Kernal oops with drm radeon
From: Florian (florian.winterstein_at_gmail.com)
Date: 11/29/05
- Previous message: Roland Dreier: "Re: [2.6 patch] drivers/infiniband/core/mad.c: fix a NULL pointer dereference"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Tue, 29 Nov 2005 09:23:08 -0800 To: linux-kernel@vger.kernel.org
[1.] One line summary of the problem:
Trying to play a recording with mythtv creates a kernel oops (every time)
[2.] Full description of the problem/report:
see above
[3.] Keywords (i.e., modules, networking, kernel):
drm radeon mythtv
[4.] Kernel version (from /proc/version):
Linux version 2.6.14.2 (root@florian) (gcc version 3.3.6 (Debian
1:3.3.6-7)) #2 Wed Nov 23 09:46:25 PST 2005
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
Nov 29 08:58:33 florian kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00000004
Nov 29 08:58:33 florian kernel: printing eip:
Nov 29 08:58:33 florian kernel: c0129955
Nov 29 08:58:33 florian kernel: *pde = 00000000
Nov 29 08:58:33 florian kernel: Oops: 0002 [#3]
Nov 29 08:58:33 florian kernel: Modules linked in: bttv video_buf
v4l2_common btcx_risc lirc_i2c lirc_dev radeon drm ip_nat_ftp
ip_conntrack_ftp snd_pcm_oss snd_mixer_oss forcedeth tulip msp3400
saa7115 tda9887
wm8775 cx25840 firmware_class tuner tveeprom snd_intel8x0
snd_ac97_codec snd_ac97_bus ivtv snd_pcm i2c_algo_bit i2c_nforce2
snd_timer snd videodev i2c_core soundcore snd_page_alloc nvidia_agp
agpgart
Nov 29 08:58:33 florian kernel: CPU: 0
Nov 29 08:58:33 florian kernel: EIP: 0060:[add_wait_queue+21/48]
Not tainted VLI
Nov 29 08:58:33 florian kernel: EFLAGS: 00010046 (2.6.14.2)
Nov 29 08:58:33 florian kernel: EIP is at add_wait_queue+0x15/0x30
Nov 29 08:58:33 florian kernel: eax: dfd0d208 ebx: 00000000 ecx:
d756bebc edx: d756beb0
Nov 29 08:58:33 florian kernel: esi: 00000246 edi: d756bea4 ebp:
dfd0d000 esp: d756be6c
Nov 29 08:58:33 florian kernel: ds: 007b es: 007b ss: 0068
Nov 29 08:58:33 florian kernel: Process mythfrontend (pid: 5734,
threadinfo=d756a000 task=c63d15a0)
Nov 29 08:58:33 florian kernel: Stack: d756a000 00771005 e1a26f84
dfd0d000 dd6e8800 00000000 dfd0d208 00000000
Nov 29 08:58:33 florian kernel: dffef0c0 00000000 c63d15a0
c0113b20 00000000 00000000 00000013 00000006
Nov 29 08:58:33 florian kernel: dfd0d000 00000000 c63d15a0
c0113b20 00000000 00000000 b0a920d0 c01e668c
Nov 29 08:58:33 florian kernel: Call Trace:
Nov 29 08:58:33 florian kernel: [pg0+560476036/1069917184]
radeon_driver_vblank_wait+0xa4/0x150 [radeon]
Nov 29 08:58:33 florian kernel: [default_wake_function+0/32] default_wake_funct
ion+0x0/0x20
Nov 29 08:58:33 florian kernel: [default_wake_function+0/32]
default_wake_function+0x0/0x20
Nov 29 08:58:33 florian kernel: [copy_from_user+76/192]
copy_from_user+0x4c/0xc0
Nov 29 08:58:33 florian kernel: [pg0+551788680/1069917184]
drm_wait_vblank+0x1f8/0x210 [drm]
Nov 29 08:58:33 florian kernel: [chrdev_open+174/336] chrdev_open+0xae/0x150
Nov 29 08:58:33 florian kernel: [pg0+551782203/1069917184]
drm_ioctl+0xeb/0x1b4 [drm]
Nov 29 08:58:33 florian kernel: [convert_eip_to_linear+170/176]
convert_eip_to_linear+0xaa/0xb0
Nov 29 08:58:33 florian kernel: [convert_eip_to_linear+170/176]
convert_eip_to_linear+0xaa/0xb0
Nov 29 08:58:33 florian kernel: [do_ioctl+88/128] do_ioctl+0x58/0x80
Nov 29 08:58:33 florian kernel: [convert_eip_to_linear+170/176]
convert_eip_to_linear+0xaa/0xb0
Nov 29 08:58:33 florian kernel: [vfs_ioctl+101/464] vfs_ioctl+0x65/0x1d0
Nov 29 08:58:33 florian kernel: [convert_eip_to_linear+170/176]
convert_eip_to_linear+0xaa/0xb0
Nov 29 08:58:33 florian kernel: [sys_ioctl+69/128] sys_ioctl+0x45/0x80
Nov 29 08:58:33 florian kernel: [convert_eip_to_linear+170/176]
convert_eip_to_linear+0xaa/0xb0
Nov 29 08:58:33 florian kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Nov 29 08:58:33 florian kernel: [convert_eip_to_linear+170/176]
convert_eip_to_linear+0xaa/0xb0
Nov 29 08:58:33 florian kernel: Code: 90 90 90 90 90 90 90 90 90 90 90
90 90 90 90 90 90 90 90 90 90 90 83 ec 08 83 22 fe 89 1c 24 89 74 24
04 9c 5e fa 8b 18 8d 4a 0c <89> 4b 04 89 5a 0c 89 41 04 89 08 56 9d 8b
74 24 04 8b 1c 24 83
[6.] A small shell script or example program which triggers the
problem (if possible)
-
[7.] Environment
Debian testing
[7.1.] Software (add the output of the ver_linux script here)
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) XP 2400+
stepping : 1
cpu MHz : 2004.789
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 4015.44
[7.3.] Module information (from /proc/modules):
bttv 154576 0 - Live 0xe2281000
video_buf 17284 1 bttv, Live 0xe11e9000
v4l2_common 4736 1 bttv, Live 0xe11cc000
btcx_risc 3912 1 bttv, Live 0xe090d000
lirc_i2c 8452 1 - Live 0xe11c8000
lirc_dev 12644 1 lirc_i2c, Live 0xe11c3000
radeon 104000 4 - Live 0xe1a1c000
drm 64148 5 radeon, Live 0xe11d8000
ip_nat_ftp 2752 0 - Live 0xe0811000
ip_conntrack_ftp 6128 1 ip_nat_ftp, Live 0xe0904000
snd_pcm_oss 47456 0 - Live 0xe11b6000
snd_mixer_oss 16832 1 snd_pcm_oss, Live 0xe0959000
forcedeth 18880 0 - Live 0xe08da000
tulip 47456 0 - Live 0xe0971000
msp3400 26992 0 - Live 0xe0951000
saa7115 13328 0 - Live 0xe08ff000
tda9887 12432 0 - Live 0xe08fa000
wm8775 5340 0 - Live 0xe08d7000
cx25840 41172 0 - Live 0xe0945000
firmware_class 7936 2 bttv,cx25840, Live 0xe08d4000
tuner 23264 0 - Live 0xe0868000
tveeprom 12524 1 bttv, Live 0xe08cf000
snd_intel8x0 29536 0 - Live 0xe08f1000
snd_ac97_codec 92092 1 snd_intel8x0, Live 0xe08a2000
snd_ac97_bus 1856 1 snd_ac97_codec, Live 0xe0813000
ivtv 215380 1 - Live 0xe090f000
snd_pcm 79048 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec, Live 0xe08ba000
i2c_algo_bit 8776 2 bttv,ivtv, Live 0xe0864000
i2c_nforce2 5696 0 - Live 0xe0861000
snd_timer 20356 1 snd_pcm, Live 0xe083a000
snd 45028 6 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,
Live 0xe0870000
videodev 7104 2 bttv,ivtv, Live 0xe082d000
i2c_core 17360 11
bttv,lirc_i2c,msp3400,saa7115,tda9887,wm8775,cx25840,tuner,tveeprom,i2c_algo_bit,i2c_nforce2,
Live 0xe0834000
soundcore 7200 1 snd, Live 0xe0818000
snd_page_alloc 8456 2 snd_intel8x0,snd_pcm, Live 0xe0829000
nvidia_agp 5980 1 - Live 0xe0815000
agpgart 29320 2 drm,nvidia_agp, Live 0xe081b000
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
5000-5007 : nForce2 SMBus
5040-5047 : nForce2 SMBus
9000-9fff : PCI Bus #01
9000-90ff : 0000:01:08.0
9000-90ff : tulip
a000-afff : PCI Bus #02
a000-a0ff : 0000:02:00.0
b000-b0ff : 0000:00:06.0
b000-b0ff : NVidia nForce2
b400-b47f : 0000:00:06.0
b400-b47f : NVidia nForce2
c000-c01f : 0000:00:01.1
c400-c407 : 0000:00:04.0
c400-c407 : forcedeth
f000-f00f : 0000:00:09.0
f000-f007 : ide0
f008-f00f : ide1
cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cbfff : Video ROM
000cc000-000cd7ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-002ca789 : Kernel code
002ca78a-0035bb13 : Kernel data
1fff0000-1fff2fff : ACPI Non-volatile Storage
1fff3000-1fffffff : ACPI Tables
d0000000-d7ffffff : 0000:00:00.0
d8000000-dfffffff : PCI Bus #02
d8000000-dfffffff : 0000:02:00.0
e0000000-e7ffffff : PCI Bus #01
e0000000-e3ffffff : 0000:01:09.0
e0000000-e200ffff : ivtv0
e4000000-e7ffffff : 0000:01:0a.0
e4000000-e600ffff : ivtv1
e8000000-e9ffffff : PCI Bus #02
e8000000-e801ffff : 0000:02:00.0
e9000000-e907ffff : 0000:02:
00.0
ea000000-ebffffff : PCI Bus #01
ea000000-ea01ffff : 0000:01:08.0
eb000000-eb0003ff : 0000:01:08.0
eb000000-eb0003ff : tulip
ec000000-ec07ffff : 0000:00:05.0
ec080000-ec080fff : 0000:00:06.0
ec080000-ec080fff : NVidia nForce2
ec082000-ec082fff : 0000:00:02.1
ec083000-ec0830ff : 0000:00:02.2
ec084000-ec084fff : 0000:00:04.0
ec084000-ec084fff : forcedeth
ec085000-ec085fff : 0000:00:02.0
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
version?) (rev c1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [40] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit-
FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
Capabilities: [60] #08 [2001]
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
Subsystem: EPoX Computer Co., Ltd.: Unknown device 1000
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
Subsystem: EPoX Computer Co., Ltd.: Unknown device 1000
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
Subsystem: EPoX Computer Co., Ltd.: Unknown device 1000
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
Subsystem: EPoX Computer Co., Ltd.: Unknown device 1000
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
Subsystem: EPoX Computer Co., Ltd.: Unknown device 1000
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3)
Subsystem: EPoX Computer Co., Ltd.: Unknown device 1000
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [48] #08 [01e1]
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: EPoX Computer Co., Ltd.: Unknown device 1000
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at c000 [size=32]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller
(rev a3) (prog-if 10 [OHCI])
Subsystem: EPoX Computer Co., Ltd.: Unknown device 1000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 0
Region 0: Memory at ec085000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller
(rev a3) (prog-if 10 [OHCI])
Subsystem: EPoX Computer Co., Ltd.: Unknown device 1000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 0
Region 0: Memory at ec082000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller
(rev a3) (prog-if 20 [EHCI])
Subsystem: EPoX Computer Co., Ltd.: Unknown device 1000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 5
Region 0: Memory at ec083000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] #0a [2080]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet
Controller (rev a1)
Subsystem: EPoX Computer Co., Ltd.: Unknown device 1000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ec084000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at c400 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
0000:00:05.0 Multimedia audio controller: nVidia Corporation nForce
Audio Processing Unit (rev a2)
Subsystem: EPoX Computer Co., Ltd.: Unknown device 1000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 3000ns max)
Interrupt: pin A routed to IRQ 7
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2
AC97 Audio Controler (MCP) (rev a1)
Subsystem: EPoX Computer Co., Ltd.: Unknown device 1000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at b000 [size=256]
Region 1: I/O ports at b400 [size=128]
Region 2: Memory at ec080000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI
Bridge (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: ea000000-ebffffff
Prefetchable memory behind bridge: e0000000-e7ffffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
(prog-if 8a [Master SecP PriP])
Subsystem: EPoX Computer Co., Ltd.: Unknown device 1000
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
0000:01:08.0 Ethernet controller: Linksys NC100 Network Everywhere
Fast Ethernet 10/100 (rev 11)
Subsystem: Linksys: Unknown device 0570
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (16000ns min, 32000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 9000 [size=256]
Region 1: Memory at eb000000 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at ea000000 [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:09.0 Multimedia video controller: Internext Compression Inc
iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 8801
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:0a.0 Multimedia video controller: Internext Compression Inc
iTVC15 MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-250
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:02:00.0 VGA compatible controller: ATI Technologies Inc Radeon
R100 QD [Radeon 7200] (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Radeon AIW
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 7
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at a000 [size=256]
Region 2: Memory at e9000000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at e8000000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit-
FW- AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
cat /proc/scsi/scsi
cat: /proc/scsi/scsi: No such file or directory
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
[X.] Other notes, patches, fixes, workarounds:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Previous message: Roland Dreier: "Re: [2.6 patch] drivers/infiniband/core/mad.c: fix a NULL pointer dereference"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
- PROBLEM: Framebuffer + geforce FX5200
... a000-bfff: PCI Bus #01 ... 0000:00:00.1 RAM memory: nVidia Corporation nForce2
Memory Controller 1 ... (Linux-Kernel) - PROBLEM: 2.6test11 kernel panic on "head -1 /proc/net/tcp"
... I tried both a kernel with and without pre-emption. ... 9000-9fff: PCI Bus
#01 ... 00:00.0 Host bridge: nVidia Corporation nForce2 AGP ... 00:02.0 USB Controller:
nVidia Corporation nForce2 USB Controller (rev ... (Linux-Kernel) - Re: NForce2 pseudoscience stability testing (2.6.0-test11)
... doesn˙t the kernel get to ... Bios revision? ... 00:00.0 Host
bridge: nVidia Corporation nForce2 AGP ... 00:02.0 USB Controller: nVidia Corporation
nForce2 USB Controller (rev ... (Linux-Kernel) - schedule() problem
... Silicon Integrated Systems Sound Controller ... 00100000-002c5635: Kernel
code ... e0000000-e7ffffff: PCI Bus #01 ... VGA Display Adapter ...
(Linux-Kernel) - PROBLEM : Idle system taks 30-40 % system CPU for no apparent reason
... PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND ... Kernel, Scheduling,
IO ... ... d8000000-e7ffffff: PCI Bus #01 ... Controller ... (Linux-Kernel)
