Re: [OT] 8-port AHCI SATA Controller?
- From: lsorense@xxxxxxxxxxxxxxxxxxx (Lennart Sorensen)
- Date: Tue, 31 Jan 2006 13:30:13 -0500
On Tue, Jan 31, 2006 at 06:17:23PM +0100, Sander wrote:
> According to page 7 of the
> "Serial ATA Advanced Host Controller Interface Revision 1.1"
> (available at http://www.intel.com/technology/serialata/ahci.htm), AHCI
> supports up to 32 ports.
Hmm, that's a nice feature set. Here is hoping everyone will consider
switching to that, and that no one screws it up and makes a mostly but
not quite compliant version.
> For example, Silicon Image 3124 also looks good on paper, but only
> supports up to 4 ports.
>
> Yeah, I know, but because of their real 'hardware' raid, these cards are
> three times more expensive per port. And I just need JBOD.
Really? How much does a 24 port areca card cost? Is it 12 times the
cost of a two port promise card?
I haven't looked at the prices lately.
Len Sorensen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Follow-Ups:
- Re: [OT] 8-port AHCI SATA Controller?
- From: Joel Jaeggli
- Re: [OT] 8-port AHCI SATA Controller?
- From: Sander
- Re: [OT] 8-port AHCI SATA Controller?
- References:
- [OT] 8-port AHCI SATA Controller?
- From: Sander
- Re: [OT] 8-port AHCI SATA Controller?
- From: Lennart Sorensen
- Re: [OT] 8-port AHCI SATA Controller?
- From: Sander
- [OT] 8-port AHCI SATA Controller?
- Prev by Date: Re: [PATCH] RealTek RTL-8169 Full Duplex Patch
- Next by Date: Re: 2.6.16-rc1-mm4: ACX=y, ACX_USB=n compile error
- Previous by thread: Re: [OT] 8-port AHCI SATA Controller?
- Next by thread: Re: [OT] 8-port AHCI SATA Controller?
- Index(es):
Relevant Pages
- 3Com Megahertz 3CXEM556 B Multifunction Card Not Working
... 3CXEM556 B Ethernet/56K Modem PCMCIA card working on FreeBSD 5.1 on ...
pci0: <PCI bus> on pcib0 ... atapci0: port ... (freebsd-net) - 3Com Megahertz 3CXEM556 B Multifunction Card Not Working
... 3CXEM556 B Ethernet/56K Modem PCMCIA card working on FreeBSD 5.1 on ...
pci0: <PCI bus> on pcib0 ... atapci0: port ... (freebsd-questions) - Re: adding new card in cisco switch 6506
... Port AuxiliaryVlan AuxVlan-Status InlinePowered PowerAllocated ... Line Card
Status for Module 1: ... set vlan 1 name default type ethernet mtu 1500 said 100001 state
active ... set logging level mcast 6 default ... (comp.dcom.sys.cisco) - 5.2.1 - Dolphin 4036 4 port serial? (port 3/4 not recogniced) (repost)
... I built in a card which is identified as Dolphin 4036. ... But there is no way
to get sio6 and 7 (3rd/4th port on the card) working. ... pci_cfgintr: 0:11 INTA BIOS
irq 11 ... on miibus0 ... (freebsd-current) - RE: Wireless PCI card setup
... <Parallel port bus> on ppc0 ... unknown: can't assign resources
... I have been able to bring the card up ... (freebsd-questions)