thousands of "tulip_stop_rxtx() failed" errors

From: jerome lacoste (jerome.lacoste_at_gmail.com)
Date: 08/22/05

  • Next message: Chris Wright: "Re: [2.6 patch] SECURITY must depend on SYSFS" 
    Date:	Mon, 22 Aug 2005 17:29:22 +0200
To: Linux Kernel mailing list <linux-kernel@vger.kernel.org>

    Using kernel 2.6.11 on Mandriva LE 2005, I am seeing a lot of tulip
    errors in my logs:
       0000:02:09.0: tulip_stop_rxtx() failed

    It doesn't seem to impact the performance, although it fills up my logs.

    The card is connected to the ADSL modem. Any idea as to what could be
    causing this?
    Bad cable?

    The box is remote so I cannot do much with hardware right now.

    Cheers,

    Jerome

    > ifconfig eth0
    eth0 Lien encap:Ethernet HWaddr 00:80:AD:20:1D:66
              adr inet6: fe80::280:adff:fe20:1d66/64 Scope:Lien
              UP BROADCAST MULTICAST MTU:1500 Metric:1
              RX packets:242073 errors:4010 dropped:0 overruns:0 frame:0
              TX packets:231702 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 lg file transmission:1000
              RX bytes:71151194 (67.8 Mb) TX bytes:48721547 (46.4 Mb)
              Interruption:3 Adresse de base:0xd800

    > uname -a
    Linux localhost 2.6.11-12mdk-i586-up-1GB #1 Mon Jun 27 21:49:58 MDT
    2005 i686 Pentium III (Coppermine) unknown GNU/Linux

    > cat /proc/interrupts
               CPU0
      0: 9415381 XT-PIC timer
      1: 6557 XT-PIC i8042
      2: 0 XT-PIC cascade
      3: 602974 XT-PIC eth0
      8: 1 XT-PIC rtc
      9: 3727677 XT-PIC Ensoniq AudioPCI
     10: 66 XT-PIC uhci_hcd
     11: 790910 XT-PIC r128@pci:0000:01:00.0
     12: 482453 XT-PIC i8042
     14: 133760 XT-PIC ide0
     15: 11898 XT-PIC ide1
    NMI: 0
    LOC: 0
    ERR: 0
    MIS: 0

    > lspci
    00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge
    and Memory Controller Hub (rev 02)
    00:01.0 PCI bridge: Intel Corporation 82815 815 Chipset AGP Bridge (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 02)
    00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 02)
    00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 02)
    00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 02)
    00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 02)
    01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128
    PF/PRO AGP 4x TMDS
    02:09.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x
    DEC-Tulip compatible 10/100 Ethernet (rev 31)
    02:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
    Controller (rev 46)
    02:0c.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 09)

    02:09.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x
    DEC-Tulip compatible 10/100 Ethernet (rev 31)
     Subsystem: Unknown device 4554:434e
     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR+ FastB2B-
     Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
     Latency: 64 (5000ns min, 10000ns max)
     Interrupt: pin A routed to IRQ 3
     Region 0: I/O ports at d800 [size=256]
     Region 1: Memory at ff9ffc00 (32-bit, non-prefetchable) [size=256]
     Expansion ROM at ff980000 [disabled] [size=256K]
     Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    > mii-tool -v
    eth0: negotiated 100baseTx-FD, link ok
      product info: vendor 00:60:6e, model 4 rev 0
      basic mode: autonegotiation enabled
      basic status: autonegotiation complete, link ok
      capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
      advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
      link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  • Next message: Chris Wright: "Re: [2.6 patch] SECURITY must depend on SYSFS"

    Relevant Pages

    • Re: experiences beyond 4 GB RAM with 2.4.22
      ... Both network card and controller are 64 bit cards. ... Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Reg. Ethernet Controller Access Problem
      ... Ethernet Boot Loader Configuration: ... F) Format flash ... Rajesh Going to detect and initialize Ethernet controller first time. ... Inside SendFrame ...
      (microsoft.public.windowsce.platbuilder)
    • Reg. Ethernet Controller Access Problem
      ... Ethernet Boot Loader Configuration: ... F) Format flash ... Rajesh Going to detect and initialize Ethernet controller first time. ... Inside SendFrame ...
      (microsoft.public.windowsce.embedded)
    • Problem: network drops; ethernet driver problem? (IRQ 11 disabled)
      ... Problem: The network drops out with message: "irq 11: nobody cared! ... much ethernet traffic is happening on the machine) the network drops ... ParErr+ Stepping- SERR+ FastB2B- ... 00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev ...
      (Linux-Kernel)
    • Re: Welches Modul f. Dawicontrol DC-2975U
      ... LSI Logic / Symbios Logic LSI53C876/E PCI to Dual Channel SCSI Controller ... 02:04.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet ...
      (de.comp.os.unix.linux.hardware)