 o kernel: CPU: After generic identify, caps: 0383fbff
    c1c3fbff 00000000 00000000 00000000 00000000 00000000
    Aug 8 23:57:02 o smartd[5715]: Opened configuration
    file /etc/smartd.conf
    Aug 8 23:55:27 o rc.sysinit: Ustawianie zegara (utc): Mon Aug 8
    23:55:27 CEST 2005 succeeded
    Aug 8 23:57:02 o kernel: CPU: After vendor identify, caps: 0383fbff
    c1c3fbff 00000000 00000000 00000000 00000000 00000000
    Aug 8 23:57:02 o smartd[5715]: Configuration file /etc/smartd.conf was
    parsed, found DEVICESCAN, scanning devices
    Aug 8 23:55:27 o pam_console.dev[1137]: Restoring console permissions
    for /dev/vcsa1
    Aug 8 23:57:02 o kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache
    64K (64 bytes/line)
    Aug 8 23:57:02 o smartd[5715]: Device: /dev/hda, opened
    Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcs1" to
    "/lib/dev-state/vcs1"
    Aug 8 23:57:02 o kernel: CPU: L2 Cache: 64K (64 bytes/line)
    Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcs1" to
    "/lib/dev-state/vcs1"
    Aug 8 23:57:02 o smartd[5715]: Device: /dev/hda, found in smartd
    database.
    Aug 8 23:57:02 o kernel: CPU: After all inits, caps: 0383fbff c1c3fbff
    00000000 00000020 00000000 00000000 00000000
    Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcs1" to
    "/lib/dev-state/vcs1"
    Aug 8 23:57:02 o smartd[5715]: Device: /dev/hda, enabled SMART
    Attribute Autosave.
    Aug 8 23:57:02 o kernel: Intel machine check architecture supported.
    Aug 8 23:55:27 o rc.sysinit: Ładowanie domyślnej mapy klawiatury
    succeeded
    Aug 8 23:57:03 o kernel: Intel machine check reporting enabled on
    CPU#0.
    Aug 8 23:57:03 o smartd[5715]: Device: /dev/hda, enabled SMART
    Automatic Offline Testing.
    Aug 8 23:55:27 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
    Aug 8 23:57:03 o kernel: CPU: AMD Duron(TM) stepping 01
    Aug 8 23:57:03 o smartd[5715]: Device: /dev/hda, appears to lack SMART
    Self-Test log; disabling -l selftest (override with
    -T permissive Directive)
    Aug 8 23:55:27 o pam_console.dev[1160]: Restoring console permissions
    for /dev/vcs1
    Aug 8 23:57:03 o kernel: Enabling fast FPU save and restore... done.
    Aug 8 23:57:03 o smartd[5715]: Device: /dev/hda, appears to lack SMART
    Error log; disabling -l error (override with -T per
    missive Directive)
    Aug 8 23:55:27 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
    Aug 8 23:57:03 o kernel: Enabling unmasked SIMD FPU exception
    support... done.
    Aug 8 23:57:03 o smartd[5715]: Device: /dev/hda, is SMART capable.
    Adding to "monitor" list.
    Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
    "/lib/dev-state/vcsa1"
    Aug 8 23:57:03 o kernel: Checking 'hlt' instruction... OK.
    Aug 8 23:57:03 o smartd[5715]: Device: /dev/hdb, opened
    Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
    "/lib/dev-state/vcsa1"
    Aug 8 23:57:03 o kernel: ENABLING IO-APIC IRQs
    Aug 8 23:57:03 o smartd[5715]: Device: /dev/hdb, found in smartd
    database.
    Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcsa1" to
    "/lib/dev-state/vcsa1"
    Aug 8 23:57:03 o kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
    Aug 8 23:57:03 o smartd[5715]: Device: /dev/hdb, enabled SMART
    Attribute Autosave.
    Aug 8 23:55:27 o rc.sysinit: Ustawianie nazwy hosta o: succeeded
    Aug 8 23:57:03 o kernel: NET: Registered protocol family 16
    Aug 8 23:57:04 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
    67 interval 8
    Aug 8 23:55:27 o pam_console.dev[1185]: Restoring console permissions
    for /dev/vcsa1
    Aug 8 23:57:04 o smartd[5715]: Device: /dev/hdb, is SMART capable.
    Adding to "monitor" list.
    Aug 8 23:57:04 o kernel: PCI: Using configuration type 1
    Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcs1" to
    "/lib/dev-state/vcs1"
    Aug 8 23:57:04 o smartd[5715]: Monitoring 2 ATA and 0 SCSI devices
    Aug 8 23:57:04 o kernel: mtrr: v2.0 (20020519)
    Aug 8 23:55:27 o devfsd[1032]: error copying: "/dev/vcs1" to
    "/lib/dev-state/vcs1"
    Aug 8 23:57:04 o kernel: ACPI: Subsystem revision 20050211
    Aug 8 23:57:05 o smartd[5715]: Device: /dev/hdb, SMART Usage Attribute:
    194 Temperature_Celsius changed from 76 to 75
    Aug 8 23:55:27 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
    Aug 8 23:57:05 o kernel: ACPI: Interpreter enabled
    Aug 8 23:57:05 o smartd[5717]: smartd has fork()ed into background
    mode. New PID=5717.
    Aug 8 23:55:27 o pam_console.dev[1213]: Restoring console permissions
    for /dev/vcs1
    Aug 8 23:57:05 o smartd: Uruchamianie smartd succeeded
    Aug 8 23:57:05 o kernel: ACPI: Using IOAPIC for interrupt routing
    Aug 8 23:55:28 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
    Aug 8 23:57:05 o kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6
    7 10 *11 12 14 15)
    Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
    "/lib/dev-state/vcsa1"
    Aug 8 23:57:05 o kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6
    7 10 11 12 14 15) *9
    Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
    "/lib/dev-state/vcsa1"
    Aug 8 23:57:05 o kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6
    7 10 11 12 14 15)
    Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
    "/lib/dev-state/vcsa1"
    Aug 8 23:57:06 o kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6
    7 10 11 12 14 15) *9
    Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
    "/lib/dev-state/vcs1"
    Aug 8 23:57:06 o kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6
    7 *10 11 12 14)
    Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
    "/lib/dev-state/vcs1"
    Aug 8 23:57:06 o kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
    Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
    "/lib/dev-state/vcs1"
    Aug 8 23:57:06 o kernel: PCI: Probing PCI hardware (bus 00)
    Aug 8 23:55:28 o pam_console.dev[1255]: Restoring console permissions
    for /dev/vcsa1
    Aug 8 23:57:06 o kernel: PCI: Via IRQ fixup
    Aug 8 23:55:28 o pam_console.dev[1273]: Restoring console permissions
    for /dev/vcs1
    Aug 8 23:57:06 o net.agent[5766]: how do I bring interfaces up on this
    distro?
    Aug 8 23:57:06 o kernel: ACPI: PCI Interrupt Routing Table
    [\_SB_.PCI0._PRT]
    Aug 8 23:55:28 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
    Aug 8 23:57:06 o net.agent[5766]: add event not handled
    Aug 8 23:57:06 o kernel: ACPI: PCI Interrupt Routing Table
    [\_SB_.PCI0.PCI1._PRT]
    Aug 8 23:55:28 o devfsd[1032]: error calling: "unlink" in "GLOBAL"
    Aug 8 23:57:06 o kernel: Linux Plug and Play Support v0.97 (c) Adam
    Belay
    Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
    "/lib/dev-state/vcsa1"
    Aug 8 23:57:06 o kernel: pnp: PnP ACPI init
    Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
    "/lib/dev-state/vcsa1"
    Aug 8 23:57:06 o kernel: pnp: PnP ACPI: found 14 devices
    Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcsa1" to
    "/lib/dev-state/vcsa1"
    Aug 8 23:57:06 o kernel: PnPBIOS: Disabled
    Aug 8 23:55:28 o pam_console.dev[1341]: Restoring console permissions
    for /dev/vcsa1
    Aug 8 23:57:06 o kernel: PCI: Using ACPI for IRQ routing
    Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
    "/lib/dev-state/vcs1"
    Aug 8 23:57:06 o sshd: uruchamianie succeeded
    Aug 8 23:57:06 o kernel: ** PCI interrupts are no longer routed
    automatically. If this
    Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
    "/lib/dev-state/vcs1"
    Aug 8 23:57:06 o kernel: ** causes a device to stop working, it is
    probably because the
    Aug 8 23:57:06 o sshd[5795]: Server listening on :: port 443.
    Aug 8 23:55:28 o devfsd[1032]: error copying: "/dev/vcs1" to
    "/lib/dev-state/vcs1"
    Aug 8 23:57:06 o kernel: ** driver failed to call pci_enable_device().
    As a temporary
    Aug 8 23:57:06 o sshd[5795]: error: Bind to port 443 on 0.0.0.0 failed:
    Address already in use.
    Aug 8 23:55:28 o pam_console.dev[1357]: Restoring console permissions
    for /dev/vcs1
    Aug 8 23:57:06 o kernel: ** workaround, the "pci=routeirq" argument
    restores the old
    Aug 8 23:56:05 o modprobe: WARNING: Error inserting snd
    (/lib/modules/2.6.11-12mdkcustom/kernel/sound/core/snd.ko): Unknow
    n symbol in module, or unknown parameter (see dmesg) <29>Aug 8
    23:56:05 modprobe: WARNING: Error inserting snd-seq-device (
    /lib/modules/2.6.11-12mdkcustom/kernel/sound/core/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see
    dmesg)
    Aug 8 23:57:06 o kernel: ** behavior. If this argument makes the
    device work again,
    Aug 8 23:56:05 o usb.agent[1795]: ... can't load module snd-usb-audio
    Aug 8 23:57:06 o kernel: ** please email the output of "lspci" to
    bjorn.helgaas@hp.com
    Aug 8 23:56:05 o usb.agent[1795]: missing kernel or user mode driver
    snd-usb-audio
    Aug 8 23:57:07 o kernel: ** so I can fix the driver.
    Aug 8 23:57:07 o xinetd: Uruchamianie xinetd succeeded
    Aug 8 23:56:06 o usb: Inicjalizacja kontrolera USB (uhci-hcd):
    succeeded
    Aug 8 23:57:07 o xinetd[5813]: Reading included configuration
    file: /etc/xinetd.d/cups-lpd [file=/etc/xinetd.conf] [line=1
    5]
    Aug 8 23:57:07 o kernel: pnp: 00:01: ioport range 0xe400-0xe47f could
    not be reserved
    Aug 8 23:56:06 o usb: Inicjalizacja kontrolera USB (ehci-hcd):
    succeeded
    Aug 8 23:57:09 o vsftpd: vsftpd vsftpd succeeded
    Aug 8 23:57:09 o xinetd[5813]: Reading included configuration
    file: /etc/xinetd.d/cvs [file=/etc/xinetd.d/cvs] [line=15]
    Aug 8 23:57:09 o kernel: pnp: 00:01: ioport range 0xe800-0xe81f has
    been reserved
    Aug 8 23:56:06 o usb: Montowanie systemu plików USB succeeded
    Aug 8 23:57:09 o xinetd[5813]: Reading included configuration
    file: /etc/xinetd.d/imap [file=/etc/xinetd.d/imap] [line=12]
    Aug 8 23:57:09 o dhcpd: Not searching LDAP since ldap-server, ldap-port
    and ldap-base-dn were not specified in the config
    file
    Aug 8 23:57:09 o kernel: pnp: 00:0d: ioport range 0x290-0x291 has been
    reserved
    Aug 8 23:56:07 o modprobe: cupsd: no process killed
    Aug 8 23:57:09 o xinetd[5813]: Reading included configuration
    file: /etc/xinetd.d/imaps [file=/etc/xinetd.d/imaps] [line=1
    4]
    Aug 8 23:57:09 o dhcpd: Wrote 0 deleted host decls to leases file.
    Aug 8 23:57:09 o kernel: pnp: 00:0d: ioport range 0x370-0x372 has been
    reserved
    Aug 8 23:56:07 o usb: Ładowanie modułu kernela dla drukarki USB
    succeeded
    Aug 8 23:57:10 o xinetd[5813]: Reading included configuration
    file: /etc/xinetd.d/ipop2 [file=/etc/xinetd.d/ipop2] [line=1
    4]
    Aug 8 23:57:10 o dhcpd: Wrote 0 new dynamic host decls to leases file.
    Aug 8 23:57:10 o kernel: Simple Boot Flag at 0x3a set to 0x1
    Aug 8 23:56:12 o fsck: /dev/hda1: clean, 393053/3499328 files,
    4493127/6986259 blocks
    Aug 8 23:57:10 o xinetd[5813]: Reading included configuration
    file: /etc/xinetd.d/ipop3 [file=/etc/xinetd.d/ipop3] [line=1
    5]
    Aug 8 23:57:10 o dhcpd: Wrote 0 leases to leases file.
    Aug 8 23:57:10 o kernel: apm: BIOS version 1.2 Flags 0x03 (Driver
    version 1.16ac)
    Aug 8 23:56:12 o rc.sysinit: Ponowne montowanie gł. systemu plików w
    trybie do odczytu i zapisu: succeeded
    Aug 8 23:57:10 o xinetd[5813]: Reading included configuration
    file: /etc/xinetd.d/pop3s [file=/etc/xinetd.d/pop3s] [line=1
    3]
    Aug 8 23:57:10 o kernel: apm: overridden by ACPI.
    Aug 8 23:57:10 o dhcpd:
    Aug 8 23:56:15 o rc.sysinit: Aktywacja partycji wymiany: succeeded
    Aug 8 23:57:10 o xinetd[5813]: Reading included configuration
    file: /etc/xinetd.d/rsync [file=/etc/xinetd.d/rsync] [line=1
    3]
    Aug 8 23:57:10 o kernel: audit: initializing netlink socket (disabled)
    Aug 8 23:57:10 o dhcpd: No subnet declaration for eth0 (192.168.1.232).
    Aug 8 23:56:16 o : Loading module: nvidia
    Aug 8 23:57:10 o xinetd[5813]: Reading included configuration
    file: /etc/xinetd.d/sshd-xinetd [file=/etc/xinetd.d/sshd-xin
    etd] [line=13]
    Aug 8 23:57:10 o kernel: audit(1123538119.408:0): initialized
    Aug 8 23:57:10 o dhcpd: ** Ignoring requests on eth0. If this is not
    what
    Aug 8 23:56:17 o : Loading module: bttv
    Aug 8 23:57:10 o xinetd[5813]: removing printer
    Aug 8 23:57:10 o kernel: highmem bounce pool size: 64 pages
    Aug 8 23:57:10 o dhcpd: you want, please write a subnet declaration
    Aug 8 23:56:18 o : Loading module: bt878
    Aug 8 23:57:10 o xinetd[5813]: removing cvspserver
    Aug 8 23:57:10 o kernel: Total HugeTLB memory allocated, 0
    Aug 8 23:57:10 o dhcpd: in your dhcpd.conf file for the network
    segment
    Aug 8 23:56:18 o : Loading module: via-agp
    Aug 8 23:57:10 o xinetd[5813]: removing imap
    Aug 8 23:57:10 o kernel: inotify device minor=63
    Aug 8 23:57:10 o dhcpd: to which interface eth0 is attached. **
    Aug 8 23:56:19 o fsck: /dev/hdb1: recovering journal
    Aug 8 23:57:10 o xinetd[5813]: removing imaps
    Aug 8 23:57:10 o kernel: VFS: Disk quotas dquot_6.5.1
    Aug 8 23:57:10 o dhcpd:
    Aug 8 23:56:21 o fsck: /dev/hdb1: clean, 124308/7340032 files,
    7477522/14657296 blocks
    Aug 8 23:57:11 o xinetd[5813]: removing pop2
    Aug 8 23:57:11 o kernel: Dquot-cache hash table entries: 1024 (order 0,
    4096 bytes)
    Aug 8 23:56:22 o rc.sysinit: Montowanie lokalnych systemów plików:
    succeeded
    Aug 8 23:57:11 o xinetd[5813]: removing rsync
    Aug 8 23:57:11 o dhcpd: Uruchamianie dhcpd succeeded
    Aug 8 23:57:11 o kernel: devfs: 2004-01-31 Richard Gooch
    (rgooch@atnf.csiro.au)
    Aug 8 23:56:22 o rc.sysinit: Montowanie plikopartycji: succeeded
    Aug 8 23:57:11 o xinetd[5813]: removing ssh
    Aug 8 23:57:11 o kernel: devfs: boot_options: 0x1
    Aug 8 23:56:23 o loadkeys:
    Loading /usr/lib/kbd/keymaps/i386/qwerty/pl.kmap.gz
    Aug 8 23:57:11 o xinetd[5813]: xinetd Version 2.3.13 started with
    libwrap options compiled in.
    Aug 8 23:57:11 o kernel: Supermount version 2.0.4 for kernel 2.6
    Aug 8 23:57:11 o loadkeys:
    Loading /usr/lib/kbd/keymaps/i386/qwerty/pl.kmap.gz
    Aug 8 23:56:24 o pam_console.dev[3126]: Restoring console permissions
    for /dev/dsp
    Aug 8 23:57:11 o xinetd[5813]: Started working: 2 available services
    Aug 8 23:57:11 o kernel: Initializing Cryptographic API
    Aug 8 23:57:11 o keytable: Ładowanie mapy klawiatury: pl succeeded
    Aug 8 23:56:24 o pam_console.dev[3124]: Restoring console permissions
    for /dev/snd/pcmC2D1c
    Aug 8 23:57:11 o kernel: isapnp: Scanning for PnP cards...
    Aug 8 23:56:24 o pam_console.dev[3114]: Restoring console permissions
    for /dev/dsp1
    Aug 8 23:57:11 o kernel: isapnp: No Plug & Play device found
    Aug 8 23:57:11 o loadkeys:
    Loading /usr/lib/kbd/keymaps/include/compose.latin2.inc.gz
    Aug 8 23:56:24 o pam_console.dev[3110]: Restoring console permissions
    for /dev/audio2
    Aug 8 23:57:11 o kernel: Real Time Clock Driver v1.12
    Aug 8 23:56:24 o pam_console.dev[3100]: Restoring console permissions
    for /dev/mixer2
    ug 8 23:57:11 o kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Aug 8 23:56:24 o pam_console.dev[3096]: Restoring console permissions
    for /dev/mixer1
    Aug 8 23:57:11 o keytable: Ładowanie klawiszy kompozycji:
    compose.latin2.inc succeeded
    Aug 8 23:57:11 o kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Aug 8 23:56:24 o pam_console.dev[3052]: Restoring console permissions
    for /dev/nvidiactl
    Aug 8 23:57:11 o kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8
    ports, IRQ sharing enabled
    Aug 8 23:56:24 o pam_console.dev[3037]: Restoring console permissions
    for /dev/snd/pcmC2D0p
    Aug 8 23:57:11 o kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Aug 8 23:56:24 o pam_console.dev[3092]: Restoring console permissions
    for /dev/mixer
    Aug 8 23:57:11 o kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Aug 8 23:56:24 o pam_console.dev[3027]: Restoring console permissions
    for /dev/snd/pcmC2D2p
    Aug 8 23:57:11 o kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Aug 8 23:56:24 o pam_console.dev[3023]: Restoring console permissions
    for /dev/snd/pcmC2D3p
    Aug 8 23:57:11 o kernel: io scheduler noop registered
    Aug 8 23:56:24 o pam_console.dev[3076]: Restoring console permissions
    for /dev/dsp2
    Aug 8 23:57:11 o kernel: io scheduler anticipatory registered
    Aug 8 23:57:11 o keytable: succeeded
    Aug 8 23:56:24 o pam_console.dev[3072]: Restoring console permissions
    for /dev/snd/controlC2
    Aug 8 23:57:11 o kernel: io scheduler deadline registered
    Aug 8 23:56:24 o pam_console.dev[3015]: Restoring console permissions
    for /dev/snd/pcmC1D0c
    Aug 8 23:57:11 o kernel: io scheduler cfq registered
    Aug 8 23:56:24 o pam_console.dev[3011]: Restoring console permissions
    for /dev/snd/controlC0
    Aug 8 23:57:11 o kernel: RAMDISK driver initialized: 16 RAM disks of
    32000K size 1024 blocksize
    Aug 8 23:56:24 o pam_console.dev[3068]: Restoring console permissions
    for /dev/snd/pcmC2D0c
    Aug 8 23:57:11 o kernel: pktcdvd: v0.2.0a 2004-07-14 Jens Axboe
    (axboe@suse.de) and petero2@telia.com
    Aug 8 23:56:24 o pam_console.dev[3064]: Restoring console permissions
    for /dev/snd/midiC2D0
    Aug 8 23:57:11 o kernel: Uniform Multi-Platform E-IDE driver Revision:
    7.00alpha2
    Aug 8 23:56:24 o pam_console.dev[3007]: Restoring console permissions
    for /dev/snd/pcmC0D0c
    Aug 8 23:57:12 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
    67 interval 7
    Aug 8 23:57:12 o kernel: ide: Assuming 33MHz system bus speed for PIO
    modes; override with idebus=xx
    Aug 8 23:56:24 o pam_console.dev[3031]: Restoring console permissions
    for /dev/snd/pcmC2D2c
    Aug 8 23:57:12 o kernel: VP_IDE: IDE controller at PCI slot
    0000:00:11.1
    Aug 8 23:56:24 o pam_console.dev[3019]: Restoring console permissions
    for /dev/snd/controlC1
    Aug 8 23:57:12 o kernel: ACPI: PCI interrupt 0000:00:11.1[A]: no GSI -
    using IRQ 0
    Aug 8 23:56:24 o pam_console.dev[3001]: Restoring console permissions
    for /dev/nvidia0
    Aug 8 23:57:12 o kernel: VP_IDE: chipset revision 6
    Aug 8 23:56:24 o pam_console.dev[3057]: Restoring console permissions
    for /dev/snd/timer
    Aug 8 23:57:12 o kernel: VP_IDE: not 100%% native mode: will probe irqs
    later
    ug 8 23:56:24 o pam_console.dev[3049]: Restoring console permissions
    for /dev/agpgart
    Aug 8 23:57:12 o kernel: VP_IDE: VIA vt8233a (rev 00) IDE UDMA133
    controller on pci0000:00:11.1
    Aug 8 23:56:24 o pam_console.dev[3118]: Restoring console permissions
    for /dev/audio1
    Aug 8 23:57:12 o kernel: ide0: BM-DMA at 0xa800-0xa807, BIOS
    settings: hda:DMA, hdb:DMA
    Aug 8 23:56:24 o pam_console.dev[3106]: Restoring console permissions
    for /dev/audio
    Aug 8 23:57:12 o kernel: ide1: BM-DMA at 0xa808-0xa80f, BIOS
    settings: hdc:DMA, hdd:pio
    Aug 8 23:56:24 o pam_console.dev[3088]: Restoring console permissions
    for /dev/midi2
    Aug 8 23:57:12 o kernel: Probing IDE interface ide0...
    Aug 8 23:56:24 o pam_console.dev[3084]: Restoring console permissions
    for /dev/dmmidi2
    Aug 8 23:57:12 o kernel: hda: Maxtor 33073U4, ATA DISK drive
    Aug 8 23:56:24 o pam_console.dev[3080]: Restoring console permissions
    for /dev/adsp2
    Aug 8 23:57:12 o kernel: hdb: MAXTOR 6L060J3, ATA DISK drive
    Aug 8 23:56:24 o pam_console.dev[3060]: Restoring console permissions
    for /dev/snd/hwC2D0
    Aug 8 23:57:12 o kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Aug 8 23:56:24 o keytable: Ładowanie mapy klawiatury: pl succeeded
    Aug 8 23:57:12 o kernel: Probing IDE interface ide1...
    Aug 8 23:57:12 o oidentd: Uruchamianie oidentd succeeded
    Aug 8 23:56:25 o loadkeys:
    Loading /usr/lib/kbd/keymaps/include/compose.latin2.inc.gz
    Aug 8 23:57:12 o kernel: hdc: CD-RW BCE4816IM, ATAPI CD/DVD-ROM drive
    Aug 8 23:56:25 o keytable: Ładowanie klawiszy kompozycji:
    compose.latin2.inc succeeded
    Aug 8 23:57:12 o kernel: ide1 at 0x170-0x177,0x376 on irq 15
    Aug 8 23:56:26 o keytable: succeeded
    Aug 8 23:57:12 o kernel: hda: max request size: 128KiB
    Aug 8 23:56:28 o rc.sysinit: Uaktywnianie przestrzeni wymiany:
    succeeded
    Aug 8 23:57:12 o kernel: hda: 60030432 sectors (30735 MB) w/512KiB
    Cache, CHS=59554/16/63, UDMA(100)
    Aug 8 23:56:29 o rc.sysinit: Inicjalizacja kontrolera firewire
    (ohci1394): succeeded
    Aug 8 23:57:12 o kernel: hda: cache flushes not supported
    Aug 8 23:56:29 o ieee1394.agent[3794]: ... no drivers for IEEE1394
    product 0x/0x/0x
    Aug 8 23:57:12 o kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5
    >
    Aug 8 23:56:30 o ieee1394.agent[3958]: ... no drivers for IEEE1394
    product 0x/0x/0x
    Aug 8 23:57:13 o kernel: hdb: max request size: 128KiB
    Aug 8 23:56:30 o ieee1394.agent[3972]: ... no drivers for IEEE1394
    product 0x/0x/0x
    Aug 8 23:57:13 o kernel: hdb: 117266688 sectors (60040 MB) w/1819KiB
    Cache, CHS=65535/16/63, UDMA(133)
    Aug 8 23:56:31 o mandrake_everytime: Uruchamianie netprofile: succeeded
    Aug 8 23:57:13 o kernel: hdb: cache flushes supported
    Aug 8 23:56:31 o init: Entering runlevel: 3
    Aug 8 23:57:13 o kernel: /dev/ide/host0/bus0/target1/lun0: p1
    Aug 8 23:56:34 o INIT: Loading ACPI module ac: successfull
    Aug 8 23:57:13 o kernel: mice: PS/2 mouse device common for all mice
    Aug 8 23:56:34 o INIT: Loading ACPI module battery: successfull
    Aug 8 23:57:13 o kernel: input: AT Translated Set 2 keyboard on
    isa0060/serio0
    Aug 8 23:56:34 o INIT: Loading ACPI module button: successfull
    Aug 8 23:57:13 o kernel: input: PS/2 Generic Mouse on isa0060/serio1
    Aug 8 23:56:35 o INIT: Loading ACPI module container: successfull
    Aug 8 23:57:13 o kernel: md: md driver 0.90.1 MAX_MD_DEVS=256,
    MD_SB_DISKS=27
    Aug 8 23:56:35 o INIT: Loading ACPI module fan: successfull
    Aug 8 23:57:13 o kernel: NET: Registered protocol family 2
    Aug 8 23:56:35 o INIT: Loading ACPI module processor: successfull
    Aug 8 23:57:13 o kernel: IP: routing cache hash table of 16384 buckets,
    128Kbytes
    Aug 8 23:56:35 o INIT: Loading ACPI module tc1100-wmi: successfull
    Aug 8 23:57:13 o kernel: TCP established hash table entries: 262144
    (order: 9, 2097152 bytes)
    Aug 8 23:56:35 o INIT: Loading ACPI module thermal: successfull
    Aug 8 23:57:13 o kernel: TCP bind hash table entries: 65536 (order: 6,
    262144 bytes)
    Aug 8 23:56:35 o INIT: Loading ACPI module video: successfull
    Aug 8 23:57:13 o kernel: TCP: Hash tables configured (established
    262144 bind 65536)
    Aug 8 23:56:40 o rc: Uruchamianie dkms: succeeded
    Aug 8 23:57:13 o kernel: NET: Registered protocol family 1
    Aug 8 23:56:46 o sensord: sensord started
    Aug 8 23:57:13 o kernel: ACPI wakeup devices:
    Aug 8 23:56:46 o sensord: Chip: asb100-i2c-1-2d
    Aug 8 23:57:13 o kernel: PCI0 PCI1 UAR1 USB0 USB1
    Aug 8 23:56:46 o sensord: Adapter: SMBus Via Pro adapter at e800
    Aug 8 23:57:13 o kernel: ACPI: (supports S0 S1 S4 S5)
    Aug 8 23:56:46 o sensord: Algorithm: Unavailable from sysfs
    Aug 8 23:57:13 o kernel: BIOS EDD facility v0.16 2004-Jun-25, 2 devices
    found
    Aug 8 23:56:46 o lm_sensors: Uruchamianie sensord succeeded
    Aug 8 23:57:13 o kernel: devfs_mk_dev: could not append to parent for
    md/0
    Aug 8 23:56:46 o sensord: VCore 1: +1.84 V (min = +1.71 V, max =
    +1.89 V)
    Aug 8 23:57:13 o kernel: md: Autodetecting RAID arrays.
    Aug 8 23:56:46 o sensord: +3.3V: +3.33 V (min = +3.14 V, max = +3.47
    V)
    Aug 8 23:57:13 o kernel: md: autorun ...
    Aug 8 23:56:46 o sensord: +5V: +5.00 V (min = +4.76 V, max = +5.24 V)
    Aug 8 23:57:14 o kernel: md: ... autorun DONE.
    Aug 8 23:56:46 o sensord: +12V: +12.65 V (min = +10.82 V, max =
    +13.19 V)
    Aug 8 23:57:14 o kernel: EXT3-fs: INFO: recovery required on readonly
    filesystem.
    Aug 8 23:56:46 o sensord: -12V (reserved): -13.15 V (min = -0.00 V,
    max = -0.00 V)
    Aug 8 23:57:14 o kernel: EXT3-fs: write access will be enabled during
    recovery.
    Aug 8 23:56:46 o sensord: -5V (reserved): -5.52 V (min = -0.00 V, max
    = -0.00 V)
    Aug 8 23:57:14 o kernel: kjournald starting. Commit interval 5 seconds
    Aug 8 23:56:46 o sensord: CPU Fan: 2033 RPM (min = 664 RPM, div = -0)
    Aug 8 23:57:14 o kernel: EXT3-fs: hda1: orphan cleanup on readonly fs
    Aug 8 23:56:46 o sensord: Power Fan: 1288 RPM (min = 664 RPM, div =
    -0)
    Aug 8 23:57:14 o kernel: ext3_orphan_cleanup: deleting unreferenced
    inode 3467492
    Aug 8 23:56:46 o sensord: Chassic Fan: 1562 RPM (min = 664 RPM, div =
    -0)
    Aug 8 23:57:14 o kernel: ext3_orphan_cleanup: deleting unreferenced
    inode 2142121
    Aug 8 23:56:46 o sensord: M/B Temp: 44.0 C (limit = 40 C, hysteresis
    = 45 C)
    Aug 8 23:57:14 o kernel: EXT3-fs: hda1: 2 orphan inodes deleted
    Aug 8 23:56:46 o sensord: CPU Temp (Intel): 69.5 C (limit = 50 C,
    hysteresis = 60 C)
    Aug 8 23:57:14 o kernel: EXT3-fs: recovery complete.
    Aug 8 23:56:46 o sensord: Power Temp: 38.0 C (limit = 40 C,
    hysteresis = 45 C)
    Aug 8 23:57:14 o kernel: EXT3-fs: mounted filesystem with ordered data
    mode.
    Aug 8 23:56:46 o sensord: CPU Temp (AMD): 60.0 C (limit = 50 C,
    hysteresis = 60 C)
    Aug 8 23:57:14 o kernel: VFS: Mounted root (ext3 filesystem) readonly.
    Aug 8 23:56:46 o sensord: Chip: LG PAL_BG-i2c-0-61
    Aug 8 23:57:14 o kernel: Mounted devfs on /dev
    Aug 8 23:56:46 o sensord: Adapter: bt878 #0 [sw]
    Aug 8 23:57:14 o kernel: Freeing unused kernel memory: 268k freed
    Aug 8 23:56:46 o sensord: Algorithm: Unavailable from sysfs
    Aug 8 23:57:14 o kernel: ACPI: Power Button (FF) [PWRF]
    Aug 8 23:56:48 o network: Konfiguracja parametrów sieciowych:
    succeeded
    Aug 8 23:57:15 o kernel: ibm_acpi: ec object not found
    Aug 8 23:56:49 o postfix/postfix-script: fatal: the Postfix mail system
    is not running
    Aug 8 23:57:15 o postfix/postfix-script: starting the Postfix mail
    system
    Aug 8 23:57:15 o kernel: usbcore: registered new driver usbfs
    Aug 8 23:56:49 o network: Podnoszenie interfejsu lokalnego: succeeded
    Aug 8 23:57:15 o postfix: succeeded
    Aug 8 23:57:15 o postfix/master[6062]: daemon started -- version 2.1.5
    Aug 8 23:57:15 o kernel: usbcore: registered new driver hub
    Aug 8 23:56:52 o postfix/postfix-script: fatal: the Postfix mail system
    is not running
    Aug 8 23:57:15 o kernel: [eagle-usb] driver V2.2.0 loaded
    Aug 8 23:56:52 o network: Inicjowanie interfejsu eth0: succeeded
    Aug 8 23:57:16 o kernel: usbcore: registered new driver eagle-usb
    Aug 8 23:56:54 o postfix/postfix-script: fatal: the Postfix mail system
    is not running
    Aug 8 23:57:16 o kernel: Linux video capture interface: v1.00
    Aug 8 23:56:54 o network: Inicjowanie interfejsu eth1: succeeded
    Aug 8 23:57:16 o kernel: pwc Philips webcam module version
    10.0.6-unofficial loaded.
    Aug 8 23:56:54 o ifplugd(eth2)[5369]: ifplugd 0.26 initializing.
    Aug 8 23:57:16 o kernel: pwc Supports Philips PCA645/646,
    PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
    Aug 8 23:56:54 o ifplugd(eth2)[5369]: Using interface
    eth2/00:E0:18:00:00:04 with driver <eth1394> (version: $Rev: 1224 $)

    Aug 8 23:57:16 o kernel: pwc Also supports the Askey VC010, various
    Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
    Aug 8 23:56:54 o ifplugd(eth2)[5369]: Using detection mode: IFF_RUNNING
    Aug 8 23:57:16 o kernel: pwc the Creative WebCam 5 & Pro Ex, SOTEC
    Afina Eye and Visionite VCS-UC300 and VCS-UM100.
    Aug 8 23:56:54 o ifplugd(eth2)[5369]: Initialization complete, link
    beat detected.
    Aug 8 23:57:16 o kernel: pwc Default framerate set to 5.
    Aug 8 23:56:54 o ifplugd(eth2)[5369]: Executing
    '/etc/ifplugd/ifplugd.action eth2 up'.
    Aug 8 23:57:16 o kernel: pwc Default image size set to vga [640x480].
    Aug 8 23:56:54 o dhclient: eth2: unknown hardware address type 24
    Aug 8 23:57:17 o kernel: pwc Trace options: 0x00a1
    Aug 8 23:56:55 o network: Inicjowanie interfejsu eth2: succeeded
    Aug 8 23:57:17 o kernel: pwc Preferred compression set to 1.
    Aug 8 23:57:17 o httpd: Uruchamianie httpd succeeded
    Aug 8 23:57:17 o kernel: usbcore: registered new driver Philips webcam
    Aug 8 23:57:18 o rc: Uruchamianie kheader: succeeded
    Aug 8 23:57:18 o kernel: USB Universal Host Controller Interface driver
    v2.2
    Aug 8 23:57:19 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
    67 interval 11
    Aug 8 23:57:19 o kernel: ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 19
    (level, low) -> IRQ 19
    Aug 8 23:57:19 o devfsd[1032]: Caught SIGHUP
    Aug 8 23:57:19 o devfsd: Uruchamianie czynności devfsd: succeeded
    Aug 8 23:57:19 o kernel: uhci_hcd 0000:00:09.0: UHCI Host Controller
    Aug 8 23:57:19 o devfsd[1032]: read config file:
    "/etc/devfs/conf.d//mouse.conf"
    Aug 8 23:57:21 o kernel: uhci_hcd 0000:00:09.0: irq 19, io base 0xd800
    Aug 8 23:57:22 o devfsd[1032]: read config file:
    "/etc/devfs/conf.d//dynamic.conf"
    Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:09.0: new USB bus registered,
    assigned bus number 1
    Aug 8 23:57:22 o devfsd[1032]: read config file:
    "/etc/devfs/conf.d//rfcomm.conf"
    Aug 8 23:57:22 o kernel: hub 1-0:1.0: USB hub found
    Aug 8 23:57:22 o devfsd[1032]: read config file:
    "/etc/devfs/conf.d//mk712.conf"
    Aug 8 23:57:22 o kernel: hub 1-0:1.0: 2 ports detected
    Aug 8 23:57:22 o devfsd[1032]: read config file: "/etc/devfsd.conf"
    Aug 8 23:57:22 o kernel: ACPI: PCI interrupt 0000:00:09.1[B] -> GSI 16
    (level, low) -> IRQ 16
    Aug 8 23:57:22 o devfsd[6285]: error execing:
    "/etc/dynamic/scripts/part.script"^INo such file or directory
    Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:09.1: UHCI Host Controller
    Aug 8 23:57:22 o devfsd[6286]: error execing:
    "/etc/dynamic/scripts/part.script"^INo such file or directory
    Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:09.1: irq 16, io base 0xd400
    Aug 8 23:57:22 o devfsd[6287]: error execing:
    "/etc/dynamic/scripts/part.script"^INo such file or directory
    Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:09.1: new USB bus registered,
    assigned bus number 2
    Aug 8 23:57:22 o devfsd[6289]: error execing:
    "/etc/dynamic/scripts/part.script"^INo such file or directory
    Aug 8 23:57:22 o kernel: hub 2-0:1.0: USB hub found
    Aug 8 23:57:22 o kernel: hub 2-0:1.0: 2 ports detected
    Aug 8 23:57:22 o kernel: ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 21
    (level, low) -> IRQ 21
    Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.2: UHCI Host Controller
    Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.2: irq 21, io base 0xa400
    Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.2: new USB bus registered,
    assigned bus number 3
    Aug 8 23:57:22 o kernel: hub 3-0:1.0: USB hub found
    Aug 8 23:57:22 o kernel: hub 3-0:1.0: 2 ports detected
    Aug 8 23:57:22 o kernel: ACPI: PCI interrupt 0000:00:11.3[D] -> GSI 21
    (level, low) -> IRQ 21
    Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.3: UHCI Host Controller
    Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.3: irq 21, io base 0xa000
    Aug 8 23:57:22 o kernel: uhci_hcd 0000:00:11.3: new USB bus registered,
    assigned bus number 4
    Aug 8 23:57:22 o kernel: hub 4-0:1.0: USB hub found
    Aug 8 23:57:23 o kernel: hub 4-0:1.0: 2 ports detected
    Aug 8 23:57:23 o kernel: usb 4-1: new full speed USB device using
    uhci_hcd and address 2
    Aug 8 23:57:23 o kernel: [eagle-usb] New USB ADSL device detected,
    waiting for DSP code...
    Aug 8 23:57:23 o kernel: [eagle-usb] Interface 0 accepted.
    Aug 8 23:57:23 o kernel: [eagle-usb] created proc entry
    at : /proc/driver/eagle-usb/004-002
    Aug 8 23:57:23 o kernel: ACPI: PCI interrupt 0000:00:09.2[C] -> GSI 17
    (level, low) -> IRQ 17
    Aug 8 23:57:23 o kernel: ehci_hcd 0000:00:09.2: EHCI Host Controller
    Aug 8 23:57:23 o kernel: ehci_hcd 0000:00:09.2: irq 17, pci mem
    0xe9800000
    Aug 8 23:57:23 o kernel: ehci_hcd 0000:00:09.2: new USB bus registered,
    assigned bus number 5
    Aug 8 23:57:23 o kernel: ehci_hcd 0000:00:09.2: USB 2.0 initialized,
    EHCI 0.95, driver 10 Dec 2004
    Aug 8 23:57:23 o kernel: hub 5-0:1.0: USB hub found
    Aug 8 23:57:23 o kernel: hub 5-0:1.0: 4 ports detected
    Aug 8 23:57:23 o kernel: usb 1-1: new full speed USB device using
    uhci_hcd and address 2
    Aug 8 23:57:23 o kernel: pwc Philips PCVC740K (ToUCam Pro)/PCVC840
    (ToUCam II) USB webcam detected.
    Aug 8 23:57:23 o kernel: pwc Registered as /dev/video5.
    Aug 8 23:57:23 o kernel: usb 1-2: new full speed USB device using
    uhci_hcd and address 3
    Aug 8 23:57:23 o kernel: hub 1-2:1.0: USB hub found
    Aug 8 23:57:23 o kernel: hub 1-2:1.0: 4 ports detected
    Aug 8 23:57:23 o kernel: usb 1-2.3: new full speed USB device using
    uhci_hcd and address 4
    Aug 8 23:57:23 o kernel: pwc Philips PCVC740K (ToUCam Pro)/PCVC840
    (ToUCam II) USB webcam detected.
    Aug 8 23:57:23 o kernel: pwc Registered as /dev/video9.
    Aug 8 23:57:23 o kernel: usb 1-2.3: 400mA over 100mA budget!
    Aug 8 23:57:23 o kernel: hub 1-2:1.0: 100mA over power budget!
    Aug 8 23:57:23 o kernel: usbcore: deregistering driver eagle-usb
    Aug 8 23:57:23 o kernel: [eagle-usb] ADSL device removed
    Aug 8 23:57:23 o kernel: [eagle-usb] driver unloaded
    Aug 8 23:57:23 o kernel: snd: Unknown symbol unregister_sound_special
    Aug 8 23:57:23 o kernel: snd: Unknown symbol register_sound_special
    Aug 8 23:57:23 o kernel: snd: Unknown symbol sound_class
    Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol
    snd_info_register
    Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol
    snd_info_create_module_entry
    Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol
    snd_info_free_entry
    Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol snd_seq_root
    Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol snd_iprintf
    Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol snd_device_new
    Aug 8 23:57:23 o kernel: snd-seq-device: Unknown symbol
    snd_info_unregister
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_info_register
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_seq_device_new
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
    snd_info_free_entry
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
    snd_unregister_oss_device
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
    snd_register_oss_device
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
    snd_ctl_register_ioctl
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_card_file_add
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_iprintf
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
    snd_oss_info_register
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
    snd_unregister_device
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_device_new
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
    snd_ctl_unregister_ioctl
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
    snd_info_create_card_entry
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol snd_device_free
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
    snd_card_file_remove
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
    snd_info_unregister
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
    snd_device_register
    Aug 8 23:57:23 o kernel: snd-rawmidi: Unknown symbol
    snd_register_device
    Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
    snd_rawmidi_receive
    Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
    snd_rawmidi_transmit_empty
    Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
    snd_rawmidi_transmit
    Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
    snd_rawmidi_transmit_ack
    Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
    snd_rawmidi_transmit_peek
    Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol snd_rawmidi_new
    Aug 8 23:57:23 o kernel: snd-usb-lib: Unknown symbol
    snd_rawmidi_set_ops
    Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol snd_info_register
    Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol
    snd_info_create_module_entry
    Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol snd_info_free_entry
    Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol snd_iprintf
    Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol snd_ecards_limit
    Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol
    snd_oss_info_register
    Aug 8 23:57:23 o kernel: snd-timer: Unknown symbol
    snd_unregister_device
    Aug 8 23:57:24 o kernel: snd-timer: Unknown symbol snd_device_new
    Aug 8 23:57:24 o kernel: snd-timer: Unknown symbol snd_kmalloc_strdup
    Aug 8 23:57:24 o kernel: snd-timer: Unknown symbol snd_info_unregister
    Aug 8 23:57:24 o kernel: snd-timer: Unknown symbol snd_register_device
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_info_register
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol
    snd_info_create_module_entry
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_timer_notify
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_timer_interrupt
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_info_free_entry
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_info_get_str
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_ctl_register_ioctl
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_card_file_add
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_iprintf
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_major
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_unregister_device
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_timer_new
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_device_new
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol
    snd_ctl_unregister_ioctl
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol
    snd_info_create_card_entry
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_power_wait
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_device_free
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_card_file_remove
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_info_unregister
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_device_register
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_register_device
    Aug 8 23:57:24 o kernel: snd-pcm: Unknown symbol snd_info_get_line
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_ctl_add
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_pcm_new
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_card_register
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_card_free
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_card_proc_new
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_usb_create_midi_interface
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_pcm_stop
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_pcm_hw_constraint_minmax
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_pcm_format_physical_width
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_ctl_free_one
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_ctl_find_id
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_ctl_new1
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_component_add
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_pcm_hw_rule_add
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_card_new
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_iprintf
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_pcm_lib_malloc_pages
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_pcm_lib_ioctl
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_pcm_lib_free_pages
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_pcm_new_stream
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_pcm_set_ops
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol snd_device_new
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_card_disconnect
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_pcm_lib_preallocate_pages
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_card_free_in_thread
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_pcm_lib_preallocate_free_for_all
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_pcm_period_elapsed
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_pcm_format_name
    Aug 8 23:57:24 o kernel: snd-usb-audio: Unknown symbol
    snd_usbmidi_disconnect
    Aug 8 23:57:24 o kernel: usbcore: registered new driver snd-usb-audio
    Aug 8 23:57:24 o kernel: usbcore: registered new driver usblp
    Aug 8 23:57:24 o kernel: drivers/usb/class/usblp.c: v0.13: USB Printer
    Device Class driver
    Aug 8 23:57:24 o kernel: EXT3 FS on hda1, internal journal
    Aug 8 23:57:24 o kernel: ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 18
    (level, low) -> IRQ 18
    Aug 8 23:57:24 o kernel: Adding 2064312k swap on /dev/hda5.
    Priority:-1 extents:1
    Aug 8 23:57:24 o kernel: Linux agpgart interface v0.100 (c) Dave Jones
    Aug 8 23:57:24 o kernel: nvidia: module license 'NVIDIA' taints kernel.
    Aug 8 23:57:24 o kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16
    (level, low) -> IRQ 16
    Aug 8 23:57:24 o kernel: NVRM: loading NVIDIA Linux x86 NVIDIA Kernel
    Module 1.0-7174 Tue Mar 22 06:44:39 PST 2005
    Aug 8 23:57:24 o kernel: bttv: driver version 0.9.15 loaded
    Aug 8 23:57:24 o kernel: bttv: using 8 buffers with 2080k (520 pages)
    each for capture
    Aug 8 23:57:24 o kernel: bttv: Bt8xx card found (0).
    Aug 8 23:57:24 o kernel: ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 16
    (level, low) -> IRQ 16
    Aug 8 23:57:24 o kernel: bttv0: Bt878 (rev 17) at 0000:00:0d.0, irq:
    16, latency: 32, mmio: 0xed000000
    Aug 8 23:57:24 o kernel: bttv0: using: Prolink Pixelview PV-BT878P+9B
    (PlayTV Pro rev.9B FM+NICAM) [card=72,insmod option]
    Aug 8 23:57:24 o kernel: bttv0: gpio: en=00000000, out=00000000
    in=00ffc0ff [init]
    Aug 8 23:57:24 o kernel: bttv0: using tuner=28
    Aug 8 23:57:24 o kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not
    found
    Aug 8 23:57:24 o kernel: tvaudio: TV audio decoder + audio/video mux
    driver
    Aug 8 23:57:24 o kernel: tvaudio: known chips:
    tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425
    ,pic16c54 (PV951),ta8874z
    Aug 8 23:57:24 o kernel: bttv0: i2c: checking for TDA9887 @ 0x86... not
    found
    Aug 8 23:57:25 o kernel: tuner 0-0061: chip found @ 0xc2 (bt878 #0
    [sw])
    Aug 8 23:57:25 o kernel: tuner 0-0061: type set to 28 (LG PAL_BG+FM
    (TPI8PSB01D))
    Aug 8 23:57:25 o kernel: bttv0: registered device video2
    Aug 8 23:57:25 o kernel: bttv0: registered device vbi0
    Aug 8 23:57:25 o kernel: bttv0: registered device radio0
    Aug 8 23:57:25 o kernel: bttv0: PLL: 28636363 => 35468950 .. ok
    Aug 8 23:57:25 o kernel: bttv0: add subdevice "remote0"
    Aug 8 23:57:25 o kernel: bt878: AUDIO driver version 0.0.0 loaded
    Aug 8 23:57:25 o kernel: bt878: Bt878 AUDIO function found (0).
    Aug 8 23:57:25 o kernel: ACPI: PCI interrupt 0000:00:0d.1[A] -> GSI 16
    (level, low) -> IRQ 16
    Aug 8 23:57:25 o kernel: bt878(0): Bt878 (rev 17) at 00:0d.1, irq: 16,
    latency: 32, memory: 0xec800000
    Aug 8 23:57:25 o kernel: agpgart: Detected VIA KT266/KY266x/KT333
    chipset
    Aug 8 23:57:25 o kernel: agpgart: Maximum main memory to use for agp
    memory: 1185M
    Aug 8 23:57:25 o kernel: agpgart: AGP aperture is 128M @ 0xf0000000
    Aug 8 23:57:25 o kernel: kjournald starting. Commit interval 5 seconds
    Aug 8 23:57:25 o kernel: EXT3 FS on hdb1, internal journal
    Aug 8 23:57:25 o kernel: EXT3-fs: mounted filesystem with ordered data
    mode.
    Aug 8 23:57:25 o kernel: loop: loaded (max 8 devices)
    Aug 8 23:57:25 o kernel: SCSI subsystem initialized
    Aug 8 23:57:25 o kernel: st: Version 20041025, fixed bufsize 32768, s/g
    segs 256
    Aug 8 23:57:25 o kernel: ieee1394: Initialized config rom entry
    `ip1394'
    Aug 8 23:57:25 o kernel: ohci1394: $Rev: 1223 $ Ben Collins
    <bcollins@debian.org>
    Aug 8 23:57:25 o kernel: ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 17
    (level, low) -> IRQ 17
    Aug 8 23:57:25 o kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI):
    IRQ=[17] MMIO=[ea800000-ea8007ff] Max Packet=[2048]
    Aug 8 23:57:25 o kernel: hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB
    Cache, UDMA(33)
    Aug 8 23:57:25 o kernel: Uniform CD-ROM driver Revision: 3.20
    Aug 8 23:57:26 o kernel: 8139too Fast Ethernet driver 0.9.27
    Aug 8 23:57:26 o kernel: ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 17
    (level, low) -> IRQ 17
    Aug 8 23:57:26 o kernel: eth0: RealTek RTL8139 at 0xf8c40000,
    00:e0:4c:08:ae:17, IRQ 17
    Aug 8 23:57:26 o kernel: eth0: Identified 8139 chip type
    'RTL-8100B/8139D'
    Aug 8 23:57:26 o kernel: ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 19
    (level, low) -> IRQ 19
    Aug 8 23:57:26 o kernel: eth1: RealTek RTL8139 at 0xf8c42000,
    00:50:fc:c7:eb:2b, IRQ 19
    Aug 8 23:57:26 o kernel: eth1: Identified 8139 chip type
    'RTL-8100B/8139D'
    Aug 8 23:57:26 o kernel: ide-floppy driver 0.99.newide
    Aug 8 23:57:26 o kernel: eth1394: $Rev: 1224 $ Ben Collins
    <bcollins@debian.org>
    Aug 8 23:57:26 o kernel: eth1394: eth2: IEEE-1394 IPv4 over 1394
    Ethernet (fw-host0)
    Aug 8 23:57:26 o kernel: ieee1394: Host added: ID:BUS[0-00:1023]
    GUID[00e018000004199b]
    Aug 8 23:57:26 o kernel: ip_conntrack version 2.1 (8192 buckets, 65536
    max) - 248 bytes per conntrack
    Aug 8 23:57:26 o kernel: ip_tables: (C) 2000-2002 Netfilter core team
    Aug 8 23:57:26 o kernel: Floppy drive(s): fd0 is 1.44M
    Aug 8 23:57:26 o kernel: FDC 0 is a post-1991 82077
    Aug 8 23:57:26 o kernel: NET: Registered protocol family 23
    Aug 8 23:57:26 o kernel: IrCOMM protocol (Dag Brattli)
    Aug 8 23:57:26 o kernel: [eagle-usb] driver V2.2.0 loaded
    Aug 8 23:57:26 o kernel: [eagle-usb] New USB ADSL device detected,
    waiting for DSP code...
    Aug 8 23:57:26 o kernel: [eagle-usb] Interface 0 accepted.
    Aug 8 23:57:26 o kernel: [eagle-usb] created proc entry
    at : /proc/driver/eagle-usb/004-002
    Aug 8 23:57:26 o kernel: usbcore: registered new driver eagle-usb
    Aug 8 23:57:26 o kernel: eth0: link down
    Aug 8 23:57:26 o kernel: eth0: link down
    Aug 8 23:57:26 o kernel: NET: Registered protocol family 17
    Aug 8 23:57:26 o kernel: eth0: link down
    Aug 8 23:57:26 o kernel: eth1: link up, 100Mbps, full-duplex, lpa
    0x41E1
    Aug 8 23:57:26 o kernel: CSLIP: code copyright 1989 Regents of the
    University of California
    Aug 8 23:57:26 o kernel: PPP generic driver version 2.4.2
    Aug 8 23:57:26 o kernel: NET: Registered protocol family 10
    Aug 8 23:57:26 o kernel: Disabled Privacy Extensions on device
    c0416140(lo)
    Aug 8 23:57:26 o kernel: IPv6 over IPv4 tunneling driver
    Aug 8 23:57:26 o kernel: eth1: no IPv6 routers present
    Aug 8 23:57:26 o kernel: eth0: no IPv6 routers present
    Aug 8 23:57:26 o kernel: ip_tables: (C) 2000-2002 Netfilter core team
    Aug 8 23:57:26 o kernel: ip_conntrack version 2.1 (8192 buckets, 65536
    max) - 248 bytes per conntrack
    Aug 8 23:57:27 o kernel: ip6_tables: (C) 2000-2002 Netfilter core team
    Aug 8 23:57:27 o hal.hotplug[6694]: DEVPATH is not set

    Aug 8 23:57:27 o kernel: input: PC Speaker
    Aug 8 23:57:28 o kernel: cpu5wdt: init success
    Aug 8 23:57:29 o kernel: usbcore: deregistering driver snd-usb-audio
    Aug 8 23:57:30 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
    67 interval 12
    Aug 8 23:57:31 o devfsd[1032]: error copying: "/lib/dev-state/vcc/2" to
    "/dev/vcc/2"
    Aug 8 23:57:31 o devfsd[1032]: error copying: "/lib/dev-state/vcc/3" to
    "/dev/vcc/3"
    Aug 8 23:57:31 o devfsd[1032]: error copying: "/lib/dev-state/vcc/2" to
    "/dev/vcc/2"
    Aug 8 23:57:31 o devfsd[1032]: error copying: "/lib/dev-state/vcc/3" to
    "/dev/vcc/3"
    Aug 8 23:57:34 o kernel: ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 18
    (level, low) -> IRQ 18
    Aug 8 23:57:34 o alsa: succeeded
    Aug 8 23:57:35 o login(pam_unix)[6928]: session opened for user root by
    (uid=0)
    Aug 8 23:57:35 o -- root[6928]: ROOT LOGIN ON vc/1
    Aug 8 23:57:39 o kernel: usbcore: registered new driver snd-usb-audio
    Aug 8 23:57:40 o login(pam_unix)[6933]: session opened for user
    michalkr by (uid=0)
    Aug 8 23:57:41 o pam_console.dev[8235]: Restoring console permissions
    for /dev/mixer2
    Aug 8 23:57:42 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
    67 interval 15
    Aug 8 23:57:46 o pam_console.dev[8441]: Restoring console permissions
    for /dev/mixer
    Aug 8 23:57:46 o -- michalkr[6933]: LOGIN ON vc/6 BY michalkr
    Aug 8 23:57:46 o motion: Processing thread 0 - config
    file /usr/local/etc/motion.conf
    Aug 8 23:57:46 o motion: Unknown config option: "mpeg_encode"
    Aug 8 23:57:46 o motion: Unknown config option: "mpeg_encode_bin"
    Aug 8 23:57:46 o motion: Unknown config option: "adjust_rate"
    Aug 8 23:57:46 o motion: Unknown config option: "jpg_cleanup"
    Aug 8 23:57:46 o motion: Unknown config option:
    "berkeley_single_directory"
    Aug 8 23:57:46 o motion: Unknown config option: "predict_filename"
    Aug 8 23:57:46 o motion: Unknown config option: "sql_log_image"
    Aug 8 23:57:46 o motion: Unknown config option: "sql_log_snapshot"
    Aug 8 23:57:46 o motion: Unknown config option: "sql_log_mpeg"
    Aug 8 23:57:46 o motion: Unknown config option: "sql_log_timelapse"
    Aug 8 23:57:46 o motion: Unknown config option: "sql_log_prediction"
    Aug 8 23:57:46 o motion: Unknown config option: "pgsql_port"
    Aug 8 23:57:46 o motion: Unknown config option: "predict_enable"
    Aug 8 23:57:47 o motion: Unknown config option: "predict_threshold"
    Aug 8 23:57:47 o motion: motion running as daemon process
    Aug 8 23:57:47 o motion: waiting for threads to finish, pid: 8508
    Aug 8 23:57:47 o motion: Thread 0 PID: 8508
    Aug 8 23:57:47 o kernel: pwc Failed to set LED on/off time.
    Aug 8 23:57:47 o kernel: pwc set_video_mode(640x480 @ 5, palette 15).
    Aug 8 23:57:47 o kernel: pwc decode_size = 5.
    Aug 8 23:57:47 o kernel: pwc Using alternate setting 6.
    Aug 8 23:57:47 o kernel: [eagle-usb] ioctl EU_IO_CMVS received and
    treated.
    Aug 8 23:57:47 o kernel: [eagle-usb] ioctl EU_IO_OPTIONS received
    Aug 8 23:57:47 o kernel: [eagle-usb] ioctl EU_IO_DSP received
    Aug 8 23:57:47 o kernel: [eagle-usb] Loading DSP code to device...
    Aug 8 23:57:47 o kernel: [eagle-usb] DSP code successfully loaded to
    device
    Aug 8 23:57:48 o pam_console.dev[8541]: Restoring console permissions
    for /dev/vcs10
    Aug 8 23:57:48 o pam_console.dev[8547]: Restoring console permissions
    for /dev/vcsa10
    Aug 8 23:57:50 o kernel: pwc Dumping frame 6.
    Aug 8 23:57:50 o kernel: agpgart: Found an AGP 2.0 compliant device at
    0000:00:00.0.
    Aug 8 23:57:50 o kernel: agpgart: Putting AGP V2 device at 0000:00:00.0
    into 4x mode
    Aug 8 23:57:50 o kernel: agpgart: Putting AGP V2 device at 0000:01:00.0
    into 4x mode
    Aug 8 23:57:50 o kernel: pwc Dumping frame 7.
    Aug 8 23:57:50 o kernel: pwc Dumping frame 9.
    Aug 8 23:57:50 o kernel: agpgart: Found an AGP 2.0 compliant device at
    0000:00:00.0.
    Aug 8 23:57:50 o kernel: agpgart: Putting AGP V2 device at 0000:00:00.0
    into 4x mode
    Aug 8 23:57:50 o kernel: agpgart: Putting AGP V2 device at 0000:01:00.0
    into 4x mode
    Aug 8 23:57:51 o kernel: pwc Dumping frame 11.
    Aug 8 23:57:51 o kernel: pwc Dumping frame 13.
    Aug 8 23:57:52 o kernel: pwc Dumping frame 16.
    Aug 8 23:57:52 o kernel: pwc Dumping frame 18.
    Aug 8 23:57:53 o kernel: pwc Dumping frame 21.
    Aug 8 23:57:53 o kernel: pwc Dumping frame 23.
    Aug 8 23:57:54 o kernel: pwc Dumping frame 26.
    Aug 8 23:57:54 o kernel: pwc Dumping frame 28.
    Aug 8 23:57:54 o kernel: pwc Dumping frame 30.
    Aug 8 23:57:55 o kernel: pwc Dumping frame 33.
    Aug 8 23:57:55 o kernel: pwc Dumping frame 35.
    Aug 8 23:57:56 o kernel: pwc Dumping frame 38.
    Aug 8 23:57:56 o kernel: pwc Dumping frame 40.
    Aug 8 23:57:57 o dhclient: DHCPDISCOVER on eth2 to 255.255.255.255 port
    67 interval 2
    Aug 8 23:57:57 o kernel: pwc Dumping frame 42.
    Aug 8 23:57:57 o kernel: pwc Dumping frame 43.
    Aug 8 23:57:57 o kernel: pwc Dumping frame 44.
    Aug 8 23:57:58 o kernel: pwc Dumping frame 46 (last message).
    Aug 8 23:57:59 o dhclient: No DHCPOFFERS received.
    Aug 8 23:58:00 o kernel: zcip uses obsolete (PF_INET,SOCK_PACKET)
    Aug 8 23:58:00 o zcip[8577]: libnet_open_link_interface("eth2"):
    unknown physical layer type 0x18
    Aug 8 23:58:00 o ifplugd(eth2)[5369]: client: Determining IP
    information for eth2... failed.
    Aug 8 23:58:00 o ifplugd(eth2)[5369]: Program execution failed, return
    value is 1.
    Aug 8 23:58:00 o ifplugd(eth2)[5369]: Exiting.
    Aug 8 23:58:04 o kernel: [eagle-usb] Modem operational !!
    Aug 8 23:58:04 o kernel: [eagle-usb] Ethernet device eth3 created.
    Aug 8 23:58:06 o postfix/postfix-script: refreshing the Postfix mail
    system
    Aug 8 23:58:06 o postfix/master[6062]: reload configuration
    Aug 8 23:58:14 o kernel: eth3: no IPv6 routers present
    Aug 8 23:58:22 o pppd[8679]: pppd 2.4.3 started by root, uid 0
    Aug 8 23:58:22 o pppd[8679]: using channel 1
    Aug 8 23:58:22 o pppd[8679]: Using interface ppp0
    Aug 8 23:58:22 o pppd[8679]: Connect: ppp0 <--> /dev/pts/0
    Aug 8 23:58:23 o pppd[8679]: sent [LCP ConfReq id=0x1 <mru 1492> <magic
    0xbd1ae510>]
    Aug 8 23:58:25 o pppd[8679]: rcvd [LCP ConfReq id=0x3e <auth chap MD5>
    <magic 0x6d4ee261>]
    Aug 8 23:58:25 o pppd[8679]: sent [LCP ConfAck id=0x3e <auth chap MD5>
    <magic 0x6d4ee261>]
    Aug 8 23:58:26 o pppd[8679]: sent [LCP ConfReq id=0x1 <mru 1492> <magic
    0xbd1ae510>]
    Aug 8 23:58:26 o pppd[8679]: rcvd [LCP ConfAck id=0x1 <mru 1492> <magic
    0xbd1ae510>]
    Aug 8 23:58:26 o pppd[8679]: rcvd [CHAP Challenge id=0x8d
    <74092edeac109ef714f8f867905772a515274f12be>, name = "kat_ru1"]
    Aug 8 23:58:26 o pppd[8679]: sent [CHAP Response id=0x8d
    <0a44b75013fc6d851d1f081a27942425>, name = "CENZO@RED"
    ]
    Aug 8 23:58:27 o pppd[8679]: rcvd [CHAP Success id=0x8d ""]
    Aug 8 23:58:27 o pppd[8679]: CHAP authentication succeeded
    Aug 8 23:58:27 o pppd[8679]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>
    <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
    Aug 8 23:58:27 o pppd[8679]: rcvd [IPCP ConfNak id=0x1 <addr
    83.30.51.80> <ms-dns1 194.204.152.34> <ms-dns3 217.98.63.164>
    ]
    Aug 8 23:58:27 o pppd[8679]: sent [IPCP ConfReq id=0x2 <addr
    83.30.51.80> <ms-dns1 194.204.152.34> <ms-dns3 217.98.63.164>
    ]
    Aug 8 23:58:27 o pppd[8679]: rcvd [IPCP ConfReq id=0x2 <addr
    213.25.2.205>]
    Aug 8 23:58:27 o pppd[8679]: sent [IPCP ConfAck id=0x2 <addr
    213.25.2.205>]
    Aug 8 23:58:27 o pppd[8679]: rcvd [IPCP ConfAck id=0x2 <addr
    83.30.51.80> <ms-dns1 194.204.152.34> <ms-dns3 217.98.63.164>
    ]
    Aug 8 23:58:27 o pppd[8679]: local IP address 83.30.51.80
    Aug 8 23:58:27 o pppd[8679]: remote IP address 213.25.2.205
    Aug 8 23:58:27 o pppd[8679]: primary DNS address 194.204.152.34
    Aug 8 23:58:27 o pppd[8679]: secondary DNS address 217.98.63.164
    Aug 8 23:58:27 o pppd[8747]: Script /etc/ppp/ip-up started (pid 8749)
    Aug 8 23:58:27 o postfix/postfix-script: refreshing the Postfix mail
    system
    Aug 8 23:58:28 o postfix/master[6062]: reload configuration
    Aug 8 23:58:28 o crond[8796]: (CRON) STARTUP (fork ok)
    Aug 8 23:58:28 o crond: Uruchamianie crond succeeded
    Aug 8 23:58:28 o postfix/postfix-script: refreshing the Postfix mail
    system
    Aug 8 23:58:28 o postfix/master[6062]: reload configuration
    Aug 8 23:58:28 o pppd[8747]: Script /etc/ppp/ip-up finished (pid 8749),
    status = 0x0
    Aug 8 23:58:39 o kernel: tuner 0-0061: radio freq (0.00) out of range
    (65-108)

    Aug 8 23:59:00 o CROND[9091]:.................... that's all i think

    It is a kernel-source-2.6-2.6.11-12mdk.i586.rpm compiled by myself
    for "athlon/duron/k7" and NVIDIA-Linux-x86-1.0-7174-pkg1 compiled too
    by myself.

    Linux o 2.6.11-12mdkcustom #2 Sat Aug 6 11:02:20 CEST 2005 i686 AMD
    Duron(TM)unknown GNU/Linux

    Ps. i should compile 2.6.13-rc6, but ATM i have no time, so, i did quick
    fix
    #> rmmod bt878
    #> rmmod bttv
    #> rmmod btcx-risc
    and i'm waiting for crash.

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/


  • Next message: Bodo Eggert: "Re: Regression: radeonfb: No synchronisation on CRT with linux-2.6.13-rc5"

    Relevant Pages

    • PROBLEM: Dell Inspiron 1501 fails to boot in 2.6.21+
      ... My new laptop won't boot with kernel versions 2.6.21 or 2.6.22. ... I've also included my kernel configuration and ver_linux output. ... Enabling unmasked SIMD FPU exception support... ... usbcore: ...
      (Linux-Kernel)
    • Performance problems with 3ware 9500S-4LP and 2.6.25-rc3
      ... We tried the Cent-OS 2.6.18-based kernel, ... soon as data is written to the disks on the 3ware controller. ... # CPUFreq processor drivers ... # Core Netfilter Configuration ...
      (Linux-Kernel)
    • Lacie Mobile Disk 250 GB USB 2.0 not recognized by my computer
      ... i bought a "Lacie Mobile Disk 250 GB USB 2.0 HI-speed", but it seems not recognized by my computer. ... 00:10.0 USB Controller: VIA Technologies, ... Kernel driver in use: uhci_hcd ... # Enable WiMAX to see the WiMAX drivers ...
      (Linux-Kernel)
    • kernel oops with framebuffer device vt8623fb
      ... If I load the module vt8623fb i get a kernel oops, if the VIA 8623 display framebuffer driver is compiled direct into kernel the system hangs up very early at booting the kernel. ... 00:08.0 Ethernet controller: Realtek Semiconductor Co., ... 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller ... # Device Drivers ...
      (Linux-Kernel)
    • User-Experiences 2.6.0-test5[-mm2]: General, Power-Management and tmscsim
      ... 00:00.0 Host bridge: VIA Technologies, ... 00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev ... 00:11.2 USB Controller: VIA Technologies, ... Some general experiences while building and configuring the Kernel ...
      (Linux-Kernel)