Re: libata not working for sis5533

On 08/31/2007 06:20 PM, Patrizio Bassi wrote:
Patrizio Bassi ha scritto:
Michal Piotrowski ha scritto:
Hi,

[Adding IDE wizards to CC]

On 26/08/07, Patrizio Bassi <patrizio.bassi@xxxxxxxxx> wrote:

My sis630 chipset shipped with Asus A1000
doesn't work properly with suspend with ide drivers
(http://bugzilla.kernel.org/show_bug.cgi?id=7077)

i tried to switch to libata but i cannot boot.
I've enabled generic ide and sis specific code, both in-kernel. of
course scsi too.

when i boot i get: irq #14 nobody cared and stop

i have to remove battery to reboot pc.
I'm using 2.6.22.5, but i never got any libata kernel working.

Patrizio

ps. i'm writing from my desktop as i'm doing hardware mainteinance on
the laptop and could not boot it

Please CC me.

lspci:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
Bridge)
00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
PCI Fast Ethernet (rev 80)
00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 07)
00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 07)
00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
SiS PCI Audio Accelerator (rev 01)
00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
Controller (rev a0)
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
PCI-to-PCI bridge (AGP)
00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
630/730 PCI/AGP VGA Display Adapter (rev 11)

Regards,
Michal



i've been out for a week, but found no notice, did i lost any email or
no activity on this issue?


I assume you tried the standard workarounds, like

pci=nommconf,nomsi
pci=noacpi
pci=biosirq

(one at at time, not all at once.)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Relevant Pages

  • Re: Problem with ata layer in 2.6.24
    ... the thing is, i run 6x300gb disks, IDE, in raid5. ... i have both an onboard via ide controller, and then i bought a promise ... PROPERLY(thank you libata!). ...
    (Linux-Kernel)
  • Re: Is it possible to boot from PCI-IDE controller?
    ... > The IDE controller on the motherboard appears to be faulty. ... > Flash IDE disk with an embedded Linux all of which boot up in another ... The floppy controller is separate from the IDE controller, ...
    (comp.os.linux.hardware)
  • Re: libata not working for sis5533
    ... [Adding IDE wizards to CC] ... i tried to switch to libata but i cannot boot. ... but i never got any libata kernel working. ... Controller ...
    (Linux-Kernel)
  • Re: libata and legacy ide pcmcia failure
    ... I recompiled the kernel with libata, and made legacy ide modular. ... This allowed me to boot my PATA HDD with libata, and when I plugged in the PCMCIA card it picked it up automatically with the legacy ide drivers. ... Jun 10 02:40:07 localhost kernel: cs: memory probe 0xe8000000-0xefffffff: excluding 0xe8000000-0xefffffff ...
    (Linux-Kernel)
  • Re: How to I get windows to remap drives on bootup
    ... I use 2 pairs of ide buses to control ... > hda - this is where the BIO bootup stuff is written by lilo ... > The motherboard controller. ... > hde - this the first ide device where the BIOS will boot off ...
    (comp.os.linux.setup)