Re: [PATCH 2.6.18-mm2] acpi: add backlight support to the sony_acpi driver

On Sat, 30 Sep 2006 19:08:10 +0200
Alessandro Guido <alessandro.guido@xxxxxxxxx> wrote:

Make the sony_acpi use the backlight subsystem to adjust brightness value
instead of using the /proc/sony/brightness file.
(Other settings will still have a /proc/sony/... entry)

I meant /proc/acpi/sony/brightness and /proc/acpi/sony/...

sorry
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Relevant Pages

  • Re: [PATCH 2.6.18-mm2] acpi: add backlight support to the sony_acpi driver
    ... (Other settings will still have a /proc/sony/... ... Hm spicctrl needs to be updated then. ... Please read the FAQ at http://www.tux.org/lkml/ ...
    (Linux-Kernel)
  • Re: Defrag Probs and Lag Time
    ... etc. to set the IE settings correctly? ... Clicking on the entry for your hard drive should display the ... enter chkdsk C: ... look for an Information type entry ...
    (microsoft.public.windowsxp.perform_maintain)
  • Re: ActiveSync 4.2 not working on WM5.0 device over USB Serial Function driver
    ... I have made sure that all the settings are done as per the requirement. ... USB Mass Storage functionality is working on WM.But for the same USB ... driver the serial function class is now working for ActiveSync. ... Entry for USBFN Serial Client ...
    (microsoft.public.pocketpc)
  • Re: Dual stack with multiple addresses in rc.conf
    ... Your config entry for ifconfig_fxp0 is specified twice, ... it is more correct to put IPV6 settings in a separate entry. ... If you are not the intended recipient or have ... or otherwise use this message or its attachments. ...
    (freebsd-net)
  • Re: Create a console app under EmbeddedVC4, and debug it
    ... > I compared the settings of this project with that of the console project ... I think there's documentation of the right entry ... >>> and then installed the SDK which has a console and now I can connect to ... So I replaced the WinMain with main, ...
    (microsoft.public.windowsce.embedded)