Re: [PATCH 2.6.20-rc2] Add a quirk to allow ENE PCI SD card readers to work again



I demand that I definitely did write...

Add a quirk to allow ENE PCI SD card readers to work again

Support for these devices was broken for 2.6.18-rc1 and later by commit
146ad66eac836c0b976c98f428d73e1f6a75270d, which added voltage level
support.

This restores the previous behaviour for these devices by ensuring that
when the voltage is changed, only one write to set the voltage is
performed.
[snip]

Oops, forgot to ask - could people test and report back? lspci output (for
your device) may be helpful.

--
| Darren Salt | d @ youmustbejoking,demon,co,uk | nr. Ashington, | Toon
| RISC OS, Linux | s zap,tartarus,org | Northumberland | Army
| + Travel less. Share transport more. PRODUCE LESS CARBON DIOXIDE.

regular guy: n. A person who occurs at fixed or pre-arranged intervals.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



Relevant Pages

  • Re: [patch/rfc 2.6.29-rc6 1/2] regulator: enumerate voltages
    ... voltage options that are defined as "not supported". ... All of which model nicely as a mapping {selector --> voltage}. ... The regulator driver is already doing that for get_voltage: ... It will be fairly common for the regulator to support voltages ...
    (Linux-Kernel)
  • Re: high input to CPLD
    ... Can we direcly give the high inut voltage i.e. +5V to its input pin? ... the newer parts run on lower voltage and at least recent FPGAs would not even support 5V - that is why we use some of the old FPGAs as well ... ... Looks like you can still buy them but recent Xilinx ISE tools do not support them any more so we have a few machines still running ISE 4! ...
    (comp.arch.fpga)
  • [PATCH 2.6.20-rc2] Add a quirk to allow ENE PCI SD card readers to work again
    ... Add a quirk to allow ENE PCI SD card readers to work again ... Support for these devices was broken for 2.6.18-rc1 and later by commit ... which added voltage level support. ...
    (Linux-Kernel)
  • Re: portable audio recorder
    ... support the voltage spec'd ... Are you saying it wasn't putting out the spec'd 30V phantom? ...
    (rec.audio.pro)
  • Re: Updated MaxSonar-EZ1 Datasheet and Updated Website
    ... voltage level RS232 is desired, invert, and connect an RS232 converter ... levels it is compatible with the standard ...
    (comp.robotics.misc)