2.6.16.20 fails to boot on SATA system but works on IDE
- From: Barry Scott <barry.scott@xxxxxxxxxxxx>
- Date: Fri, 16 Jun 2006 16:49:53 +0100
After failing to get 2.6.17-rc6 working on a HP dc7600U I went back
to 2.6.16.20. It also fails to find any volume group during boot.
I think this might be problem with SATA as I can boot the same build on
two other systems that have IDE disks.
I get success on VIA Epia M10000 and a P4 Shuttle systems that use
IDE disks but fail on the HP dc7600U that uses a SATA disk. All three
systems use LVM2.
The Fedora build of 2.6.16 works on all three systems.
I'm going to see if there are debug messages I can turn on it libata
and md that might give more information.
Any suggestions as to what I can do to track down this problem?
Barry
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Prev by Date: Re: [PATCH 9/16] 2.6.17-rc6 perfmon2 patch for review: kernel-level API support (kapi)
- Next by Date: Re: [patch 0/5] [PATCH,RFC] vfs: per-superblock unused dentries list (2nd version)
- Previous by thread: High CPU load and reading from usb intr bulk
- Next by thread: Network performance degradation from 2.6.11.12 to 2.6.16.20
- Index(es):
Relevant Pages
|
