Re: Linux 2.6.22-rc2
- From: Stephen Hemminger <shemminger@xxxxxxxxxxxxxxxxxxxx>
- Date: Mon, 21 May 2007 10:37:55 -0700
On Mon, 21 May 2007 13:10:55 -0400
Mike Houston <mikeserv@xxxxxxxx> wrote:
On Mon, 21 May 2007 08:45:49 -0700
Stephen Hemminger <shemminger@xxxxxxxxxxxxxxxxxxxx> wrote:
It's almost certainly a problem with the BIOS and hardware (not a
sky2) driver issue. Since there are many similar boards and
configurations, I made the decision not to enforce restrictions in
the driver.
May 20 15:57:48 cramit kernel: sky2 0000:04:00.0: v1.14 addr
0xf8000000 irq 16 Yukon-EC Ultra (0xb4) rev 2
Thank you for your answer. I was half wondering if that was the case
after staring at those log messages several more times. I don't
understand hardware at the low level but got thinking maybe interrupt
routing issue. There's an Nvidia PCI Express card in there that gets
IRQ 16, though it was not initialized by a driver at the time. (plain
old VGA console after fresh cold boot... no framebuffer, no X, no
nvidia module). I guess some things don't share well.
It works well in that other OS that came with the hardware, but
that's beside the point.
It is some low level PCI Express related stuff, try latest BIOS (F9)
and if that doesn't help there is a EEPROM update from Gigabyte
for the Marvell hardware that might help.
--
Stephen Hemminger <shemminger@xxxxxxxxxxxxxxxxxxxx>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Follow-Ups:
- Re: Linux 2.6.22-rc2
- From: Mike Houston
- Re: Linux 2.6.22-rc2
- References:
- Linux 2.6.22-rc2
- From: Linus Torvalds
- Re: Linux 2.6.22-rc2
- From: Mike Houston
- Re: Linux 2.6.22-rc2
- From: Stephen Hemminger
- Re: Linux 2.6.22-rc2
- From: Mike Houston
- Linux 2.6.22-rc2
- Prev by Date: Re: [PATCH]serial: make early_uart to use early_prarm instead of console_initcall
- Next by Date: Re: [PROBLEM] 2.6.22-rc2 panics on x86-64 with slub
- Previous by thread: Re: Linux 2.6.22-rc2
- Next by thread: Re: Linux 2.6.22-rc2
- Index(es):
Relevant Pages
|