Re: Very strange Marvell/Yukon Gigabit NIC networking problems

From: Jesse Brandeburg (jesse.brandeburg_at_gmail.com)
Date: 08/30/05

  • Next message: Alan Cox: "Re: 2.6.13-rc7-rt4, fails to build" 
    Date:	Tue, 30 Aug 2005 13:18:57 -0700
To: Daniel Drake <dsd@gentoo.org>

    on 2.6.11/12 when it isn't working maybe you should send us the output
    of lspci -vvv

    just a hint, I'm guessing its power management related, and / or
    something to do with the pci bus code.

    On 8/30/05, Daniel Drake <dsd@gentoo.org> wrote:
    > Forwarding on, please reply-to-all in future.
    >
    > Steve Kieu wrote:
    > > Hi all,
    > >
    > > I have "fixed" the problem in a very wierd way.Reading
    > > your post I thought maybe when removing the driver
    > > itself it set some bit incorrectly. Then I decided to
    > > do:
    > >
    > > Boot with init=/bin/bash so bypass all other things.
    > > modprobe skge
    > >
    > > run ifconfig eth0 ip_num up
    > >
    > >
    > > ping a host
    > >
    > > then while pinging hit Ctrl+Alt+Del key to hot reboot
    > > the system.
    > >
    > > I still see the light at the hub lits. Now I boot to
    > > winXP and as I expected , it worked!
    > >
    > > No I boot 2.6.11 and it worked, so the problem resolve
    > > but I am tooooo scared to run 2613 now :-)
    > >
    > > Hope this information helps debuging the driver.
    > >
    > > Thanks.
    > >
    > > S.KIEU
    > -
    > To unsubscribe from this list: send the line "unsubscribe netdev" in
    > the body of a message to majordomo@vger.kernel.org
    > More majordomo info at http://vger.kernel.org/majordomo-info.html
    >
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  • Next message: Alan Cox: "Re: 2.6.13-rc7-rt4, fails to build"

    Relevant Pages

    • Re: Very strange Marvell/Yukon Gigabit NIC networking problems
      ... > just a hint, I'm guessing its power management related, and / or ... the dmesg output with skge driver will show chip version and revision. ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: My thoughts on the "new development model"
      ... |>>> 2.6 tree is great for gentoo users who like gcc consuming all CPU ... |>> that after a month or so of fixes etc it will be a very stable kernel ... driver for 2.6.7 for an ADSL card; a development driver for 2.6.5 for a ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: sata related hang with linux-2.6
      ... IMHO there's something not quite right with the Silicon Image libata ... Perhaps the driver is enabling the hardware to generate interrupts ... before setting up the interrupt routine for it? ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: SL811 problem on mach-pxa
      ... It was tested with _both_ workarounds for IRQ issues; ... unlike the predecessors to this driver). ... I've had reports that one of the ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: 2.7 (future kernel) wish
      ... > I've never seen one give a STOP error from that but I guess a bad driver ... I would like to see the HAL type crap for Linux. ... to have uniform user device control from a gui programmable means. ... To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ ...
      (Linux-Kernel)
    Loading