Re: [OT] 8-port AHCI SATA Controller?
- From: Sander <sander@xxxxxxxxxxx>
- Date: Tue, 31 Jan 2006 18:17:23 +0100
Lennart Sorensen wrote (ao):
> On Tue, Jan 31, 2006 at 12:53:43PM +0100, Sander wrote:
> > I'm looking for an 8-port SATA controller based on the AHCI chipset, as
> > according to http://linux.yyz.us/sata/sata-status.html#vendor_support
> > this chipset is completely open.
>
> Hmm, I am not sure what the specs of AHCI are. Not sure if it supports
> 2 or 4 or more ports.
According to page 7 of the
"Serial ATA Advanced Host Controller Interface Revision 1.1"
(available at http://www.intel.com/technology/serialata/ahci.htm), AHCI
supports up to 32 ports.
For example, Silicon Image 3124 also looks good on paper, but only
supports up to 4 ports.
> The only controllers I have seen that run more than 4 ports, are some
> raid cards, such as 3ware and areca. 3ware has had linux support for
> years, and areca is getting there. Both of those make 12+ port cards,
> which can run in JBOD mode.
Yeah, I know, but because of their real 'hardware' raid, these cards are
three times more expensive per port. And I just need JBOD.
Thanks for your time. Kind regards, Sander
--
Humilis IT Services and Solutions
http://www.humilis.net
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Follow-Ups:
- Re: [OT] 8-port AHCI SATA Controller?
- From: Lennart Sorensen
- Re: [OT] 8-port AHCI SATA Controller?
- References:
- [OT] 8-port AHCI SATA Controller?
- From: Sander
- Re: [OT] 8-port AHCI SATA Controller?
- From: Lennart Sorensen
- [OT] 8-port AHCI SATA Controller?
- Prev by Date: Re: [PATCH 0/11] LED Class, Triggers and Drivers
- Next by Date: Re: 2.6.16-rc1-mm4: ACX=y, ACX_USB=n compile error
- Previous by thread: Re: [OT] 8-port AHCI SATA Controller?
- Next by thread: Re: [OT] 8-port AHCI SATA Controller?
- Index(es):
Relevant Pages
|