Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64
- From: Len Brown <lenb@xxxxxxxxxx>
- Date: Wed, 3 Jan 2007 01:17:31 -0500
..same problem with 2.6.20-rc3. Last worked with
2.6.19-rc6-git12, so it was 2.6.19 where it failed.
Attaching both case1 normal, case2 acpi=noirq. With acpi=noirq ethernet
doesn't get configured, route -n says it's an Unsupported operation,
ifconfig only shows for localhost, ifconfig eth0 192.168.10.5 also
complains of a config error.
It seems that the "acpi=noirq" (and probably also the acpi=off) case
is simply an additional broken case, not a success case to compare to.
The thing we really want to compare is dmesg and /proc/interrupts
from 2.6.19-rc6-git12, and the broken current release.
Perhaps you can put that info in the bug report when you file it.
thanks,
-Len
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Follow-Ups:
- Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64
- From: Sid Boyce
- Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64
- References:
- Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64
- From: Sid Boyce
- Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64
- From: Len Brown
- Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64
- From: Sid Boyce
- Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64
- Prev by Date: Re: Section mismatch on current git head
- Next by Date: Re: 2.6.20-rc3: known unfixed regressions - x86_64 boot failure: "IO-APIC + timer doesn't work"
- Previous by thread: Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64
- Next by thread: Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64
- Index(es):
Relevant Pages
|
