Re: [GIT PATCH] Driver Core patches for 2.6.18



On Tue, 2006-09-26 at 13:39 -0700, Greg KH wrote:
On Tue, Sep 26, 2006 at 12:34:05PM +0000, Mike Galbraith wrote:
On Mon, 2006-09-25 at 22:37 -0700, Greg KH wrote:
Here are a bunch of driver core and sysfs patches and fixes for 2.6.18.

Hi,

Just as an fyi, these patches cause a ~regression on my P4/HT box.

Suspend stopped here working after 2.6.17.

Does 2.6.18 also have these problems?

Suspend failure, yes, kill box on failure, no.

If so, it's not due to these patches :)

The 'Mikie's box' killer is definitely somewhere in these patches. I
decided to test them after having just happened to have tried
2.6.18-rc7-mm1 to see if it the mm tree had fixed my suspend problem for
me, and then seeing your post. Since 2.6.18 with these patches went
from ho-hum broke to ding-dong dead, I figured I should mention it.

I haven't dug into why, but
since then, I get a message "Class driver suspend failed for cpu0", and
the suspend fails, but everything works fine afterward. If I ignore the
return of drv->suspend(), the box will suspend and resume just fine,
both with this patch set and without. (which is what I've been doing
while waiting for it to fix itself or for my round toit to turn up)

What driver is controling cpu0?
What driver is failing the suspend?

Dunno, see below.

What line did you have to change?

drivers/base/sys.c:409

Adding a WARN_ON() there wasn't particularly illuminating. I enabled
debugging (this is virgin 2.6.18), and get the following. I see a
problem I didn't notice before, see 'Hmm' below. I have no idea if it
has anything to do with box killer problem with patchset applied.

SysRq : Emergency Sync
Emergency Sync complete
ieee1394: Node removed: ID:BUS[0-00:1023] GUID[000010dc003bb526]
PM: Removing info for ieee1394:000010dc003bb526-0
PM: Removing info for ieee1394:000010dc003bb526
PM: Removing info for ieee1394:fw-host0
eth1: removing device
ACPI: PCI interrupt for device 0000:02:00.0 disabled
Unloaded prism54 driver
PM: suspend-to-disk mode set to 'platform'
Stopping tasks: ==================================================================================================================|
Shrinking memory... -done (0 pages freed)
eeprom 2-0051: freeze
eeprom 0-0053: freeze
eeprom 0-0052: freeze
eeprom 0-0051: freeze
eeprom 0-0050: freeze
tuner 2-0060: freeze
tuner 2-0043: freeze
tveeprom 2-0050: freeze
ac97 0-0:CMI9761: freeze
ir-kbd-i2c 1-001a: freeze
sd 0:0:0:3: freeze
sd 0:0:0:2: freeze
sd 0:0:0:1: freeze
sd 0:0:0:0: freeze
i8042 i8042: freeze
usbhid 3-2:1.0: freeze
usb 3-2: freeze
usb-storage 3-1:1.0: freeze
usb 3-1: freeze
hub 5-0:1.0: freeze
usb usb5: freeze
hub 4-0:1.0: freeze
usb usb4: freeze
hub 3-0:1.0: freeze
usb usb3: freeze
hub 2-0:1.0: freeze
usb usb2: freeze
hub 1-0:1.0: freeze
usb usb1: freeze
ide-cdrom 1.1: freeze
ide-disk 1.0: freeze
ide-disk 0.0: freeze
serial8250 serial8250: freeze
vesafb vesafb.0: freeze
platform pcspkr: freeze
system 00:0c: freeze
system 00:0b: freeze
mpu401 00:0a: freeze
pnp: Device 00:0a disabled.
i8042 kbd 00:09: freeze
pnp 00:08: freeze
serial 00:07: freeze
pnp: Device 00:07 disabled.
pnp 00:06: freeze
pnp 00:05: freeze
pnp 00:04: freeze
pnp 00:03: freeze
pnp 00:02: freeze
system 00:01: freeze
pnp 00:00: freeze
pci 0000:02:0a.0: freeze
via-rhine 0000:02:09.0: freeze
saa7134 0000:02:03.0: freeze
bt878 0000:02:02.1: freeze
bttv 0000:02:02.0: freeze
pci 0000:02:00.0: freeze
pci 0000:01:00.1: freeze
pci 0000:01:00.0: freeze
Intel ICH 0000:00:1f.5: freeze
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
i801_smbus 0000:00:1f.3: freeze
PIIX_IDE 0000:00:1f.1: freeze
pci 0000:00:1f.0: freeze
pci 0000:00:1e.0: freeze
ehci_hcd 0000:00:1d.7: freeze
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
uhci_hcd 0000:00:1d.3: freeze
ACPI: PCI interrupt for device 0000:00:1d.3 disabled
uhci_hcd 0000:00:1d.2: freeze
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
uhci_hcd 0000:00:1d.1: freeze
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
uhci_hcd 0000:00:1d.0: freeze
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
pci 0000:00:01.0: freeze
agpgart-intel 0000:00:00.0: freeze
acpi acpi: freeze
PM: snapshotting memory.
BUG: warning at drivers/base/sys.c:409/sysdev_suspend()
[<b1003f65>] show_trace_log_lvl+0x179/0x18f
[<b10045f4>] show_trace+0x12/0x14
[<b1004690>] dump_stack+0x19/0x1b
[<b124540f>] sysdev_suspend+0x282/0x2a1
[<b1249798>] device_power_down+0x89/0x99
[<b1037cd0>] swsusp_suspend+0x1b/0x95
[<b10382c6>] pm_suspend_disk+0x5e/0x11a
[<b1037244>] enter_state+0xe1/0x1b3
[<b10373b9>] state_store+0xa3/0xac
[<b10a2270>] subsys_attr_store+0x20/0x25
[<b10a2594>] sysfs_write_file+0x82/0xbf
[<b1063888>] vfs_write+0xa6/0x170
[<b1063e65>] sys_write+0x3d/0x64
[<b1002f17>] syscall_call+0x7/0xb
[<a7e74b8e>] 0xa7e74b8e
Class driver suspend failed for cpu0
Could not power down device à^]H±: error -22
Hmm-------------------------^^^^^
(I had to edit this funky name out and copy/paste it back to convince evolution insert the file)
Some devices failed to power down, aborting suspend
acpi acpi: resuming
ACPI: Unable to turn cooling device [dfff5b80] 'on'
agpgart-intel 0000:00:00.0: resuming
pci 0000:00:01.0: resuming
uhci_hcd 0000:00:1d.0: resuming
PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.1: resuming
PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.2: resuming
PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.3: resuming
PCI: Enabling device 0000:00:1d.3 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
ehci_hcd 0000:00:1d.7: resuming
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PM: Writing back config space on device 0000:00:1d.7 at offset f (was 400, writing 403)
PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing ea200000)
pci 0000:00:1e.0: resuming
PCI: Setting latency timer of device 0000:00:1e.0 to 64
pci 0000:00:1f.0: resuming
PIIX_IDE 0000:00:1f.1: resuming
i801_smbus 0000:00:1f.3: resuming
Intel ICH 0000:00:1f.5: resuming
PCI: Enabling device 0000:00:1f.5 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1f.5 to 64
pci 0000:01:00.0: resuming
pci 0000:01:00.1: resuming
pci 0000:02:00.0: resuming
bttv 0000:02:02.0: resuming
bttv0: reset, reinitialize
bttv0: PLL: 28636363 => 35468950 .. ok
bt878 0000:02:02.1: resuming
saa7134 0000:02:03.0: resuming
via-rhine 0000:02:09.0: resuming
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
pci 0000:02:0a.0: resuming
pnp 00:00: resuming
system 00:01: resuming
pnp 00:02: resuming
pnp 00:03: resuming
pnp 00:04: resuming
pnp 00:05: resuming
pnp 00:06: resuming
serial 00:07: resuming
pnp: Device 00:07 activated.
pnp 00:08: resuming
i8042 kbd 00:09: resuming
pnp: Failed to activate device 00:09.
mpu401 00:0a: resuming
pnp: Device 00:0a activated.
system 00:0b: resuming
system 00:0c: resuming
platform pcspkr: resuming
vesafb vesafb.0: resuming
serial8250 serial8250: resuming
ide-disk 0.0: resuming
ide-disk 1.0: resuming
ide-cdrom 1.1: resuming
usb usb1: resuming
hub 1-0:1.0: resuming
usb usb2: resuming
hub 2-0:1.0: resuming
usb usb3: resuming
hub 3-0:1.0: resuming
usb usb4: resuming
hub 4-0:1.0: resuming
usb usb5: resuming
hub 5-0:1.0: resuming
usb 3-1: resuming
usb-storage 3-1:1.0: resuming
usb 3-2: resuming
usbhid 3-2:1.0: resuming
i8042 i8042: resuming
serio serio0: resuming
atkbd serio1: resuming
sd 0:0:0:0: resuming
sd 0:0:0:1: resuming
sd 0:0:0:2: resuming
sd 0:0:0:3: resuming
ir-kbd-i2c 1-001a: resuming
ac97 0-0:CMI9761: resuming
tveeprom 2-0050: resuming
tuner 2-0043: resuming
tuner 2-0060: resuming
eeprom 0-0050: resuming
eeprom 0-0051: resuming
eeprom 0-0052: resuming
eeprom 0-0053: resuming
eeprom 2-0051: resuming
Restarting tasks... done
Loaded prism54 driver, version 1.2
PCI: Enabling device 0000:02:00.0 (0010 -> 0012)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 19
PM: Adding info for ieee1394:fw-host0
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[ea004000-ea0047ff] Max Packet=[2048] IR/IT contexts=[8/8]


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/