Kernel 2.6.19.2: Belkin UPS on Serial vs. USB
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
- Date: Fri, 26 Jan 2007 12:54:02 -0500 (EST)
When I disconnect my UPS from the wall, I have to wait 15-30 seconds
before the USB drier 'polls' this information and tells me that the UPS is
on battery power (via knutclient or syslog via nut):
ups@p34 POWER ALERT on Fri Jan 26 12:49:29 EST 2007
With a serial connection, I would get the alerts IMMEDIATELY (0.5-1
seconds) after disconnecting the UPS. My new machine does not have a
serial port built-in, only a serial header, and of course does not come
with an included cable, so I chose to use USB.
My question is, how do I change the polling time for the USB subsystem to
match that of the serial port, or would I not want to do that for other
reasons?
The reason I'd like to is I am not going to see any power alerts for
unless there is a power outage for longer than 15-30 seconds.
Justin.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Follow-Ups:
- Re: Kernel 2.6.19.2: Belkin UPS on Serial vs. USB
- From: Greg KH
- Re: Kernel 2.6.19.2: Belkin UPS on Serial vs. USB
- Prev by Date: Re: [PATCH 3/8] Allow huge page allocations to use GFP_HIGH_MOVABLE
- Next by Date: Re: [ANNOUNCE] System Inactivity Monitor v1.0
- Previous by thread: [PATCH] Boot loader ID for Gujin
- Next by thread: Re: Kernel 2.6.19.2: Belkin UPS on Serial vs. USB
- Index(es):
Relevant Pages
|
