Re: The system works (2.6.14-rc2): functional k8n-dl

From: Sean Bruno (sean.bruno_at_dsl-only.net)
Date: 09/23/05

  • Next message: Nish Aravamudan: "Re: tty update speed regression (was: 2.6.14-rc2-mm1)" 
    To: karim@opersys.com
Date:	Fri, 23 Sep 2005 10:08:16 -0700

    On Thu, 2005-09-22 at 17:29 -0400, Karim Yaghmour wrote:
    > Nish,
    >
    > OK, I can confirm that with version 1006 of the BIOS it works flawlessly
    > with Linux. I was able to install full FC4 and boot without a problem
    > even with the SATA disk plugged to the nVidia controller (reading the
    > archives you will see that the nVidia SATA controller is something I
    > was simply unable to get working.) I didn't need to recompile anything.
    > The kernel that came with FC4 worked just fine.
    I can also confirm these findings. However, I still have to boot the
    kernel with iommu=memaper=3 in order to get the system to work
    properly.

    Sean

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  • Next message: Nish Aravamudan: "Re: tty update speed regression (was: 2.6.14-rc2-mm1)"

    Relevant Pages

    • Re: RFC: [2.6 patch] better i386 CPU selection
      ... If we boot a 386 kernel on a ppro with that bug, ... For the handful of bytes saved in the mtrr driver, ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • how to build a working 2.6 kernel with SATA
      ... I am trying to build a bootable 2.6 kernel for a Dell 8300, ... which has both the onboard ICH5 SATA controller and a PCI ... I have seen a variety of boot problems, ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Major 2.4 / 2.{5|6}-smp Scheduler Slow-ness
      ... Ok, first of all, I have never been able to run a 2.4 kernel on this ... much so that this is a scheduler issue. ... When i finally let the 2.6.0-test2-mm1 boot with smp support, ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: 2.6.12-rc3-mm1 doesnt boot
      ... > Comparing the point where booting stops with a boot from a working ... > kernel, the first line that isn't displayed is the line where init says ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • 2.6.28-rc2: REGRESSION in early boot
      ... I've opened a Kernel Bug to track this regression: ... Essentially, the system panics in early boot, resulting in multiple ... commit d6c88a507ef0b6afdb013cba4e7804ba7324d99a ... # Device Drivers ...
      (Linux-Kernel)