[Possible BUG] Logitech USB keyboard inconsistent led state

Dear Kernel Developers,

I'm using a logitech USB keyboard, I think it's one of the most cheap
and diffuse logitech keyboard models.

I have an inconsistent led state. During boot the NumLock led blinks
several times and is on as boot finishes. However the numeric keypad
works as it was off (no numbers, keypad '.' works as Canc, '0' as Ins
and so on).

To restore a consistent state I have to press one key that change one
of the 3 leds on the keyboards: NumLock, CapsLock or ScrollLock.

Once I pressed one of those key the NumLock led turns off and,
eventually, another led turns on. After this if I press NumLock I have
the keypad enabled.

I'm able to reproduce the problem only once after a system boot (with
or without X). Unplugging the keyboard and unloading/reloading all the
usb stack always gives again a consistent state.

The problem is reproduced with various kernels from 2.6.18 official
debian etch build, until 2.6.22-rc5-cfs-v18-cfs.

Some keyboard info from dmesg:

kernel: usb 1-1.2: new low speed USB device using uhci_hcd and address 5
kernel: usb 1-1.2: Product: USB Multimedia Keyboard
kernel: usb 1-1.2: Manufacturer: BTC
kernel: usb 1-1.2: configuration #1 chosen from 1 choice
kernel: input: BTC USB Multimedia Keyboard as /class/input/input8
kernel: input: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on
usb-0000:00:07.2-1.2
kernel: input: BTC USB Multimedia Keyboard as /class/input/input9
kernel: input,hiddev96: USB HID v1.10 Device [BTC USB Multimedia
Keyboard] on usb-0000:00:07.2-1.2

If you need further information just ask.


Regards,

~ Antonio
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Relevant Pages

  • Re: uhidev(4) update - USB HID driver level for devices with multiple report ids
    ... I can connect keyboard after boot and it works, ... But If I've boot with connected USB keyboard - system panics: ... page fault while in kernel mode ...
    (freebsd-current)
  • Re[2]: HID support
    ... I have already tried using the two little usb to serial ... > F> installing FreeBSD 5.3 using an USB keyboard the keyboard will stop working ... select ``Escape to loader prompt'' in the boot ... > Maybe some good guys knows how configure FreeBSD for better HID support (maybe ...
    (freebsd-questions)
  • Re: PS/2 keyboard & mouse no longer work
    ... some pc speaker beeps (like at boot time) then the computer froze. ... Upon reboot, there was a series of briek beeps, and neither keyboard ... I've plugged keyboard and mouse in my laptop (usb only) and they work ...
    (microsoft.public.windowsxp.hardware)
  • Re[2]: HID support
    ... I have already tried using the two little usb to serial ... > F> installing FreeBSD 5.3 using an USB keyboard the keyboard will stop working ... select ``Escape to loader prompt'' in the boot ... > Maybe some good guys knows how configure FreeBSD for better HID support (maybe ...
    (freebsd-questions)
  • Re[2]: HID support
    ... I have already tried using the two little usb to serial ... > F> installing FreeBSD 5.3 using an USB keyboard the keyboard will stop working ... select ``Escape to loader prompt'' in the boot ... > Maybe some good guys knows how configure FreeBSD for better HID support (maybe ...
    (freebsd-questions)