[git patches] IDE updates part 1


Hi,

Since it's "Merging Spree" again here goes the first IDE update for 2.6.26:

- couple of fixes and preparatory patches for IDE warm-plug support

- rework of PowerMac media-bay support ([un]register IDE devices instead of
[un]registering IDE interface)

- IDE warm-plug support, to warm-plug devices on a port 'idex':

# echo -n "1" > /sys/class/ide_port/idex/delete_devices

unplug old device(s) and plug new device(s)

#echo -n "1" > /sys/class/ide_port/idex/scan

done!

- ability to add new interfaces for ide-generic host driver through
/sys/class/ide_generic/add, i.e.

echo -n "0x168:0x36e:10" > /sys/class/ide_generic/add

- generic packet command representation for ATAPI (Borislav Petkov)

- scc_pata update (Akira Iguchi)

- misc stuff...


Because of the above changes some obsoleted/broken code can be removed
(~250 LOC) together with PPC specific hacks (~500 LOC).

Almost all patches have been in IDE tree (which is propagated to both
-mm and -next trees) since middle of February so they should be pretty
polished by now (extra thanks to Sergei Shtylyov for the hard work on
reviewing IDE patches).


Linus, please pull from:

master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/

to receive the following updates:

Documentation/ide/ide.txt | 47 +---
Documentation/ide/warm-plug-howto.txt | 13 +
Documentation/kernel-parameters.txt | 4 +-
arch/powerpc/kernel/setup_32.c | 8 -
arch/powerpc/platforms/powermac/pci.c | 22 --
arch/powerpc/platforms/powermac/pmac.h | 5 -
arch/powerpc/platforms/powermac/setup.c | 8 -
arch/ppc/configs/sandpoint_defconfig | 2 +-
arch/ppc/kernel/ppc_ksyms.c | 5 -
arch/ppc/kernel/setup.c | 2 -
arch/ppc/platforms/4xx/bamboo.c | 1 -
arch/ppc/platforms/4xx/ebony.c | 1 -
arch/ppc/platforms/4xx/luan.c | 1 -
arch/ppc/platforms/4xx/ocotea.c | 1 -
arch/ppc/platforms/4xx/taishan.c | 1 -
arch/ppc/platforms/4xx/yucca.c | 1 -
arch/ppc/platforms/chestnut.c | 1 -
arch/ppc/platforms/cpci690.c | 1 -
arch/ppc/platforms/ev64260.c | 1 -
arch/ppc/platforms/hdpu.c | 36 --
arch/ppc/platforms/lopec.c | 85 -----
arch/ppc/platforms/mvme5100.c | 1 -
arch/ppc/platforms/powerpmc250.c | 1 -
arch/ppc/platforms/pplus.c | 58 ----
arch/ppc/platforms/prep_setup.c | 38 ---
arch/ppc/platforms/prpmc750.c | 1 -
arch/ppc/platforms/prpmc800.c | 1 -
arch/ppc/platforms/radstone_ppc7d.c | 1 -
arch/ppc/platforms/residual.c | 1 -
arch/ppc/platforms/sandpoint.c | 94 ------
arch/ppc/platforms/sandpoint.h | 3 -
arch/ppc/platforms/spruce.c | 1 -
arch/ppc/syslib/m8xx_setup.c | 6 -
arch/ppc/syslib/ppc4xx_setup.c | 23 --
block/compat_ioctl.c | 1 -
drivers/ide/Kconfig | 44 +--
drivers/ide/Makefile | 2 +-
drivers/ide/arm/bast-ide.c | 6 +-
drivers/ide/arm/palm_bk3710.c | 6 +-
drivers/ide/arm/rapide.c | 2 +-
drivers/ide/cris/ide-cris.c | 18 +-
drivers/ide/ide-acpi.c | 2 +
drivers/ide/ide-cd.c | 10 +-
drivers/ide/ide-floppy.c | 346 ++++++++------------
drivers/ide/ide-generic.c | 89 +++++-
drivers/ide/ide-io.c | 38 ++-
drivers/ide/ide-iops.c | 86 +++--
drivers/ide/ide-pnp.c | 2 +-
drivers/ide/ide-probe.c | 134 +++++++--
drivers/ide/ide-proc.c | 19 +-
drivers/ide/ide-scan-pci.c | 9 +-
drivers/ide/ide-tape.c | 536 ++++++++++++++----------------
drivers/ide/ide-taskfile.c | 29 +-
drivers/ide/ide.c | 419 ++++++-------------------
drivers/ide/legacy/Makefile | 1 +
drivers/ide/legacy/ali14xx.c | 12 +
drivers/ide/legacy/dtc2278.c | 12 +
drivers/ide/legacy/ht6560b.c | 25 ++-
drivers/ide/legacy/ide-4drives.c | 50 +++
drivers/ide/legacy/ide-cs.c | 8 +-
drivers/ide/legacy/ide_platform.c | 2 +-
drivers/ide/legacy/qd65xx.c | 19 +-
drivers/ide/legacy/umc8672.c | 12 +
drivers/ide/mips/au1xxx-ide.c | 5 +-
drivers/ide/pci/cmd640.c | 34 +-
drivers/ide/pci/delkin_cb.c | 8 +-
drivers/ide/pci/hpt366.c | 61 +----
drivers/ide/pci/ns87415.c | 4 +
drivers/ide/pci/scc_pata.c | 70 +++-
drivers/ide/pci/sgiioc4.c | 20 +-
drivers/ide/pci/siimage.c | 43 ---
drivers/ide/pci/sl82c105.c | 4 +
drivers/ide/pci/tc86c001.c | 36 --
drivers/ide/ppc/mpc8xx.c | 86 ++----
drivers/ide/ppc/pmac.c | 104 +-----
drivers/ide/setup-pci.c | 20 +--
drivers/macintosh/mediabay.c | 17 +-
drivers/scsi/ide-scsi.c | 203 +++++-------
include/asm-alpha/ide.h | 11 -
include/asm-arm/ide.h | 8 -
include/asm-blackfin/ide.h | 4 -
include/asm-ia64/ide.h | 10 -
include/asm-m32r/ide.h | 10 -
include/asm-mips/mach-generic/ide.h | 10 -
include/asm-parisc/ide.h | 2 -
include/asm-powerpc/ide.h | 57 ++--
include/asm-powerpc/mediabay.h | 6 +-
include/asm-sh/ide.h | 3 -
include/asm-sparc/ide.h | 2 -
include/asm-sparc64/ide.h | 2 -
include/asm-x86/ide.h | 10 -
include/linux/hdreg.h | 4 +-
include/linux/ide.h | 174 ++++++----
93 files changed, 1336 insertions(+), 2106 deletions(-)
create mode 100644 Documentation/ide/warm-plug-howto.txt
create mode 100644 drivers/ide/legacy/ide-4drives.c


Akira Iguchi (1):
scc_pata.c: do setup itself instead of ide_setup_pci_device()

Bartlomiej Zolnierkiewicz (46):
ide-generic: set hwif->chipset
ide: fix ide_find_port()
ide: use ide_find_port() instead of ide_deprecated_find_port()
ide-acpi: add missing drive->acpidata zeroing
ide: factor out cable detection from ide_init_port()
ide: remove IDE devices from /proc/ide/ before unregistering them
ide: factor out code unregistering devices from ide_unregister()
ide: factor out devices init from ide_init_port_data()
ide: move ide_port_setup_devices() call to ide_device_add_all()
ide: rework PowerMac media-bay support (take 2)
ide: remove dead/obsolete ->busproc method
ide: add warm-plug support for IDE devices (take 2)
ide-generic: add ide_generic class and attribute for adding new interfaces
ide: remove needless CONFIG_BLK_DEV_HD hack from init_hwif()
ide: remove CONFIG_BLK_DEV_HD_IDE config option (take 2)
ide: remove obsoleted "idex=base[,ctl[,irq]]" kernel parameters (take 2)
ide: remove broken/dangerous HDIO_[UNREGISTER,SCAN]_HWIF ioctls (take 3)
ide: remove ->hold field from ide_hwif_t (take 2)
ide: remove init_hwif_default()
ide: remove ide_init_hwif_ports()
ide: add ide_atapi_{discard_data,write_zeros} inline helpers
ide: remove IDE_*_REG macros
ide-pmac: remove dead code
ppc/hdpu: remove dead IDE code
ppc/ppc4xx: remove ppc_ide_md hooks
ppc/pmac: remove ppc_ide_md hooks
ppc/mpc8xx: remove ppc_ide_md hooks
ppc/lopec: remove ppc_ide_md hooks
ppc/sandpoint: remove ppc_ide_md hooks
ppc/pplus: remove ppc_ide_md.ide_init_hwif hook
ppc: remove ppc_ide_md
ppc: don't include <linux/ide.h>
ppc/pmac: remove no longer needed IDE quirk
ide: add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS (take 2)
ide: remove CONFIG_IDE_ARCH_OBSOLETE_INIT
ide: remove ide_default_io_ctl() macro
ide: remove ppc ifdef from init_ide_data()
ide: add ide-4drives host driver (take 3)
cmd640: cleanup setup_device_ptrs()
cmd640: init hwif->{io_ports,irq} explicitly
ide: limit legacy VLB host drivers to alpha, x86 and mips
ide: init hwif->{io_ports,irq} explicitly in legacy VLB host drivers
ide: remove needless hwif->irq check from ide_hwif_configure()
ide: remove obsoleted "idex=noprobe" kernel parameter (take 2)
ide: move default IDE ports setup to ide_generic host driver
ide: remove ide_init_default_irq() macro

Borislav Petkov (10):
ide-floppy: remove struct idefloppy_id_gcw
ide-tape: move all struct and other defs at the top
ide-tape: remove atomic test/set macros for packet commands
ide: add generic packet command representation ide_atapi_pc
ide-tape: convert driver to using generic ide_atapi_pc
ide-floppy: convert driver to using generic ide_atapi_pc
ide-scsi: convert driver to using generic ide_atapi_pc
ide-floppy: rename end_request handler properly
ide: use generic ATAPI packet command flags in ide-{floppy,tape}
ide-scsi: do non-atomic pc->flags testing

Greg Kroah-Hartman (1):
IDE: remove ide=reverse IDE core


diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt
index 818676a..486c699 100644
--- a/Documentation/ide/ide.txt
+++ b/Documentation/ide/ide.txt
@@ -71,29 +71,6 @@ This driver automatically probes for most IDE interfaces (including all PCI
ones), for the drives/geometries attached to those interfaces, and for the IRQ
lines being used by the interfaces (normally 14, 15 for ide0/ide1).

-For special cases, interfaces may be specified using kernel "command line"
-options. For example,
-
- ide3=0x168,0x36e,10 /* ioports 0x168-0x16f,0x36e, irq 10 */
-
-Normally the irq number need not be specified, as ide.c will probe for it:
-
- ide3=0x168,0x36e /* ioports 0x168-0x16f,0x36e */
-
-The standard port, and irq values are these:
-
- ide0=0x1f0,0x3f6,14
- ide1=0x170,0x376,15
- ide2=0x1e8,0x3ee,11
- ide3=0x168,0x36e,10
-
-Note that the first parameter reserves 8 contiguous ioports, whereas the
-second value denotes a single ioport. If in doubt, do a 'cat /proc/ioports'.
-
-In all probability the device uses these ports and IRQs if it is attached
-to the appropriate ide channel. Pass the parameter for the correct ide
-channel to the kernel, as explained above.
-
Any number of interfaces may share a single IRQ if necessary, at a slight
performance penalty, whether on separate cards or a single VLB card.
The IDE driver automatically detects and handles this. However, this may
@@ -184,13 +161,6 @@ provided it is mounted with the default block size of 1024 (as above).
Please pass on any feedback on any of this stuff to the maintainer,
whose address can be found in linux/MAINTAINERS.

-Note that if BOTH hd.c and ide.c are configured into the kernel,
-hd.c will normally be allowed to control the primary IDE interface.
-This is useful for older hardware that may be incompatible with ide.c,
-and still allows newer hardware to run on the 2nd/3rd/4th IDE ports
-under control of ide.c. To have ide.c also "take over" the primary
-IDE port in this situation, use the "command line" parameter: ide0=0x1f0
-
The IDE driver is modularized. The high level disk/CD-ROM/tape/floppy
drivers can always be compiled as loadable modules, the chipset drivers
can only be compiled into the kernel, and the core code (ide.c) can be
@@ -206,7 +176,7 @@ When ide.c is used as a module, you can pass command line parameters to the
driver using the "options=" keyword to insmod, while replacing any ',' with
';'. For example:

- insmod ide.o options="ide0=serialize ide1=serialize ide2=0x1e8;0x3ee;11"
+ insmod ide.o options="hda=nodma hdb=nodma"


================================================================================
@@ -247,21 +217,11 @@ Summary of ide driver parameters for kernel command line
As for VLB, it is safest to not specify it.
Bigger values are safer than smaller ones.

- "idex=base" : probe for an interface at the addr specified,
- where "base" is usually 0x1f0 or 0x170
- and "ctl" is assumed to be "base"+0x206
-
- "idex=base,ctl" : specify both base and ctl
-
- "idex=base,ctl,irq" : specify base, ctl, and irq number
-
"idex=serialize" : do not overlap operations on idex. Please note
that you will have to specify this option for
both the respective primary and secondary channel
to take effect.

- "idex=four" : four drives on idex and ide(x^1) share same ports
-
"idex=reset" : reset interface after probe

"idex=ata66" : informs the interface that it has an 80c cable
@@ -269,8 +229,6 @@ Summary of ide driver parameters for kernel command line
ability to bit test for detection is currently
unknown.

- "ide=reverse" : formerly called to pci sub-system, but now local.
-
"ide=doubler" : probe/support IDE doublers on Amiga

There may be more options than shown -- use the source, Luke!
@@ -290,6 +248,9 @@ Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb"
kernel paremeter to enable probing for VLB version of the chipset (PCI ones
are detected automatically).

+You also need to use "probe" kernel parameter for ide-4drives driver
+(support for IDE generic chipset with four drives on one port).
+
================================================================================

Some Terminology
diff --git a/Documentation/ide/warm-plug-howto.txt b/Documentation/ide/warm-plug-howto.txt
new file mode 100644
index 0000000..d588546
--- /dev/null
+++ b/Documentation/ide/warm-plug-howto.txt
@@ -0,0 +1,13 @@
+
+IDE warm-plug HOWTO
+===================
+
+To warm-plug devices on a port 'idex':
+
+# echo -n "1" > /sys/class/ide_port/idex/delete_devices
+
+unplug old device(s) and plug new device(s)
+
+# echo -n "1" > /sys/class/ide_port/idex/scan
+
+done
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index dafd001..239e78a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -763,11 +763,11 @@ and is between 256 and 4096 characters. It is defined in the file
Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]

ide= [HW] (E)IDE subsystem
- Format: ide=nodma or ide=doubler or ide=reverse
+ Format: ide=nodma or ide=doubler
See Documentation/ide/ide.txt.

ide?= [HW] (E)IDE subsystem
- Format: ide?=noprobe or chipset specific parameters.
+ Format: ide?=ata66 or chipset specific parameters.
See Documentation/ide/ide.txt.

idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index cd870a8..06d918d 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -10,9 +10,6 @@
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
-#if defined(CONFIG_IDE) || defined(CONFIG_IDE_MODULE)
-#include <linux/ide.h>
-#endif
#include <linux/tty.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
@@ -51,11 +48,6 @@

extern void bootx_init(unsigned long r4, unsigned long phys);

-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-struct ide_machdep_calls ppc_ide_md;
-EXPORT_SYMBOL(ppc_ide_md);
-#endif
-
int boot_cpuid;
EXPORT_SYMBOL_GPL(boot_cpuid);
int boot_cpuid_phys;
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 1c58db9..bcf50d7 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1144,28 +1144,6 @@ void __init pmac_pcibios_after_init(void)
{
struct device_node* nd;

-#ifdef CONFIG_BLK_DEV_IDE
- struct pci_dev *dev = NULL;
-
- /* OF fails to initialize IDE controllers on macs
- * (and maybe other machines)
- *
- * Ideally, this should be moved to the IDE layer, but we need
- * to check specifically with Andre Hedrick how to do it cleanly
- * since the common IDE code seem to care about the fact that the
- * BIOS may have disabled a controller.
- *
- * -- BenH
- */
- for_each_pci_dev(dev) {
- if ((dev->class >> 16) != PCI_BASE_CLASS_STORAGE)
- continue;
- if (pci_enable_device(dev))
- printk(KERN_WARNING
- "pci: Failed to enable %s\n", pci_name(dev));
- }
-#endif /* CONFIG_BLK_DEV_IDE */
-
for_each_node_by_name(nd, "firewire") {
if (nd->parent && (of_device_is_compatible(nd, "pci106b,18") ||
of_device_is_compatible(nd, "pci106b,30") ||
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index b3abaaf..3362e78 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -2,7 +2,6 @@
#define __PMAC_H__

#include <linux/pci.h>
-#include <linux/ide.h>
#include <linux/irq.h>

/*
@@ -35,10 +34,6 @@ extern void pmac_check_ht_link(void);

extern void pmac_setup_smp(void);

-extern unsigned long pmac_ide_get_base(int index);
-extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
- unsigned long data_port, unsigned long ctrl_port, int *irq);
-
extern int pmac_nvram_init(void);
extern void pmac_pic_init(void);

diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 36ff1b6..2693fc3 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -574,14 +574,6 @@ static int __init pmac_probe(void)
ISA_DMA_THRESHOLD = ~0L;
DMA_MODE_READ = 1;
DMA_MODE_WRITE = 2;
-
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports;
- ppc_ide_md.default_io_base = pmac_ide_get_base;
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
-#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */
-
#endif /* CONFIG_PPC32 */

#ifdef CONFIG_PMAC_SMU
diff --git a/arch/ppc/configs/sandpoint_defconfig b/arch/ppc/configs/sandpoint_defconfig
index fb493a6..9525e34 100644
--- a/arch/ppc/configs/sandpoint_defconfig
+++ b/arch/ppc/configs/sandpoint_defconfig
@@ -189,7 +189,7 @@ CONFIG_IDE_TASKFILE_IO=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_SL82C105=y
# CONFIG_BLK_DEV_IDEPCI is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index c353502..2ba659f 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -12,7 +12,6 @@
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/pm.h>
#include <linux/bitops.h>

@@ -124,10 +123,6 @@ EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */

-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-EXPORT_SYMBOL(ppc_ide_md);
-#endif
-
#ifdef CONFIG_PCI
EXPORT_SYMBOL(isa_io_base);
EXPORT_SYMBOL(isa_mem_base);
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 2940559..bfddfde 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -10,7 +10,6 @@
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
-#include <linux/ide.h>
#include <linux/screen_info.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
@@ -57,7 +56,6 @@ extern void ppc6xx_idle(void);
extern void power4_idle(void);

extern boot_infos_t *boot_infos;
-struct ide_machdep_calls ppc_ide_md;

/* Used with the BI_MEMSIZE bootinfo parameter to store the memory
size value reported by the boot loader. */
diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
index 017623c..01f20f4 100644
--- a/arch/ppc/platforms/4xx/bamboo.c
+++ b/arch/ppc/platforms/4xx/bamboo.c
@@ -22,7 +22,6 @@
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
index 453643a..8027a36 100644
--- a/arch/ppc/platforms/4xx/ebony.c
+++ b/arch/ppc/platforms/4xx/ebony.c
@@ -25,7 +25,6 @@
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
index b79ebb8..f6d8c2e 100644
--- a/arch/ppc/platforms/4xx/luan.c
+++ b/arch/ppc/platforms/4xx/luan.c
@@ -23,7 +23,6 @@
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
index 28a712c..308386e 100644
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -23,7 +23,6 @@
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c
index f6a0c66..1156942 100644
--- a/arch/ppc/platforms/4xx/taishan.c
+++ b/arch/ppc/platforms/4xx/taishan.c
@@ -23,7 +23,6 @@
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
index 66a44ff..f6cfd44 100644
--- a/arch/ppc/platforms/4xx/yucca.c
+++ b/arch/ppc/platforms/4xx/yucca.c
@@ -24,7 +24,6 @@
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/chestnut.c b/arch/ppc/platforms/chestnut.c
index dcd6070..27c140f 100644
--- a/arch/ppc/platforms/chestnut.c
+++ b/arch/ppc/platforms/chestnut.c
@@ -22,7 +22,6 @@
#include <linux/initrd.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
-#include <linux/ide.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
diff --git a/arch/ppc/platforms/cpci690.c b/arch/ppc/platforms/cpci690.c
index e78bccf..07f672d 100644
--- a/arch/ppc/platforms/cpci690.c
+++ b/arch/ppc/platforms/cpci690.c
@@ -10,7 +10,6 @@
*/
#include <linux/delay.h>
#include <linux/pci.h>
-#include <linux/ide.h>
#include <linux/irq.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c
index c1f77e1..f522b31 100644
--- a/arch/ppc/platforms/ev64260.c
+++ b/arch/ppc/platforms/ev64260.c
@@ -23,7 +23,6 @@

#include <linux/delay.h>
#include <linux/pci.h>
-#include <linux/ide.h>
#include <linux/irq.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c
index ca5de13..904b518 100644
--- a/arch/ppc/platforms/hdpu.c
+++ b/arch/ppc/platforms/hdpu.c
@@ -16,7 +16,6 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/irq.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/platform_device.h>

@@ -604,41 +603,6 @@ static void parse_bootinfo(unsigned long r3,
}
}

-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-static void
-hdpu_ide_request_region(ide_ioreg_t from, unsigned int extent, const char *name)
-{
- request_region(from, extent, name);
- return;
-}
-
-static void hdpu_ide_release_region(ide_ioreg_t from, unsigned int extent)
-{
- release_region(from, extent);
- return;
-}
-
-static void __init
-hdpu_ide_pci_init_hwif_ports(hw_regs_t * hw, ide_ioreg_t data_port,
- ide_ioreg_t ctrl_port, int *irq)
-{
- struct pci_dev *dev;
-
- pci_for_each_dev(dev) {
- if (((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) ||
- ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID)) {
- hw->irq = dev->irq;
-
- if (irq != NULL) {
- *irq = dev->irq;
- }
- }
- }
-
- return;
-}
-#endif
-
void hdpu_heartbeat(void)
{
if (mv64x60_read(&bh, MV64x60_GPP_VALUE) & (1 << 5))
diff --git a/arch/ppc/platforms/lopec.c b/arch/ppc/platforms/lopec.c
index b947c77..1e3aa6e 100644
--- a/arch/ppc/platforms/lopec.c
+++ b/arch/ppc/platforms/lopec.c
@@ -15,7 +15,6 @@
#include <linux/pci_ids.h>
#include <linux/ioport.h>
#include <linux/init.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/initrd.h>
#include <linux/console.h>
@@ -168,85 +167,6 @@ lopec_power_off(void)
lopec_halt();
}

-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-int lopec_ide_ports_known = 0;
-static unsigned long lopec_ide_regbase[MAX_HWIFS];
-static unsigned long lopec_ide_ctl_regbase[MAX_HWIFS];
-static unsigned long lopec_idedma_regbase;
-
-static void
-lopec_ide_probe(void)
-{
- struct pci_dev *dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
- PCI_DEVICE_ID_WINBOND_82C105,
- NULL);
- lopec_ide_ports_known = 1;
-
- if (dev) {
- lopec_ide_regbase[0] = dev->resource[0].start;
- lopec_ide_regbase[1] = dev->resource[2].start;
- lopec_ide_ctl_regbase[0] = dev->resource[1].start;
- lopec_ide_ctl_regbase[1] = dev->resource[3].start;
- lopec_idedma_regbase = dev->resource[4].start;
- pci_dev_put(dev);
- }
-}
-
-static int
-lopec_ide_default_irq(unsigned long base)
-{
- if (lopec_ide_ports_known == 0)
- lopec_ide_probe();
-
- if (base == lopec_ide_regbase[0])
- return 14;
- else if (base == lopec_ide_regbase[1])
- return 15;
- else
- return 0;
-}
-
-static unsigned long
-lopec_ide_default_io_base(int index)
-{
- if (lopec_ide_ports_known == 0)
- lopec_ide_probe();
- return lopec_ide_regbase[index];
-}
-
-static void __init
-lopec_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data,
- unsigned long ctl, int *irq)
-{
- unsigned long reg = data;
- uint alt_status_base;
- int i;
-
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
- hw->io_ports[i] = reg++;
-
- if (data == lopec_ide_regbase[0]) {
- alt_status_base = lopec_ide_ctl_regbase[0] + 2;
- hw->irq = 14;
- } else if (data == lopec_ide_regbase[1]) {
- alt_status_base = lopec_ide_ctl_regbase[1] + 2;
- hw->irq = 15;
- } else {
- alt_status_base = 0;
- hw->irq = 0;
- }
-
- if (ctl)
- hw->io_ports[IDE_CONTROL_OFFSET] = ctl;
- else
- hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base;
-
- if (irq != NULL)
- *irq = hw->irq;
-
-}
-#endif /* BLK_DEV_IDE */
-
static void __init
lopec_init_IRQ(void)
{
@@ -384,11 +304,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;

-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
- ppc_ide_md.default_irq = lopec_ide_default_irq;
- ppc_ide_md.default_io_base = lopec_ide_default_io_base;
- ppc_ide_md.ide_init_hwif = lopec_ide_init_hwif_ports;
-#endif
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress;
#endif
diff --git a/arch/ppc/platforms/mvme5100.c b/arch/ppc/platforms/mvme5100.c
index bb8d4a4..053b54a 100644
--- a/arch/ppc/platforms/mvme5100.c
+++ b/arch/ppc/platforms/mvme5100.c
@@ -17,7 +17,6 @@
#include <linux/initrd.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/kdev_t.h>
#include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/powerpmc250.c b/arch/ppc/platforms/powerpmc250.c
index 4d46650..162dc85 100644
--- a/arch/ppc/platforms/powerpmc250.c
+++ b/arch/ppc/platforms/powerpmc250.c
@@ -25,7 +25,6 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/seq_file.h>
-#include <linux/ide.h>
#include <linux/root_dev.h>

#include <asm/byteorder.h>
diff --git a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c
index 8a1788c..cbcac85 100644
--- a/arch/ppc/platforms/pplus.c
+++ b/arch/ppc/platforms/pplus.c
@@ -19,7 +19,6 @@
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/pci.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>

@@ -668,57 +667,6 @@ static void __init pplus_init_IRQ(void)
ppc_md.progress("init_irq: exit", 0);
}

-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-/*
- * IDE stuff.
- */
-static int pplus_ide_default_irq(unsigned long base)
-{
- switch (base) {
- case 0x1f0:
- return 14;
- case 0x170:
- return 15;
- default:
- return 0;
- }
-}
-
-static unsigned long pplus_ide_default_io_base(int index)
-{
- switch (index) {
- case 0:
- return 0x1f0;
- case 1:
- return 0x170;
- default:
- return 0;
- }
-}
-
-static void __init
-pplus_ide_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
- unsigned long ctrl_port, int *irq)
-{
- unsigned long reg = data_port;
- int i;
-
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
- hw->io_ports[i] = reg;
- reg += 1;
- }
-
- if (ctrl_port)
- hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
- else
- hw->io_ports[IDE_CONTROL_OFFSET] =
- hw->io_ports[IDE_DATA_OFFSET] + 0x206;
-
- if (irq != NULL)
- *irq = pplus_ide_default_irq(data_port);
-}
-#endif
-
#ifdef CONFIG_SMP
/* PowerPlus (MTX) support */
static int __init smp_pplus_probe(void)
@@ -884,12 +832,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.find_end_of_memory = pplus_find_end_of_memory;
ppc_md.setup_io_mappings = pplus_map_io;

-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
- ppc_ide_md.default_irq = pplus_ide_default_irq;
- ppc_ide_md.default_io_base = pplus_ide_default_io_base;
- ppc_ide_md.ide_init_hwif = pplus_ide_init_hwif_ports;
-#endif
-
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress;
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c
index 3844985..465b658 100644
--- a/arch/ppc/platforms/prep_setup.c
+++ b/arch/ppc/platforms/prep_setup.c
@@ -33,7 +33,6 @@
#include <linux/console.h>
#include <linux/timex.h>
#include <linux/pci.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>

@@ -894,38 +893,6 @@ prep_init_IRQ(void)
i8259_init(MPC10X_MAPA_PCI_INTACK_ADDR, 0);
}

-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-/*
- * IDE stuff.
- */
-static int
-prep_ide_default_irq(unsigned long base)
-{
- switch (base) {
- case 0x1f0: return 13;
- case 0x170: return 13;
- case 0x1e8: return 11;
- case 0x168: return 10;
- case 0xfff0: return 14; /* MCP(N)750 ide0 */
- case 0xffe0: return 15; /* MCP(N)750 ide1 */
- default: return 0;
- }
-}
-
-static unsigned long
-prep_ide_default_io_base(int index)
-{
- switch (index) {
- case 0: return 0x1f0;
- case 1: return 0x170;
- case 2: return 0x1e8;
- case 3: return 0x168;
- default:
- return 0;
- }
-}
-#endif
-
#ifdef CONFIG_SMP
/* PReP (MTX) support */
static int __init
@@ -1070,11 +1037,6 @@ prep_init(unsigned long r3, unsigned long r4, unsigned long r5,

ppc_md.setup_io_mappings = prep_map_io;

-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
- ppc_ide_md.default_irq = prep_ide_default_irq;
- ppc_ide_md.default_io_base = prep_ide_default_io_base;
-#endif
-
#ifdef CONFIG_SMP
smp_ops = &prep_smp_ops;
#endif /* CONFIG_SMP */
diff --git a/arch/ppc/platforms/prpmc750.c b/arch/ppc/platforms/prpmc750.c
index fcab513..93bd593 100644
--- a/arch/ppc/platforms/prpmc750.c
+++ b/arch/ppc/platforms/prpmc750.c
@@ -22,7 +22,6 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
-#include <linux/ide.h>
#include <linux/root_dev.h>
#include <linux/slab.h>
#include <linux/serial_reg.h>
diff --git a/arch/ppc/platforms/prpmc800.c b/arch/ppc/platforms/prpmc800.c
index f4ade5c..5bcda7f 100644
--- a/arch/ppc/platforms/prpmc800.c
+++ b/arch/ppc/platforms/prpmc800.c
@@ -20,7 +20,6 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
-#include <linux/ide.h>
#include <linux/root_dev.h>
#include <linux/harrier_defs.h>

diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c
index 44d4398..179b4a9 100644
--- a/arch/ppc/platforms/radstone_ppc7d.c
+++ b/arch/ppc/platforms/radstone_ppc7d.c
@@ -29,7 +29,6 @@
#include <linux/initrd.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
diff --git a/arch/ppc/platforms/residual.c b/arch/ppc/platforms/residual.c
index c991160..18495e7 100644
--- a/arch/ppc/platforms/residual.c
+++ b/arch/ppc/platforms/residual.c
@@ -38,7 +38,6 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/pci.h>
-#include <linux/ide.h>

#include <asm/sections.h>
#include <asm/mmu.h>
diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c
index 3352fae..b4897bd 100644
--- a/arch/ppc/platforms/sandpoint.c
+++ b/arch/ppc/platforms/sandpoint.c
@@ -71,7 +71,6 @@
#include <linux/initrd.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
@@ -559,93 +558,6 @@ sandpoint_show_cpuinfo(struct seq_file *m)
return 0;
}

-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-/*
- * IDE support.
- */
-static int sandpoint_ide_ports_known = 0;
-static unsigned long sandpoint_ide_regbase[MAX_HWIFS];
-static unsigned long sandpoint_ide_ctl_regbase[MAX_HWIFS];
-static unsigned long sandpoint_idedma_regbase;
-
-static void
-sandpoint_ide_probe(void)
-{
- struct pci_dev *pdev = pci_get_device(PCI_VENDOR_ID_WINBOND,
- PCI_DEVICE_ID_WINBOND_82C105, NULL);
-
- if (pdev) {
- sandpoint_ide_regbase[0]=pdev->resource[0].start;
- sandpoint_ide_regbase[1]=pdev->resource[2].start;
- sandpoint_ide_ctl_regbase[0]=pdev->resource[1].start;
- sandpoint_ide_ctl_regbase[1]=pdev->resource[3].start;
- sandpoint_idedma_regbase=pdev->resource[4].start;
- pci_dev_put(pdev);
- }
-
- sandpoint_ide_ports_known = 1;
-}
-
-static int
-sandpoint_ide_default_irq(unsigned long base)
-{
- if (sandpoint_ide_ports_known == 0)
- sandpoint_ide_probe();
-
- if (base == sandpoint_ide_regbase[0])
- return SANDPOINT_IDE_INT0;
- else if (base == sandpoint_ide_regbase[1])
- return SANDPOINT_IDE_INT1;
- else
- return 0;
-}
-
-static unsigned long
-sandpoint_ide_default_io_base(int index)
-{
- if (sandpoint_ide_ports_known == 0)
- sandpoint_ide_probe();
-
- return sandpoint_ide_regbase[index];
-}
-
-static void __init
-sandpoint_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
- unsigned long ctrl_port, int *irq)
-{
- unsigned long reg = data_port;
- uint alt_status_base;
- int i;
-
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
- hw->io_ports[i] = reg++;
- }
-
- if (data_port == sandpoint_ide_regbase[0]) {
- alt_status_base = sandpoint_ide_ctl_regbase[0] + 2;
- hw->irq = 14;
- }
- else if (data_port == sandpoint_ide_regbase[1]) {
- alt_status_base = sandpoint_ide_ctl_regbase[1] + 2;
- hw->irq = 15;
- }
- else {
- alt_status_base = 0;
- hw->irq = 0;
- }
-
- if (ctrl_port) {
- hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
- } else {
- hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base;
- }
-
- if (irq != NULL) {
- *irq = hw->irq;
- }
-}
-#endif
-
/*
* Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
*/
@@ -736,10 +648,4 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress;
#endif
-
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
- ppc_ide_md.default_irq = sandpoint_ide_default_irq;
- ppc_ide_md.default_io_base = sandpoint_ide_default_io_base;
- ppc_ide_md.ide_init_hwif = sandpoint_ide_init_hwif_ports;
-#endif
}
diff --git a/arch/ppc/platforms/sandpoint.h b/arch/ppc/platforms/sandpoint.h
index 3b64e64..ed83759 100644
--- a/arch/ppc/platforms/sandpoint.h
+++ b/arch/ppc/platforms/sandpoint.h
@@ -28,9 +28,6 @@
*/
#define SANDPOINT_IDE_INT0 23 /* EPIC 7 */
#define SANDPOINT_IDE_INT1 24 /* EPIC 8 */
-#else
-#define SANDPOINT_IDE_INT0 14 /* 8259 Test */
-#define SANDPOINT_IDE_INT1 15 /* 8259 Test */
#endif

/*
diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c
index f4de50b..a344134 100644
--- a/arch/ppc/platforms/spruce.c
+++ b/arch/ppc/platforms/spruce.c
@@ -22,7 +22,6 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
-#include <linux/ide.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
#include <linux/tty.h>
diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
index 9caf850..19749e9 100644
--- a/arch/ppc/syslib/m8xx_setup.c
+++ b/arch/ppc/syslib/m8xx_setup.c
@@ -87,8 +87,6 @@ void m8xx_calibrate_decr(void);

unsigned char __res[sizeof(bd_t)];

-extern void m8xx_ide_init(void);
-
extern unsigned long find_available_memory(void);
extern void m8xx_cpm_reset(void);
extern void m8xx_wdt_handler_install(bd_t *bp);
@@ -474,8 +472,4 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,

ppc_md.find_end_of_memory = m8xx_find_end_of_memory;
ppc_md.setup_io_mappings = m8xx_map_io;
-
-#if defined(CONFIG_BLK_DEV_MPC8xx_IDE)
- m8xx_ide_init();
-#endif
}
diff --git a/arch/ppc/syslib/ppc4xx_setup.c b/arch/ppc/syslib/ppc4xx_setup.c
index debe14c..353d746 100644
--- a/arch/ppc/syslib/ppc4xx_setup.c
+++ b/arch/ppc/syslib/ppc4xx_setup.c
@@ -24,7 +24,6 @@
#include <linux/pci.h>
#include <linux/rtc.h>
#include <linux/console.h>
-#include <linux/ide.h>
#include <linux/serial_reg.h>
#include <linux/seq_file.h>

@@ -189,24 +188,6 @@ ppc4xx_calibrate_decr(void)
mtspr(SPRN_PIT, tb_ticks_per_jiffy);
}

-/*
- * IDE stuff.
- * should be generic for every IDE PCI chipset
- */
-#if defined(CONFIG_PCI) && defined(CONFIG_IDE)
-static void
-ppc4xx_ide_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
- unsigned long ctrl_port, int *irq)
-{
- int i;
-
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; ++i)
- hw->io_ports[i] = data_port + i - IDE_DATA_OFFSET;
-
- hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
-}
-#endif /* defined(CONFIG_PCI) && defined(CONFIG_IDE) */
-
TODC_ALLOC();

/*
@@ -271,10 +252,6 @@ ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress;
#endif
-
-#if defined(CONFIG_PCI) && defined(CONFIG_IDE)
- ppc_ide_md.ide_init_hwif = ppc4xx_ide_init_hwif_ports;
-#endif /* defined(CONFIG_PCI) && defined(CONFIG_IDE) */
}

/* Called from machine_check_exception */
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index b733732..c70d0b6 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -624,7 +624,6 @@ static int compat_blkdev_driver_ioctl(struct inode *inode, struct file *file,
case HDIO_GET_IDENTITY:
case HDIO_DRIVE_TASK:
case HDIO_DRIVE_CMD:
- case HDIO_SCAN_HWIF:
/* 0x330 is reserved -- it used to be HDIO_GETGEO_BIG */
case 0x330:
/* 0x02 -- Floppy ioctls */
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index eed6d8e..8753203 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -122,24 +122,6 @@ config BLK_DEV_IDE_SATA

If unsure, say N.

-config BLK_DEV_HD_IDE
- bool "Use old disk-only driver on primary interface"
- depends on (X86 || SH_MPC1211)
- ---help---
- There are two drivers for MFM/RLL/IDE disks. Most people use just
- the new enhanced driver by itself. This option however installs the
- old hard disk driver to control the primary IDE/disk interface in
- the system, leaving the new enhanced IDE driver to take care of only
- the 2nd/3rd/4th IDE interfaces. Doing this will prevent you from
- having an IDE/ATAPI CD-ROM or tape drive connected to the primary
- IDE interface. Choosing this option may be useful for older systems
- which have MFM/RLL/ESDI controller+drives at the primary port
- address (0x1f0), along with IDE drives at the secondary/3rd/4th port
- addresses.
-
- Normally, just say N here; you will then use the new driver for all
- 4 interfaces.
-
config BLK_DEV_IDEDISK
tristate "Include IDE/ATA-2 DISK support"
---help---
@@ -325,6 +307,7 @@ comment "IDE chipset support/bugfixes"

config IDE_GENERIC
tristate "generic/default IDE chipset support"
+ depends on ALPHA || X86 || IA64 || M32R || MIPS || PPC32
help
If unsure, say N.

@@ -416,12 +399,6 @@ config BLK_DEV_OFFBOARD
This can improve the usability of some boot managers such as lilo
when booting from a drive on an off-board controller.

- If you say Y here, and you actually want to reverse the device scan
- order as explained above, you also need to issue the kernel command
- line option "ide=reverse". (Try "man bootparam" or see the
- documentation of your boot loader (lilo or loadlin) about how to
- pass options to the kernel at boot time.)
-
Note that, if you do this, the order of the hd* devices will be
rearranged which may require modification of fstab and other files.

@@ -615,8 +592,7 @@ config BLK_DEV_HPT366
reference to device 0x80. The other solution is to say Y to "Boot
off-board chipsets first support" (CONFIG_BLK_DEV_OFFBOARD) unless
your mother board has the chipset natively mounted. Regardless one
- should use the fore mentioned option and call at LILO or include
- "ide=reverse" in LILO's append-line.
+ should use the fore mentioned option and call at LILO.

This driver requires dynamic tuning of the chipset during the
ide-probe at boot. It is reported to support DVD II drives, by the
@@ -1049,7 +1025,7 @@ config IDE_EXT_DIRECT
endchoice

# no isa -> no vlb
-if ISA
+if ISA && (ALPHA || X86 || MIPS)

comment "Other IDE chipsets support"
comment "Note: most of these also require special kernel boot parameters"
@@ -1060,8 +1036,8 @@ config BLK_DEV_4DRIVES
Certain older chipsets, including the Tekram 690CD, use a single set
of I/O ports at 0x1f0 to control up to four drives, instead of the
customary two drives per port. Support for this can be enabled at
- runtime using the "ide0=four" kernel boot parameter if you say Y
- here.
+ runtime using the "ide-4drives.probe" kernel boot parameter if you
+ say Y here.

config BLK_DEV_ALI14XX
tristate "ALI M14xx support"
@@ -1114,14 +1090,10 @@ config BLK_DEV_IDEDMA
def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA

-config IDE_ARCH_OBSOLETE_INIT
- def_bool ALPHA || (ARM && !ARCH_L7200) || BLACKFIN || X86 || IA64 || M32R || MIPS || PARISC || PPC || (SUPERH64 && BLK_DEV_IDEPCI) || SPARC
-
endif

config BLK_DEV_HD_ONLY
bool "Old hard disk (MFM/RLL/IDE) driver"
- depends on BLK_DEV_IDE=n
help
There are two drivers for MFM/RLL/IDE hard disks. Most people use
the newer enhanced driver, but this old one is still around for two
@@ -1133,12 +1105,16 @@ config BLK_DEV_HD_ONLY
for systems with only older MFM/RLL/ESDI drives. Choosing the old
driver can save 13 KB or so of kernel memory.

+ If you want to use this driver together with the new one you have
+ to use "hda=noprobe hdb=noprobe" kernel parameters to prevent the new
+ driver from probing the primary interface.
+
If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver
instead of this one. For more detailed information, read the
Disk-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.

config BLK_DEV_HD
- def_bool BLK_DEV_HD_IDE || BLK_DEV_HD_ONLY
+ def_bool BLK_DEV_HD_ONLY

endif # IDE
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index a4a4323..571544c 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -36,9 +36,9 @@ ifeq ($(CONFIG_BLK_DEV_CMD640), y)
endif

obj-$(CONFIG_BLK_DEV_IDE) += cris/ ppc/
-obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
obj-$(CONFIG_IDE_H8300) += h8300/
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
+obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o

ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o

diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c
index 161d30c..ec46c44 100644
--- a/drivers/ide/arm/bast-ide.c
+++ b/drivers/ide/arm/bast-ide.c
@@ -41,15 +41,15 @@ static int __init bastide_register(unsigned int base, unsigned int aux, int irq)
hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20);
hw.irq = irq;

- hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]);
+ hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif == NULL)
goto out;

i = hwif->index;

if (hwif->present)
- ide_unregister(i, 0, 0);
- else if (!hwif->hold)
+ ide_unregister(i);
+ else
ide_init_port_data(hwif, i);

ide_init_port_hw(hwif, &hw);
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index 8e1f6bd..474162c 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -378,15 +378,15 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
hw.irq = irq->start;
hw.chipset = ide_palm3710;

- hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]);
+ hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif == NULL)
goto out;

i = hwif->index;

if (hwif->present)
- ide_unregister(i, 0, 0);
- else if (!hwif->hold)
+ ide_unregister(i);
+ else
ide_init_port_data(hwif, i);

ide_init_port_hw(hwif, &hw);
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
index efba00d..b30adcf 100644
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -76,7 +76,7 @@ static void __devexit rapide_remove(struct expansion_card *ec)

ecard_set_drvdata(ec, NULL);

- ide_unregister(hwif->index, 0, 0);
+ ide_unregister(hwif->index);

ecard_release_resources(ec);
}
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index c8ffbaf..31266d2 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -228,7 +228,10 @@ cris_ide_fill_descriptor(cris_dma_descr_type *d, void* buf, unsigned int len, in
static void
cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int dir,int type,int len)
{
- reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, IDE_DATA_REG);
+ ide_hwif_t *hwif = drive->hwif;
+
+ reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int,
+ hwif->io_ports[IDE_DATA_OFFSET]);
reg_ata_rw_trf_cnt trf_cnt = {0};

mycontext.saved_data = (dma_descr_data*)virt_to_phys(d);
@@ -264,8 +267,12 @@ cris_ide_wait_dma(int dir)

static int cris_dma_test_irq(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
int intr = REG_RD_INT(ata, regi_ata, r_intr);
- reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, IDE_DATA_REG);
+
+ reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int,
+ hwif->io_ports[IDE_DATA_OFFSET]);
+
return intr & (1 << ctrl2.sel) ? 1 : 0;
}

@@ -523,7 +530,8 @@ static void cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int d
IO_STATE(R_ATA_CTRL_DATA, handsh, dma);
*R_ATA_CTRL_DATA =
cmd |
- IO_FIELD(R_ATA_CTRL_DATA, data, IDE_DATA_REG) |
+ IO_FIELD(R_ATA_CTRL_DATA, data,
+ drive->hwif->io_ports[IDE_DATA_OFFSET]) |
IO_STATE(R_ATA_CTRL_DATA, src_dst, dma) |
IO_STATE(R_ATA_CTRL_DATA, multi, on) |
IO_STATE(R_ATA_CTRL_DATA, dma_size, word);
@@ -541,7 +549,9 @@ cris_ide_wait_dma(int dir)
static int cris_dma_test_irq(ide_drive_t *drive)
{
int intr = *R_IRQ_MASK0_RD;
- int bus = IO_EXTRACT(R_ATA_CTRL_DATA, sel, IDE_DATA_REG);
+ int bus = IO_EXTRACT(R_ATA_CTRL_DATA, sel,
+ drive->hwif->io_ports[IDE_DATA_OFFSET]);
+
return intr & (1 << (bus + IO_BITNR(R_IRQ_MASK0_RD, ata_irq0))) ? 1 : 0;
}

diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index e07b189..0f6fb6b 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -710,6 +710,8 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif)
for (i = 0; i < MAX_DRIVES; i++) {
drive = &hwif->drives[i];

+ memset(drive->acpidata, 0, sizeof(*drive->acpidata));
+
if (!drive->present)
continue;

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index c8d0e87..3960002 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -542,7 +542,8 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,

/* packet command */
spin_lock_irqsave(&ide_lock, flags);
- hwif->OUTBSYNC(drive, WIN_PACKETCMD, IDE_COMMAND_REG);
+ hwif->OUTBSYNC(drive, WIN_PACKETCMD,
+ hwif->io_ports[IDE_COMMAND_OFFSET]);
ndelay(400);
spin_unlock_irqrestore(&ide_lock, flags);

@@ -992,6 +993,7 @@ static int cdrom_newpc_intr_dummy_cb(struct request *rq)

static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
struct cdrom_info *info = drive->driver_data;
struct request *rq = HWGROUP(drive)->rq;
xfer_func_t *xferfunc;
@@ -1032,9 +1034,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
/*
* ok we fall to pio :/
*/
- ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3;
- lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG);
- highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
+ ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]) & 0x3;
+ lowcyl = hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]);
+ highcyl = hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]);

len = lowcyl + (256 * highcyl);

diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index faf22d7..5f133df 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -78,40 +78,6 @@
*/
#define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES)

-typedef struct idefloppy_packet_command_s {
- u8 c[12]; /* Actual packet bytes */
- int retries; /* On each retry, we increment
- retries */
- int error; /* Error code */
- int request_transfer; /* Bytes to transfer */
- int actually_transferred; /* Bytes actually transferred */
- int buffer_size; /* Size of our data buffer */
- int b_count; /* Missing/Available data on
- the current buffer */
- struct request *rq; /* The corresponding request */
- u8 *buffer; /* Data buffer */
- u8 *current_position; /* Pointer into above buffer */
- void (*callback) (ide_drive_t *); /* Called when this packet
- command is completed */
- u8 pc_buffer[IDEFLOPPY_PC_BUFFER_SIZE]; /* Temporary buffer */
- unsigned long flags; /* Status/Action bit flags: long
- for set_bit */
-} idefloppy_pc_t;
-
-/* Packet command flag bits. */
-enum {
- /* 1 when we prefer to use DMA if possible */
- PC_FLAG_DMA_RECOMMENDED = (1 << 0),
- /* 1 while DMA in progress */
- PC_FLAG_DMA_IN_PROGRESS = (1 << 1),
- /* 1 when encountered problem during DMA */
- PC_FLAG_DMA_ERROR = (1 << 2),
- /* Data direction */
- PC_FLAG_WRITING = (1 << 3),
- /* Suppress error reporting */
- PC_FLAG_SUPPRESS_ERROR = (1 << 4),
-};
-
/* format capacities descriptor codes */
#define CAPACITY_INVALID 0x00
#define CAPACITY_UNFORMATTED 0x01
@@ -131,11 +97,11 @@ typedef struct ide_floppy_obj {
unsigned int openers; /* protected by BKL for now */

/* Current packet command */
- idefloppy_pc_t *pc;
+ struct ide_atapi_pc *pc;
/* Last failed packet command */
- idefloppy_pc_t *failed_pc;
+ struct ide_atapi_pc *failed_pc;
/* Packet command stack */
- idefloppy_pc_t pc_stack[IDEFLOPPY_PC_STACK];
+ struct ide_atapi_pc pc_stack[IDEFLOPPY_PC_STACK];
/* Next free packet command storage space */
int pc_stack_index;
struct request rq_stack[IDEFLOPPY_PC_STACK];
@@ -195,32 +161,6 @@ enum {
#define IDEFLOPPY_ERROR_GENERAL 101

/*
- * The following is used to format the general configuration word of the
- * ATAPI IDENTIFY DEVICE command.
- */
-struct idefloppy_id_gcw {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned packet_size :2; /* Packet Size */
- unsigned reserved234 :3; /* Reserved */
- unsigned drq_type :2; /* Command packet DRQ type */
- unsigned removable :1; /* Removable media */
- unsigned device_type :5; /* Device type */
- unsigned reserved13 :1; /* Reserved */
- unsigned protocol :2; /* Protocol type */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned protocol :2; /* Protocol type */
- unsigned reserved13 :1; /* Reserved */
- unsigned device_type :5; /* Device type */
- unsigned removable :1; /* Removable media */
- unsigned drq_type :2; /* Command packet DRQ type */
- unsigned reserved234 :3; /* Reserved */
- unsigned packet_size :2; /* Packet Size */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
-};
-
-/*
* Pages of the SELECT SENSE / MODE SENSE packet commands.
* See SFF-8070i spec.
*/
@@ -256,27 +196,10 @@ static void ide_floppy_put(struct ide_floppy_obj *floppy)
}

/*
- * Too bad. The drive wants to send us data which we are not ready to accept.
- * Just throw it away.
- */
-static void idefloppy_discard_data(ide_drive_t *drive, unsigned int bcount)
-{
- while (bcount--)
- (void) HWIF(drive)->INB(IDE_DATA_REG);
-}
-
-static void idefloppy_write_zeros(ide_drive_t *drive, unsigned int bcount)
-{
- while (bcount--)
- HWIF(drive)->OUTB(0, IDE_DATA_REG);
-}
-
-
-/*
* Used to finish servicing a request. For read/write requests, we will call
* ide_end_request to pass to the next buffer.
*/
-static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs)
+static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct request *rq = HWGROUP(drive)->rq;
@@ -305,7 +228,7 @@ static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs)
return 0;
}

-static void ide_floppy_io_buffers(ide_drive_t *drive, idefloppy_pc_t *pc,
+static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
unsigned int bcount, int direction)
{
struct request *rq = pc->rq;
@@ -333,26 +256,26 @@ static void ide_floppy_io_buffers(ide_drive_t *drive, idefloppy_pc_t *pc,
done += count;
}

- idefloppy_do_end_request(drive, 1, done >> 9);
+ idefloppy_end_request(drive, 1, done >> 9);

if (bcount) {
printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n",
drive->name, __func__, bcount);
if (direction)
- idefloppy_write_zeros(drive, bcount);
+ ide_atapi_write_zeros(drive, bcount);
else
- idefloppy_discard_data(drive, bcount);
-
+ ide_atapi_discard_data(drive, bcount);
}
}

-static void idefloppy_update_buffers(ide_drive_t *drive, idefloppy_pc_t *pc)
+static void idefloppy_update_buffers(ide_drive_t *drive,
+ struct ide_atapi_pc *pc)
{
struct request *rq = pc->rq;
struct bio *bio = rq->bio;

while ((bio = rq->bio) != NULL)
- idefloppy_do_end_request(drive, 1, 0);
+ idefloppy_end_request(drive, 1, 0);
}

/*
@@ -360,7 +283,7 @@ static void idefloppy_update_buffers(ide_drive_t *drive, idefloppy_pc_t *pc)
* the current request so that it will be processed immediately, on the next
* pass through the driver.
*/
-static void idefloppy_queue_pc_head(ide_drive_t *drive, idefloppy_pc_t *pc,
+static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
struct request *rq)
{
struct ide_floppy_obj *floppy = drive->driver_data;
@@ -372,7 +295,7 @@ static void idefloppy_queue_pc_head(ide_drive_t *drive, idefloppy_pc_t *pc,
(void) ide_do_drive_cmd(drive, rq, ide_preempt);
}

-static idefloppy_pc_t *idefloppy_next_pc_storage(ide_drive_t *drive)
+static struct ide_atapi_pc *idefloppy_next_pc_storage(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;

@@ -393,7 +316,7 @@ static struct request *idefloppy_next_rq_storage(ide_drive_t *drive)
static void idefloppy_request_sense_callback(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- u8 *buf = floppy->pc->buffer;
+ u8 *buf = floppy->pc->buf;

debug_log("Reached %s\n", __func__);

@@ -418,11 +341,11 @@ static void idefloppy_request_sense_callback(ide_drive_t *drive)
floppy->ascq);


- idefloppy_do_end_request(drive, 1, 0);
+ idefloppy_end_request(drive, 1, 0);
} else {
printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting"
" request!\n");
- idefloppy_do_end_request(drive, 0, 0);
+ idefloppy_end_request(drive, 0, 0);
}
}

@@ -433,27 +356,27 @@ static void idefloppy_pc_callback(ide_drive_t *drive)

debug_log("Reached %s\n", __func__);

- idefloppy_do_end_request(drive, floppy->pc->error ? 0 : 1, 0);
+ idefloppy_end_request(drive, floppy->pc->error ? 0 : 1, 0);
}

-static void idefloppy_init_pc(idefloppy_pc_t *pc)
+static void idefloppy_init_pc(struct ide_atapi_pc *pc)
{
memset(pc->c, 0, 12);
pc->retries = 0;
pc->flags = 0;
- pc->request_transfer = 0;
- pc->buffer = pc->pc_buffer;
- pc->buffer_size = IDEFLOPPY_PC_BUFFER_SIZE;
- pc->callback = &idefloppy_pc_callback;
+ pc->req_xfer = 0;
+ pc->buf = pc->pc_buf;
+ pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE;
+ pc->idefloppy_callback = &idefloppy_pc_callback;
}

-static void idefloppy_create_request_sense_cmd(idefloppy_pc_t *pc)
+static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
{
idefloppy_init_pc(pc);
pc->c[0] = GPCMD_REQUEST_SENSE;
pc->c[4] = 255;
- pc->request_transfer = 18;
- pc->callback = &idefloppy_request_sense_callback;
+ pc->req_xfer = 18;
+ pc->idefloppy_callback = &idefloppy_request_sense_callback;
}

/*
@@ -462,7 +385,7 @@ static void idefloppy_create_request_sense_cmd(idefloppy_pc_t *pc)
*/
static void idefloppy_retry_pc(ide_drive_t *drive)
{
- idefloppy_pc_t *pc;
+ struct ide_atapi_pc *pc;
struct request *rq;

(void)ide_read_error(drive);
@@ -477,7 +400,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
- idefloppy_pc_t *pc = floppy->pc;
+ struct ide_atapi_pc *pc = floppy->pc;
struct request *rq = pc->rq;
xfer_func_t *xferfunc;
unsigned int temp;
@@ -494,7 +417,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
rq_data_dir(rq) ? "write" : "read");
pc->flags |= PC_FLAG_DMA_ERROR;
} else {
- pc->actually_transferred = pc->request_transfer;
+ pc->xferred = pc->req_xfer;
idefloppy_update_buffers(drive, pc);
}
debug_log("DMA finished\n");
@@ -506,7 +429,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
/* No more interrupts */
if ((stat & DRQ_STAT) == 0) {
debug_log("Packet command completed, %d bytes transferred\n",
- pc->actually_transferred);
+ pc->xferred);
pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;

local_irq_enable_in_hardirq();
@@ -529,7 +452,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
if (floppy->failed_pc == pc)
floppy->failed_pc = NULL;
/* Command finished - Call the callback function */
- pc->callback(drive);
+ pc->idefloppy_callback(drive);
return ide_stopped;
}

@@ -542,10 +465,10 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
}

/* Get the number of bytes to transfer */
- bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) |
- hwif->INB(IDE_BCOUNTL_REG);
+ bcount = (hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]) << 8) |
+ hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]);
/* on this interrupt */
- ireason = hwif->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]);

if (ireason & CD) {
printk(KERN_ERR "ide-floppy: CoD != 0 in %s\n", __func__);
@@ -561,13 +484,13 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
}
if (!(pc->flags & PC_FLAG_WRITING)) {
/* Reading - Check that we have enough space */
- temp = pc->actually_transferred + bcount;
- if (temp > pc->request_transfer) {
- if (temp > pc->buffer_size) {
+ temp = pc->xferred + bcount;
+ if (temp > pc->req_xfer) {
+ if (temp > pc->buf_size) {
printk(KERN_ERR "ide-floppy: The floppy wants "
"to send us more data than expected "
"- discarding data\n");
- idefloppy_discard_data(drive, bcount);
+ ide_atapi_discard_data(drive, bcount);

ide_set_handler(drive,
&idefloppy_pc_intr,
@@ -584,15 +507,15 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
else
xferfunc = hwif->atapi_input_bytes;

- if (pc->buffer)
- xferfunc(drive, pc->current_position, bcount);
+ if (pc->buf)
+ xferfunc(drive, pc->cur_pos, bcount);
else
ide_floppy_io_buffers(drive, pc, bcount,
!!(pc->flags & PC_FLAG_WRITING));

/* Update the current position */
- pc->actually_transferred += bcount;
- pc->current_position += bcount;
+ pc->xferred += bcount;
+ pc->cur_pos += bcount;

/* And set the interrupt handler again */
ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
@@ -606,6 +529,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
*/
static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
ide_startstop_t startstop;
idefloppy_floppy_t *floppy = drive->driver_data;
u8 ireason;
@@ -615,7 +539,7 @@ static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive)
"initiated yet DRQ isn't asserted\n");
return startstop;
}
- ireason = drive->hwif->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]);
if ((ireason & CD) == 0 || (ireason & IO)) {
printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while "
"issuing a packet command\n");
@@ -652,6 +576,7 @@ static int idefloppy_transfer_pc2(ide_drive_t *drive)

static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
idefloppy_floppy_t *floppy = drive->driver_data;
ide_startstop_t startstop;
u8 ireason;
@@ -661,7 +586,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive)
"initiated yet DRQ isn't asserted\n");
return startstop;
}
- ireason = drive->hwif->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]);
if ((ireason & CD) == 0 || (ireason & IO)) {
printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) "
"while issuing a packet command\n");
@@ -682,7 +607,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive)
}

static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
- idefloppy_pc_t *pc)
+ struct ide_atapi_pc *pc)
{
/* supress error messages resulting from Medium not present */
if (floppy->sense_key == 0x02 &&
@@ -698,7 +623,7 @@ static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
}

static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
- idefloppy_pc_t *pc)
+ struct ide_atapi_pc *pc)
{
idefloppy_floppy_t *floppy = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
@@ -719,7 +644,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pc->error = IDEFLOPPY_ERROR_GENERAL;

floppy->failed_pc = NULL;
- pc->callback(drive);
+ pc->idefloppy_callback(drive);
return ide_stopped;
}

@@ -727,9 +652,9 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,

pc->retries++;
/* We haven't transferred any data yet */
- pc->actually_transferred = 0;
- pc->current_position = pc->buffer;
- bcount = min(pc->request_transfer, 63 * 1024);
+ pc->xferred = 0;
+ pc->cur_pos = pc->buf;
+ bcount = min(pc->req_xfer, 63 * 1024);

if (pc->flags & PC_FLAG_DMA_ERROR) {
pc->flags &= ~PC_FLAG_DMA_ERROR;
@@ -757,7 +682,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
/* immediate */
pkt_xfer_routine = &idefloppy_transfer_pc;
}
-
+
if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) {
/* Issue the packet command */
ide_execute_command(drive, WIN_PACKETCMD,
@@ -767,7 +692,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
return ide_started;
} else {
/* Issue the packet command */
- HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG);
+ hwif->OUTB(WIN_PACKETCMD, hwif->io_ports[IDE_COMMAND_OFFSET]);
return (*pkt_xfer_routine) (drive);
}
}
@@ -776,11 +701,11 @@ static void idefloppy_rw_callback(ide_drive_t *drive)
{
debug_log("Reached %s\n", __func__);

- idefloppy_do_end_request(drive, 1, 0);
+ idefloppy_end_request(drive, 1, 0);
return;
}

-static void idefloppy_create_prevent_cmd(idefloppy_pc_t *pc, int prevent)
+static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent)
{
debug_log("creating prevent removal command, prevent = %d\n", prevent);

@@ -789,39 +714,39 @@ static void idefloppy_create_prevent_cmd(idefloppy_pc_t *pc, int prevent)
pc->c[4] = prevent;
}

-static void idefloppy_create_read_capacity_cmd(idefloppy_pc_t *pc)
+static void idefloppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
{
idefloppy_init_pc(pc);
pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
pc->c[7] = 255;
pc->c[8] = 255;
- pc->request_transfer = 255;
+ pc->req_xfer = 255;
}

-static void idefloppy_create_format_unit_cmd(idefloppy_pc_t *pc, int b, int l,
- int flags)
+static void idefloppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
+ int l, int flags)
{
idefloppy_init_pc(pc);
pc->c[0] = GPCMD_FORMAT_UNIT;
pc->c[1] = 0x17;

- memset(pc->buffer, 0, 12);
- pc->buffer[1] = 0xA2;
+ memset(pc->buf, 0, 12);
+ pc->buf[1] = 0xA2;
/* Default format list header, u8 1: FOV/DCRT/IMM bits set */

if (flags & 1) /* Verify bit on... */
- pc->buffer[1] ^= 0x20; /* ... turn off DCRT bit */
- pc->buffer[3] = 8;
+ pc->buf[1] ^= 0x20; /* ... turn off DCRT bit */
+ pc->buf[3] = 8;

- put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buffer[4]));
- put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buffer[8]));
- pc->buffer_size = 12;
+ put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4]));
+ put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8]));
+ pc->buf_size = 12;
pc->flags |= PC_FLAG_WRITING;
}

/* A mode sense command is used to "sense" floppy parameters. */
-static void idefloppy_create_mode_sense_cmd(idefloppy_pc_t *pc, u8 page_code,
- u8 type)
+static void idefloppy_create_mode_sense_cmd(struct ide_atapi_pc *pc,
+ u8 page_code, u8 type)
{
u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */

@@ -842,24 +767,24 @@ static void idefloppy_create_mode_sense_cmd(idefloppy_pc_t *pc, u8 page_code,
"in create_mode_sense_cmd\n");
}
put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
- pc->request_transfer = length;
+ pc->req_xfer = length;
}

-static void idefloppy_create_start_stop_cmd(idefloppy_pc_t *pc, int start)
+static void idefloppy_create_start_stop_cmd(struct ide_atapi_pc *pc, int start)
{
idefloppy_init_pc(pc);
pc->c[0] = GPCMD_START_STOP_UNIT;
pc->c[4] = start;
}

-static void idefloppy_create_test_unit_ready_cmd(idefloppy_pc_t *pc)
+static void idefloppy_create_test_unit_ready_cmd(struct ide_atapi_pc *pc)
{
idefloppy_init_pc(pc);
pc->c[0] = GPCMD_TEST_UNIT_READY;
}

static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
- idefloppy_pc_t *pc, struct request *rq,
+ struct ide_atapi_pc *pc, struct request *rq,
unsigned long sector)
{
int block = sector / floppy->bs_factor;
@@ -874,41 +799,41 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);

- pc->callback = &idefloppy_rw_callback;
+ pc->idefloppy_callback = &idefloppy_rw_callback;
pc->rq = rq;
pc->b_count = cmd == READ ? 0 : rq->bio->bi_size;
if (rq->cmd_flags & REQ_RW)
pc->flags |= PC_FLAG_WRITING;
- pc->buffer = NULL;
- pc->request_transfer = pc->buffer_size = blocks * floppy->block_size;
+ pc->buf = NULL;
+ pc->req_xfer = pc->buf_size = blocks * floppy->block_size;
pc->flags |= PC_FLAG_DMA_RECOMMENDED;
}

static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
- idefloppy_pc_t *pc, struct request *rq)
+ struct ide_atapi_pc *pc, struct request *rq)
{
idefloppy_init_pc(pc);
- pc->callback = &idefloppy_rw_callback;
+ pc->idefloppy_callback = &idefloppy_rw_callback;
memcpy(pc->c, rq->cmd, sizeof(pc->c));
pc->rq = rq;
pc->b_count = rq->data_len;
if (rq->data_len && rq_data_dir(rq) == WRITE)
pc->flags |= PC_FLAG_WRITING;
- pc->buffer = rq->data;
+ pc->buf = rq->data;
if (rq->bio)
pc->flags |= PC_FLAG_DMA_RECOMMENDED;
/*
* possibly problematic, doesn't look like ide-floppy correctly
* handled scattered requests if dma fails...
*/
- pc->request_transfer = pc->buffer_size = rq->data_len;
+ pc->req_xfer = pc->buf_size = rq->data_len;
}

static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
struct request *rq, sector_t block_s)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- idefloppy_pc_t *pc;
+ struct ide_atapi_pc *pc;
unsigned long block = (unsigned long)block_s;

debug_log("dev: %s, cmd_type: %x, errors: %d\n",
@@ -924,7 +849,7 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
else
printk(KERN_ERR "ide-floppy: %s: I/O error\n",
drive->name);
- idefloppy_do_end_request(drive, 0, 0);
+ idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}
if (blk_fs_request(rq)) {
@@ -932,20 +857,20 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
(rq->nr_sectors % floppy->bs_factor)) {
printk(KERN_ERR "%s: unsupported r/w request size\n",
drive->name);
- idefloppy_do_end_request(drive, 0, 0);
+ idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}
pc = idefloppy_next_pc_storage(drive);
idefloppy_create_rw_cmd(floppy, pc, rq, block);
} else if (blk_special_request(rq)) {
- pc = (idefloppy_pc_t *) rq->buffer;
+ pc = (struct ide_atapi_pc *) rq->buffer;
} else if (blk_pc_request(rq)) {
pc = idefloppy_next_pc_storage(drive);
idefloppy_blockpc_cmd(floppy, pc, rq);
} else {
blk_dump_rq_flags(rq,
"ide-floppy: unsupported command in queue");
- idefloppy_do_end_request(drive, 0, 0);
+ idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}

@@ -957,7 +882,7 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
* Add a special packet command request to the tail of the request queue,
* and wait for it to be serviced.
*/
-static int idefloppy_queue_pc_tail(ide_drive_t *drive, idefloppy_pc_t *pc)
+static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
struct ide_floppy_obj *floppy = drive->driver_data;
struct request rq;
@@ -977,7 +902,7 @@ static int idefloppy_queue_pc_tail(ide_drive_t *drive, idefloppy_pc_t *pc)
static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;
u8 *page;
int capacity, lba_capacity;
u16 transfer_rate, sector_size, cyls, rpm;
@@ -991,16 +916,16 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
" parameters\n");
return 1;
}
- floppy->wp = !!(pc.buffer[3] & 0x80);
+ floppy->wp = !!(pc.buf[3] & 0x80);
set_disk_ro(floppy->disk, floppy->wp);
- page = &pc.buffer[8];
+ page = &pc.buf[8];

- transfer_rate = be16_to_cpu(*(u16 *)&pc.buffer[8 + 2]);
- sector_size = be16_to_cpu(*(u16 *)&pc.buffer[8 + 6]);
- cyls = be16_to_cpu(*(u16 *)&pc.buffer[8 + 8]);
- rpm = be16_to_cpu(*(u16 *)&pc.buffer[8 + 28]);
- heads = pc.buffer[8 + 4];
- sectors = pc.buffer[8 + 5];
+ transfer_rate = be16_to_cpu(*(u16 *)&pc.buf[8 + 2]);
+ sector_size = be16_to_cpu(*(u16 *)&pc.buf[8 + 6]);
+ cyls = be16_to_cpu(*(u16 *)&pc.buf[8 + 8]);
+ rpm = be16_to_cpu(*(u16 *)&pc.buf[8 + 28]);
+ heads = pc.buf[8 + 4];
+ sectors = pc.buf[8 + 5];

capacity = cyls * heads * sectors * sector_size;

@@ -1029,7 +954,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
static int idefloppy_get_sfrp_bit(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;

floppy->srfp = 0;
idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE,
@@ -1039,7 +964,7 @@ static int idefloppy_get_sfrp_bit(ide_drive_t *drive)
if (idefloppy_queue_pc_tail(drive, &pc))
return 1;

- floppy->srfp = pc.buffer[8 + 2] & 0x40;
+ floppy->srfp = pc.buf[8 + 2] & 0x40;
return (0);
}

@@ -1050,7 +975,7 @@ static int idefloppy_get_sfrp_bit(ide_drive_t *drive)
static int ide_floppy_get_capacity(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;
u8 *cap_desc;
u8 header_len, desc_cnt;
int i, rc = 1, blocks, length;
@@ -1066,15 +991,15 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
return 1;
}
- header_len = pc.buffer[3];
- cap_desc = &pc.buffer[4];
+ header_len = pc.buf[3];
+ cap_desc = &pc.buf[4];
desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */

for (i = 0; i < desc_cnt; i++) {
unsigned int desc_start = 4 + i*8;

- blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]);
- length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]);
+ blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]);
+ length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]);

debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n",
i, blocks * length / 1024, blocks, length);
@@ -1085,7 +1010,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
* the code below is valid only for the 1st descriptor, ie i=0
*/

- switch (pc.buffer[desc_start + 4] & 0x03) {
+ switch (pc.buf[desc_start + 4] & 0x03) {
/* Clik! drive returns this instead of CAPACITY_CURRENT */
case CAPACITY_UNFORMATTED:
if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE))
@@ -1130,7 +1055,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
break;
}
debug_log("Descriptor 0 Code: %d\n",
- pc.buffer[desc_start + 4] & 0x03);
+ pc.buf[desc_start + 4] & 0x03);
}

/* Clik! disk does not support get_flexible_disk_page */
@@ -1162,7 +1087,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)

static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
{
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;
u8 header_len, desc_cnt;
int i, blocks, length, u_array_size, u_index;
int __user *argp;
@@ -1178,7 +1103,7 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
return (-EIO);
}
- header_len = pc.buffer[3];
+ header_len = pc.buf[3];
desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */

u_index = 0;
@@ -1195,8 +1120,8 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
if (u_index >= u_array_size)
break; /* User-supplied buffer too small */

- blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]);
- length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]);
+ blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]);
+ length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]);

if (put_user(blocks, argp))
return(-EFAULT);
@@ -1227,7 +1152,7 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;
int progress_indication = 0x10000;

if (floppy->srfp) {
@@ -1271,33 +1196,39 @@ static sector_t idefloppy_capacity(ide_drive_t *drive)
*/
static int idefloppy_identify_device(ide_drive_t *drive, struct hd_driveid *id)
{
- struct idefloppy_id_gcw gcw;
+ u8 gcw[2];
+ u8 device_type, protocol, removable, drq_type, packet_size;

*((u16 *) &gcw) = id->config;

+ device_type = gcw[1] & 0x1F;
+ removable = (gcw[0] & 0x80) >> 7;
+ protocol = (gcw[1] & 0xC0) >> 6;
+ drq_type = (gcw[0] & 0x60) >> 5;
+ packet_size = gcw[0] & 0x03;
+
#ifdef CONFIG_PPC
/* kludge for Apple PowerBook internal zip */
- if ((gcw.device_type == 5) &&
- !strstr(id->model, "CD-ROM") &&
- strstr(id->model, "ZIP"))
- gcw.device_type = 0;
+ if (device_type == 5 &&
+ !strstr(id->model, "CD-ROM") && strstr(id->model, "ZIP"))
+ device_type = 0;
#endif

- if (gcw.protocol != 2)
+ if (protocol != 2)
printk(KERN_ERR "ide-floppy: Protocol (0x%02x) is not ATAPI\n",
- gcw.protocol);
- else if (gcw.device_type != 0)
+ protocol);
+ else if (device_type != 0)
printk(KERN_ERR "ide-floppy: Device type (0x%02x) is not set "
- "to floppy\n", gcw.device_type);
- else if (!gcw.removable)
+ "to floppy\n", device_type);
+ else if (!removable)
printk(KERN_ERR "ide-floppy: The removable flag is not set\n");
- else if (gcw.drq_type == 3) {
+ else if (drq_type == 3)
printk(KERN_ERR "ide-floppy: Sorry, DRQ type (0x%02x) not "
- "supported\n", gcw.drq_type);
- } else if (gcw.packet_size != 0) {
+ "supported\n", drq_type);
+ else if (packet_size != 0)
printk(KERN_ERR "ide-floppy: Packet size (0x%02x) is not 12 "
- "bytes long\n", gcw.packet_size);
- } else
+ "bytes\n", packet_size);
+ else
return 1;
return 0;
}
@@ -1322,11 +1253,12 @@ static inline void idefloppy_add_settings(ide_drive_t *drive) { ; }

static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
{
- struct idefloppy_id_gcw gcw;
+ u8 gcw[2];

*((u16 *) &gcw) = drive->id->config;
floppy->pc = floppy->pc_stack;
- if (gcw.drq_type == 1)
+
+ if (((gcw[0] & 0x60) >> 5) == 1)
floppy->flags |= IDEFLOPPY_FLAG_DRQ_INTERRUPT;
/*
* We used to check revisions here. At this point however I'm giving up.
@@ -1413,7 +1345,7 @@ static ide_driver_t idefloppy_driver = {
.media = ide_floppy,
.supports_dsc_overlap = 0,
.do_request = idefloppy_do_request,
- .end_request = idefloppy_do_end_request,
+ .end_request = idefloppy_end_request,
.error = __ide_error,
.abort = __ide_abort,
#ifdef CONFIG_IDE_PROC_FS
@@ -1426,7 +1358,7 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_floppy_obj *floppy;
ide_drive_t *drive;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;
int ret = 0;

debug_log("Reached %s\n", __func__);
@@ -1489,7 +1421,7 @@ static int idefloppy_release(struct inode *inode, struct file *filp)
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_floppy_obj *floppy = ide_floppy_g(disk);
ide_drive_t *drive = floppy->drive;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;

debug_log("Reached %s\n", __func__);

@@ -1521,8 +1453,8 @@ static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo)
return 0;
}

-static int ide_floppy_lockdoor(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc,
- unsigned long arg, unsigned int cmd)
+static int ide_floppy_lockdoor(idefloppy_floppy_t *floppy,
+ struct ide_atapi_pc *pc, unsigned long arg, unsigned int cmd)
{
if (floppy->openers > 1)
return -EBUSY;
@@ -1551,7 +1483,7 @@ static int ide_floppy_format_unit(idefloppy_floppy_t *floppy,
int __user *arg)
{
int blocks, length, flags, err = 0;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;

if (floppy->openers > 1) {
/* Don't format if someone is using the disk */
@@ -1602,7 +1534,7 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file,
struct block_device *bdev = inode->i_bdev;
struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
ide_drive_t *drive = floppy->drive;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;
void __user *argp = (void __user *)arg;
int err;

diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 9ebec08..25fda0a 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -1,17 +1,89 @@
/*
* generic/default IDE host driver
*
- * Copyright (C) 2004 Bartlomiej Zolnierkiewicz
+ * Copyright (C) 2004, 2008 Bartlomiej Zolnierkiewicz
* This code was split off from ide.c. See it for original copyrights.
*
* May be copied or modified under the terms of the GNU General Public License.
*/

+/*
+ * For special cases new interfaces may be added using sysfs, i.e.
+ *
+ * echo -n "0x168:0x36e:10" > /sys/class/ide_generic/add
+ *
+ * will add an interface using I/O ports 0x168-0x16f/0x36e and IRQ 10.
+ */
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/ide.h>

+#define DRV_NAME "ide_generic"
+
+static ssize_t store_add(struct class *cls, const char *buf, size_t n)
+{
+ ide_hwif_t *hwif;
+ unsigned int base, ctl;
+ int irq;
+ hw_regs_t hw;
+ u8 idx[] = { 0xff, 0xff, 0xff, 0xff };
+
+ if (sscanf(buf, "%x:%x:%d", &base, &ctl, &irq) != 3)
+ return -EINVAL;
+
+ hwif = ide_find_port(base);
+ if (hwif == NULL)
+ return -ENOENT;
+
+ memset(&hw, 0, sizeof(hw));
+ ide_std_init_ports(&hw, base, ctl);
+ hw.irq = irq;
+ hw.chipset = ide_generic;
+
+ ide_init_port_hw(hwif, &hw);
+
+ idx[0] = hwif->index;
+
+ ide_device_add(idx, NULL);
+
+ return n;
+};
+
+static struct class_attribute ide_generic_class_attrs[] = {
+ __ATTR(add, S_IWUSR, NULL, store_add),
+ __ATTR_NULL
+};
+
+static void ide_generic_class_release(struct class *cls)
+{
+ kfree(cls);
+}
+
+static int __init ide_generic_sysfs_init(void)
+{
+ struct class *cls;
+ int rc;
+
+ cls = kzalloc(sizeof(*cls), GFP_KERNEL);
+ if (!cls)
+ return -ENOMEM;
+
+ cls->name = DRV_NAME;
+ cls->owner = THIS_MODULE;
+ cls->class_release = ide_generic_class_release;
+ cls->class_attrs = ide_generic_class_attrs;
+
+ rc = class_register(cls);
+ if (rc) {
+ kfree(cls);
+ return rc;
+ }
+
+ return 0;
+}
+
static int __init ide_generic_init(void)
{
u8 idx[MAX_HWIFS];
@@ -19,15 +91,26 @@ static int __init ide_generic_init(void)

for (i = 0; i < MAX_HWIFS; i++) {
ide_hwif_t *hwif = &ide_hwifs[i];
+ unsigned long io_addr = ide_default_io_base(i);
+ hw_regs_t hw;
+
+ if (hwif->chipset == ide_unknown && io_addr) {
+ memset(&hw, 0, sizeof(hw));
+ ide_std_init_ports(&hw, io_addr, io_addr + 0x206);
+ hw.irq = ide_default_irq(io_addr);
+ ide_init_port_hw(hwif, &hw);

- if (hwif->io_ports[IDE_DATA_OFFSET] && !hwif->present)
idx[i] = i;
- else
+ } else
idx[i] = 0xff;
}

ide_device_add_all(idx, NULL);

+ if (ide_generic_sysfs_init())
+ printk(KERN_ERR DRV_NAME ": failed to create ide_generic "
+ "class\n");
+
return 0;
}

diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 7153796..31e5afa 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -301,39 +301,45 @@ void ide_tf_read(ide_drive_t *drive, ide_task_t *task)
struct ide_taskfile *tf = &task->tf;

if (task->tf_flags & IDE_TFLAG_IN_DATA) {
- u16 data = hwif->INW(IDE_DATA_REG);
+ u16 data = hwif->INW(hwif->io_ports[IDE_DATA_OFFSET]);

tf->data = data & 0xff;
tf->hob_data = (data >> 8) & 0xff;
}

/* be sure we're looking at the low order bits */
- hwif->OUTB(drive->ctl & ~0x80, IDE_CONTROL_REG);
+ hwif->OUTB(drive->ctl & ~0x80, hwif->io_ports[IDE_CONTROL_OFFSET]);

if (task->tf_flags & IDE_TFLAG_IN_NSECT)
- tf->nsect = hwif->INB(IDE_NSECTOR_REG);
+ tf->nsect = hwif->INB(hwif->io_ports[IDE_NSECTOR_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_LBAL)
- tf->lbal = hwif->INB(IDE_SECTOR_REG);
+ tf->lbal = hwif->INB(hwif->io_ports[IDE_SECTOR_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_LBAM)
- tf->lbam = hwif->INB(IDE_LCYL_REG);
+ tf->lbam = hwif->INB(hwif->io_ports[IDE_LCYL_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_LBAH)
- tf->lbah = hwif->INB(IDE_HCYL_REG);
+ tf->lbah = hwif->INB(hwif->io_ports[IDE_HCYL_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
- tf->device = hwif->INB(IDE_SELECT_REG);
+ tf->device = hwif->INB(hwif->io_ports[IDE_SELECT_OFFSET]);

if (task->tf_flags & IDE_TFLAG_LBA48) {
- hwif->OUTB(drive->ctl | 0x80, IDE_CONTROL_REG);
+ hwif->OUTB(drive->ctl | 0x80,
+ hwif->io_ports[IDE_CONTROL_OFFSET]);

if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
- tf->hob_feature = hwif->INB(IDE_FEATURE_REG);
+ tf->hob_feature =
+ hwif->INB(hwif->io_ports[IDE_FEATURE_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
- tf->hob_nsect = hwif->INB(IDE_NSECTOR_REG);
+ tf->hob_nsect =
+ hwif->INB(hwif->io_ports[IDE_NSECTOR_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
- tf->hob_lbal = hwif->INB(IDE_SECTOR_REG);
+ tf->hob_lbal =
+ hwif->INB(hwif->io_ports[IDE_SECTOR_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
- tf->hob_lbam = hwif->INB(IDE_LCYL_REG);
+ tf->hob_lbam =
+ hwif->INB(hwif->io_ports[IDE_LCYL_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
- tf->hob_lbah = hwif->INB(IDE_HCYL_REG);
+ tf->hob_lbah =
+ hwif->INB(hwif->io_ports[IDE_HCYL_OFFSET]);
}
}

@@ -448,7 +454,8 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8
if (err == ABRT_ERR) {
if (drive->select.b.lba &&
/* some newer drives don't support WIN_SPECIFY */
- hwif->INB(IDE_COMMAND_REG) == WIN_SPECIFY)
+ hwif->INB(hwif->io_ports[IDE_COMMAND_OFFSET]) ==
+ WIN_SPECIFY)
return ide_stopped;
} else if ((err & BAD_CRC) == BAD_CRC) {
/* UDMA crc error, just retry the operation */
@@ -500,7 +507,8 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u

if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
- hwif->OUTB(WIN_IDLEIMMEDIATE, IDE_COMMAND_REG);
+ hwif->OUTB(WIN_IDLEIMMEDIATE,
+ hwif->io_ports[IDE_COMMAND_OFFSET]);

if (rq->errors >= ERROR_MAX) {
ide_kill_rq(drive, rq);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index e77cee0..4594421 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -158,9 +158,12 @@ EXPORT_SYMBOL(default_hwif_mmiops);

void SELECT_DRIVE (ide_drive_t *drive)
{
- if (HWIF(drive)->selectproc)
- HWIF(drive)->selectproc(drive);
- HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG);
+ ide_hwif_t *hwif = drive->hwif;
+
+ if (hwif->selectproc)
+ hwif->selectproc(drive);
+
+ hwif->OUTB(drive->select.all, hwif->io_ports[IDE_SELECT_OFFSET]);
}

void SELECT_MASK (ide_drive_t *drive, int mask)
@@ -194,15 +197,18 @@ static void ata_input_data(ide_drive_t *drive, void *buffer, u32 wcount)
if (io_32bit) {
if (io_32bit & 2) {
unsigned long flags;
+
local_irq_save(flags);
- ata_vlb_sync(drive, IDE_NSECTOR_REG);
- hwif->INSL(IDE_DATA_REG, buffer, wcount);
+ ata_vlb_sync(drive, hwif->io_ports[IDE_NSECTOR_OFFSET]);
+ hwif->INSL(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ wcount);
local_irq_restore(flags);
} else
- hwif->INSL(IDE_DATA_REG, buffer, wcount);
- } else {
- hwif->INSW(IDE_DATA_REG, buffer, wcount<<1);
- }
+ hwif->INSL(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ wcount);
+ } else
+ hwif->INSW(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ wcount << 1);
}

/*
@@ -216,15 +222,18 @@ static void ata_output_data(ide_drive_t *drive, void *buffer, u32 wcount)
if (io_32bit) {
if (io_32bit & 2) {
unsigned long flags;
+
local_irq_save(flags);
- ata_vlb_sync(drive, IDE_NSECTOR_REG);
- hwif->OUTSL(IDE_DATA_REG, buffer, wcount);
+ ata_vlb_sync(drive, hwif->io_ports[IDE_NSECTOR_OFFSET]);
+ hwif->OUTSL(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ wcount);
local_irq_restore(flags);
} else
- hwif->OUTSL(IDE_DATA_REG, buffer, wcount);
- } else {
- hwif->OUTSW(IDE_DATA_REG, buffer, wcount<<1);
- }
+ hwif->OUTSL(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ wcount);
+ } else
+ hwif->OUTSW(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ wcount << 1);
}

/*
@@ -243,13 +252,15 @@ static void atapi_input_bytes(ide_drive_t *drive, void *buffer, u32 bytecount)
#if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
if (MACH_IS_ATARI || MACH_IS_Q40) {
/* Atari has a byte-swapped IDE interface */
- insw_swapw(IDE_DATA_REG, buffer, bytecount / 2);
+ insw_swapw(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ bytecount / 2);
return;
}
#endif /* CONFIG_ATARI || CONFIG_Q40 */
hwif->ata_input_data(drive, buffer, bytecount / 4);
if ((bytecount & 0x03) >= 2)
- hwif->INSW(IDE_DATA_REG, ((u8 *)buffer)+(bytecount & ~0x03), 1);
+ hwif->INSW(hwif->io_ports[IDE_DATA_OFFSET],
+ (u8 *)buffer + (bytecount & ~0x03), 1);
}

static void atapi_output_bytes(ide_drive_t *drive, void *buffer, u32 bytecount)
@@ -260,13 +271,15 @@ static void atapi_output_bytes(ide_drive_t *drive, void *buffer, u32 bytecount)
#if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
if (MACH_IS_ATARI || MACH_IS_Q40) {
/* Atari has a byte-swapped IDE interface */
- outsw_swapw(IDE_DATA_REG, buffer, bytecount / 2);
+ outsw_swapw(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ bytecount / 2);
return;
}
#endif /* CONFIG_ATARI || CONFIG_Q40 */
hwif->ata_output_data(drive, buffer, bytecount / 4);
if ((bytecount & 0x03) >= 2)
- hwif->OUTSW(IDE_DATA_REG, ((u8*)buffer)+(bytecount & ~0x03), 1);
+ hwif->OUTSW(hwif->io_ports[IDE_DATA_OFFSET],
+ (u8 *)buffer + (bytecount & ~0x03), 1);
}

void default_hwif_transport(ide_hwif_t *hwif)
@@ -429,7 +442,7 @@ int drive_is_ready (ide_drive_t *drive)
* an interrupt with another pci card/device. We make no assumptions
* about possible isa-pnp and pci-pnp issues yet.
*/
- if (IDE_CONTROL_REG)
+ if (hwif->io_ports[IDE_CONTROL_OFFSET])
stat = ide_read_altstatus(drive);
else
/* Note: this may clear a pending IRQ!! */
@@ -631,7 +644,7 @@ int ide_driveid_update(ide_drive_t *drive)
SELECT_MASK(drive, 1);
ide_set_irq(drive, 1);
msleep(50);
- hwif->OUTB(WIN_IDENTIFY, IDE_COMMAND_REG);
+ hwif->OUTB(WIN_IDENTIFY, hwif->io_ports[IDE_COMMAND_OFFSET]);
timeout = jiffies + WAIT_WORSTCASE;
do {
if (time_after(jiffies, timeout)) {
@@ -718,9 +731,10 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
SELECT_MASK(drive, 0);
udelay(1);
ide_set_irq(drive, 0);
- hwif->OUTB(speed, IDE_NSECTOR_REG);
- hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG);
- hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG);
+ hwif->OUTB(speed, hwif->io_ports[IDE_NSECTOR_OFFSET]);
+ hwif->OUTB(SETFEATURES_XFER, hwif->io_ports[IDE_FEATURE_OFFSET]);
+ hwif->OUTBSYNC(drive, WIN_SETFEATURES,
+ hwif->io_ports[IDE_COMMAND_OFFSET]);
if (drive->quirk_list == 2)
ide_set_irq(drive, 1);

@@ -828,7 +842,7 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler,

spin_lock_irqsave(&ide_lock, flags);
__ide_set_handler(drive, handler, timeout, expiry);
- hwif->OUTBSYNC(drive, cmd, IDE_COMMAND_REG);
+ hwif->OUTBSYNC(drive, cmd, hwif->io_ports[IDE_COMMAND_OFFSET]);
/*
* Drive takes 400nS to respond, we must avoid the IRQ being
* serviced before that.
@@ -1009,7 +1023,8 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
unsigned long flags;
ide_hwif_t *hwif;
ide_hwgroup_t *hwgroup;
-
+ u8 ctl;
+
spin_lock_irqsave(&ide_lock, flags);
hwif = HWIF(drive);
hwgroup = HWGROUP(drive);
@@ -1023,7 +1038,8 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
pre_reset(drive);
SELECT_DRIVE(drive);
udelay (20);
- hwif->OUTBSYNC(drive, WIN_SRST, IDE_COMMAND_REG);
+ hwif->OUTBSYNC(drive, WIN_SRST,
+ hwif->io_ports[IDE_COMMAND_OFFSET]);
ndelay(400);
hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
hwgroup->polling = 1;
@@ -1039,7 +1055,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
for (unit = 0; unit < MAX_DRIVES; ++unit)
pre_reset(&hwif->drives[unit]);

- if (!IDE_CONTROL_REG) {
+ if (hwif->io_ports[IDE_CONTROL_OFFSET] == 0) {
spin_unlock_irqrestore(&ide_lock, flags);
return ide_stopped;
}
@@ -1054,16 +1070,14 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
* recover from reset very quickly, saving us the first 50ms wait time.
*/
/* set SRST and nIEN */
- hwif->OUTBSYNC(drive, drive->ctl|6,IDE_CONTROL_REG);
+ hwif->OUTBSYNC(drive, drive->ctl|6, hwif->io_ports[IDE_CONTROL_OFFSET]);
/* more than enough time */
udelay(10);
- if (drive->quirk_list == 2) {
- /* clear SRST and nIEN */
- hwif->OUTBSYNC(drive, drive->ctl, IDE_CONTROL_REG);
- } else {
- /* clear SRST, leave nIEN */
- hwif->OUTBSYNC(drive, drive->ctl|2, IDE_CONTROL_REG);
- }
+ if (drive->quirk_list == 2)
+ ctl = drive->ctl; /* clear SRST and nIEN */
+ else
+ ctl = drive->ctl | 2; /* clear SRST, leave nIEN */
+ hwif->OUTBSYNC(drive, ctl, hwif->io_ports[IDE_CONTROL_OFFSET]);
/* more than enough time */
udelay(10);
hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index c14bb53..34c2ad3 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -62,7 +62,7 @@ static void idepnp_remove(struct pnp_dev * dev)
ide_hwif_t *hwif = pnp_get_drvdata(dev);

if (hwif)
- ide_unregister(hwif->index, 0, 0);
+ ide_unregister(hwif->index);
else
printk(KERN_ERR "idepnp: Unable to remove device, please report.\n");
}
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 47a1149..6a196c2 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -271,7 +271,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
/* take a deep breath */
msleep(50);

- if (IDE_CONTROL_REG) {
+ if (hwif->io_ports[IDE_CONTROL_OFFSET]) {
a = ide_read_altstatus(drive);
s = ide_read_status(drive);
if ((a ^ s) & ~INDEX_STAT)
@@ -289,10 +289,10 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
*/
if ((cmd == WIN_PIDENTIFY))
/* disable dma & overlap */
- hwif->OUTB(0, IDE_FEATURE_REG);
+ hwif->OUTB(0, hwif->io_ports[IDE_FEATURE_OFFSET]);

/* ask drive for ID */
- hwif->OUTB(cmd, IDE_COMMAND_REG);
+ hwif->OUTB(cmd, hwif->io_ports[IDE_COMMAND_OFFSET]);

timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
timeout += jiffies;
@@ -353,7 +353,7 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd)
* interrupts during the identify-phase that
* the irq handler isn't expecting.
*/
- if (IDE_CONTROL_REG) {
+ if (hwif->io_ports[IDE_CONTROL_OFFSET]) {
if (!hwif->irq) {
autoprobe = 1;
cookie = probe_irq_on();
@@ -445,7 +445,8 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
msleep(50);
SELECT_DRIVE(drive);
msleep(50);
- if (hwif->INB(IDE_SELECT_REG) != drive->select.all && !drive->present) {
+ if (hwif->INB(hwif->io_ports[IDE_SELECT_OFFSET]) != drive->select.all &&
+ !drive->present) {
if (drive->select.b.unit != 0) {
/* exit with drive0 selected */
SELECT_DRIVE(&hwif->drives[0]);
@@ -477,9 +478,11 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
printk(KERN_ERR "%s: no response (status = 0x%02x), "
"resetting drive\n", drive->name, stat);
msleep(50);
- hwif->OUTB(drive->select.all, IDE_SELECT_REG);
+ hwif->OUTB(drive->select.all,
+ hwif->io_ports[IDE_SELECT_OFFSET]);
msleep(50);
- hwif->OUTB(WIN_SRST, IDE_COMMAND_REG);
+ hwif->OUTB(WIN_SRST,
+ hwif->io_ports[IDE_COMMAND_OFFSET]);
(void)ide_busy_sleep(hwif);
rc = try_to_identify(drive, cmd);
}
@@ -515,7 +518,7 @@ static void enable_nest (ide_drive_t *drive)
printk("%s: enabling %s -- ", hwif->name, drive->id->model);
SELECT_DRIVE(drive);
msleep(50);
- hwif->OUTB(EXABYTE_ENABLE_NEST, IDE_COMMAND_REG);
+ hwif->OUTB(EXABYTE_ENABLE_NEST, hwif->io_ports[IDE_COMMAND_OFFSET]);

if (ide_busy_sleep(hwif)) {
printk(KERN_CONT "failed (timeout)\n");
@@ -623,7 +626,7 @@ static void hwif_release_dev (struct device *dev)
complete(&hwif->gendev_rel_comp);
}

-static void ide_register_port(ide_hwif_t *hwif)
+static int ide_register_port(ide_hwif_t *hwif)
{
int ret;

@@ -639,9 +642,23 @@ static void ide_register_port(ide_hwif_t *hwif)
}
hwif->gendev.release = hwif_release_dev;
ret = device_register(&hwif->gendev);
- if (ret < 0)
+ if (ret < 0) {
printk(KERN_WARNING "IDE: %s: device_register error: %d\n",
__FUNCTION__, ret);
+ goto out;
+ }
+
+ get_device(&hwif->gendev);
+
+ hwif->portdev = device_create(ide_port_class, &hwif->gendev,
+ MKDEV(0, 0), hwif->name);
+ if (IS_ERR(hwif->portdev)) {
+ ret = PTR_ERR(hwif->portdev);
+ device_unregister(&hwif->gendev);
+ }
+ dev_set_drvdata(hwif->portdev, hwif);
+out:
+ return ret;
}

/**
@@ -949,6 +966,7 @@ static void ide_port_setup_devices(ide_hwif_t *hwif)
{
int i;

+ mutex_lock(&ide_cfg_mtx);
for (i = 0; i < MAX_DRIVES; i++) {
ide_drive_t *drive = &hwif->drives[i];

@@ -963,6 +981,7 @@ static void ide_port_setup_devices(ide_hwif_t *hwif)

ide_add_drive_to_hwgroup(drive);
}
+ mutex_unlock(&ide_cfg_mtx);
}

/*
@@ -1088,8 +1107,6 @@ static int init_irq (ide_hwif_t *hwif)
hwif->sharing_irq ? "shar" : "serializ", match->name);
printk("\n");

- ide_port_setup_devices(hwif);
-
mutex_unlock(&ide_cfg_mtx);
return 0;
out_unlink:
@@ -1199,6 +1216,8 @@ static void drive_release_dev (struct device *dev)
{
ide_drive_t *drive = container_of(dev, ide_drive_t, gendev);

+ ide_proc_unregister_device(drive);
+
spin_lock_irq(&ide_lock);
ide_remove_drive_from_hwgroup(drive);
kfree(drive->id);
@@ -1214,6 +1233,10 @@ static void drive_release_dev (struct device *dev)
complete(&drive->gendev_rel_comp);
}

+#ifndef ide_default_irq
+#define ide_default_irq(irq) 0
+#endif
+
static int hwif_init(ide_hwif_t *hwif)
{
int old_irq;
@@ -1225,13 +1248,6 @@ static int hwif_init(ide_hwif_t *hwif)
return 0;
}
}
-#ifdef CONFIG_BLK_DEV_HD
- if (hwif->irq == HD_IRQ && hwif->io_ports[IDE_DATA_OFFSET] != HD_DATA) {
- printk("%s: CANNOT SHARE IRQ WITH OLD "
- "HARDDISK DRIVER (hd.c)\n", hwif->name);
- return 0;
- }
-#endif /* CONFIG_BLK_DEV_HD */

if (register_blkdev(hwif->major, hwif->name))
return 0;
@@ -1366,13 +1382,68 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
/* call chipset specific routine for each enabled port */
if (d->init_hwif)
d->init_hwif(hwif);
+}

+static void ide_port_cable_detect(ide_hwif_t *hwif)
+{
if (hwif->cable_detect && (hwif->ultra_mask & 0x78)) {
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = hwif->cable_detect(hwif);
}
}

+static ssize_t store_delete_devices(struct device *portdev,
+ struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ ide_hwif_t *hwif = dev_get_drvdata(portdev);
+
+ if (strncmp(buf, "1", n))
+ return -EINVAL;
+
+ ide_port_unregister_devices(hwif);
+
+ return n;
+};
+
+static DEVICE_ATTR(delete_devices, S_IWUSR, NULL, store_delete_devices);
+
+static ssize_t store_scan(struct device *portdev,
+ struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ ide_hwif_t *hwif = dev_get_drvdata(portdev);
+
+ if (strncmp(buf, "1", n))
+ return -EINVAL;
+
+ ide_port_unregister_devices(hwif);
+ ide_port_scan(hwif);
+
+ return n;
+};
+
+static DEVICE_ATTR(scan, S_IWUSR, NULL, store_scan);
+
+static struct device_attribute *ide_port_attrs[] = {
+ &dev_attr_delete_devices,
+ &dev_attr_scan,
+ NULL
+};
+
+static int ide_sysfs_register_port(ide_hwif_t *hwif)
+{
+ int i, rc;
+
+ for (i = 0; ide_port_attrs[i]; i++) {
+ rc = device_create_file(hwif->portdev, ide_port_attrs[i]);
+ if (rc)
+ break;
+ }
+
+ return rc;
+}
+
int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
{
ide_hwif_t *hwif, *mate = NULL;
@@ -1394,6 +1465,7 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
mate = (i & 1) ? NULL : hwif;

ide_init_port(hwif, i & 1, d);
+ ide_port_cable_detect(hwif);
ide_port_init_devices(hwif);
}

@@ -1441,6 +1513,8 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
continue;
}

+ ide_port_setup_devices(hwif);
+
ide_acpi_init(hwif);
ide_acpi_port_init_devices(hwif);
}
@@ -1452,8 +1526,7 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
hwif = &ide_hwifs[idx[i]];

if (hwif->present) {
- if (hwif->chipset == ide_unknown ||
- hwif->chipset == ide_forced)
+ if (hwif->chipset == ide_unknown)
hwif->chipset = ide_generic;
hwif_register_devices(hwif);
}
@@ -1466,6 +1539,7 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
hwif = &ide_hwifs[idx[i]];

if (hwif->present) {
+ ide_sysfs_register_port(hwif);
ide_proc_register_port(hwif);
ide_proc_port_register_devices(hwif);
}
@@ -1486,3 +1560,21 @@ int ide_device_add(u8 idx[4], const struct ide_port_info *d)
return ide_device_add_all(idx_all, d);
}
EXPORT_SYMBOL_GPL(ide_device_add);
+
+void ide_port_scan(ide_hwif_t *hwif)
+{
+ ide_port_cable_detect(hwif);
+ ide_port_init_devices(hwif);
+
+ if (ide_probe_port(hwif) < 0)
+ return;
+
+ hwif->present = 1;
+
+ ide_port_tune_devices(hwif);
+ ide_acpi_port_init_devices(hwif);
+ ide_port_setup_devices(hwif);
+ hwif_register_devices(hwif);
+ ide_proc_port_register_devices(hwif);
+}
+EXPORT_SYMBOL_GPL(ide_port_scan);
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index bab88ca..edd7f18 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -46,9 +46,6 @@ static int proc_ide_read_imodel
int len;
const char *name;

- /*
- * Neither ide_unknown nor ide_forced should be set at this point.
- */
switch (hwif->chipset) {
case ide_generic: name = "generic"; break;
case ide_pci: name = "pci"; break;
@@ -764,27 +761,16 @@ void ide_proc_port_register_devices(ide_hwif_t *hwif)
}
}

-static void destroy_proc_ide_device(ide_hwif_t *hwif, ide_drive_t *drive)
+void ide_proc_unregister_device(ide_drive_t *drive)
{
if (drive->proc) {
ide_remove_proc_entries(drive->proc, generic_drive_entries);
remove_proc_entry(drive->name, proc_ide_root);
- remove_proc_entry(drive->name, hwif->proc);
+ remove_proc_entry(drive->name, drive->hwif->proc);
drive->proc = NULL;
}
}

-static void destroy_proc_ide_drives(ide_hwif_t *hwif)
-{
- int d;
-
- for (d = 0; d < MAX_DRIVES; d++) {
- ide_drive_t *drive = &hwif->drives[d];
- if (drive->proc)
- destroy_proc_ide_device(hwif, drive);
- }
-}
-
static ide_proc_entry_t hwif_entries[] = {
{ "channel", S_IFREG|S_IRUGO, proc_ide_read_channel, NULL },
{ "mate", S_IFREG|S_IRUGO, proc_ide_read_mate, NULL },
@@ -816,7 +802,6 @@ EXPORT_SYMBOL_GPL(ide_pci_create_host_proc);
void ide_proc_unregister_port(ide_hwif_t *hwif)
{
if (hwif->proc) {
- destroy_proc_ide_drives(hwif);
ide_remove_proc_entries(hwif->proc, hwif_entries);
remove_proc_entry(hwif->name, proc_ide_root);
hwif->proc = NULL;
diff --git a/drivers/ide/ide-scan-pci.c b/drivers/ide/ide-scan-pci.c
index 93d2e41..98888da 100644
--- a/drivers/ide/ide-scan-pci.c
+++ b/drivers/ide/ide-scan-pci.c
@@ -88,13 +88,8 @@ static int __init ide_scan_pcibus(void)
struct list_head *l, *n;

pre_init = 0;
- if (!ide_scan_direction)
- while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)))
- ide_scan_pcidev(dev);
- else
- while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID,
- dev)))
- ide_scan_pcidev(dev);
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)))
+ ide_scan_pcidev(dev);

/*
* Hand the drivers over to the PCI layer now we
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 0598ecf..f43fd07 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -181,49 +181,63 @@ struct idetape_bh {
char *b_data;
};

-typedef struct idetape_packet_command_s {
- /* Actual packet bytes */
- u8 c[12];
- /* On each retry, we increment retries */
- int retries;
- /* Error code */
- int error;
- /* Bytes to transfer */
- int request_transfer;
- /* Bytes actually transferred */
- int actually_transferred;
- /* Size of our data buffer */
- int buffer_size;
- struct idetape_bh *bh;
- char *b_data;
- int b_count;
- /* Data buffer */
- u8 *buffer;
- /* Pointer into the above buffer */
- u8 *current_position;
- /* Called when this packet command is completed */
- ide_startstop_t (*callback) (ide_drive_t *);
- /* Temporary buffer */
- u8 pc_buffer[IDETAPE_PC_BUFFER_SIZE];
- /* Status/Action bit flags: long for set_bit */
- unsigned long flags;
-} idetape_pc_t;
+/* Tape door status */
+#define DOOR_UNLOCKED 0
+#define DOOR_LOCKED 1
+#define DOOR_EXPLICITLY_LOCKED 2
+
+/* Some defines for the SPACE command */
+#define IDETAPE_SPACE_OVER_FILEMARK 1
+#define IDETAPE_SPACE_TO_EOD 3
+
+/* Some defines for the LOAD UNLOAD command */
+#define IDETAPE_LU_LOAD_MASK 1
+#define IDETAPE_LU_RETENSION_MASK 2
+#define IDETAPE_LU_EOT_MASK 4

/*
- * Packet command flag bits.
+ * Special requests for our block device strategy routine.
+ *
+ * In order to service a character device command, we add special requests to
+ * the tail of our block device request queue and wait for their completion.
*/
-/* Set when an error is considered normal - We won't retry */
-#define PC_ABORT 0
-/* 1 When polling for DSC on a media access command */
-#define PC_WAIT_FOR_DSC 1
-/* 1 when we prefer to use DMA if possible */
-#define PC_DMA_RECOMMENDED 2
-/* 1 while DMA in progress */
-#define PC_DMA_IN_PROGRESS 3
-/* 1 when encountered problem during DMA */
-#define PC_DMA_ERROR 4
-/* Data direction */
-#define PC_WRITING 5
+
+enum {
+ REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */
+ REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */
+ REQ_IDETAPE_READ = (1 << 2),
+ REQ_IDETAPE_WRITE = (1 << 3),
+};
+
+/* Error codes returned in rq->errors to the higher part of the driver. */
+#define IDETAPE_ERROR_GENERAL 101
+#define IDETAPE_ERROR_FILEMARK 102
+#define IDETAPE_ERROR_EOD 103
+
+/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
+#define IDETAPE_BLOCK_DESCRIPTOR 0
+#define IDETAPE_CAPABILITIES_PAGE 0x2a
+
+/* Tape flag bits values. */
+enum {
+ IDETAPE_FLAG_IGNORE_DSC = (1 << 0),
+ /* 0 When the tape position is unknown */
+ IDETAPE_FLAG_ADDRESS_VALID = (1 << 1),
+ /* Device already opened */
+ IDETAPE_FLAG_BUSY = (1 << 2),
+ /* Error detected in a pipeline stage */
+ IDETAPE_FLAG_PIPELINE_ERR = (1 << 3),
+ /* Attempt to auto-detect the current user block size */
+ IDETAPE_FLAG_DETECT_BS = (1 << 4),
+ /* Currently on a filemark */
+ IDETAPE_FLAG_FILEMARK = (1 << 5),
+ /* DRQ interrupt device */
+ IDETAPE_FLAG_DRQ_INTERRUPT = (1 << 6),
+ /* pipeline active */
+ IDETAPE_FLAG_PIPELINE_ACTIVE = (1 << 7),
+ /* 0 = no tape is loaded, so we don't rewind after ejecting */
+ IDETAPE_FLAG_MEDIUM_PRESENT = (1 << 8),
+};

/* A pipeline stage. */
typedef struct idetape_stage_s {
@@ -258,11 +272,11 @@ typedef struct ide_tape_obj {
* retry, to get detailed information on what went wrong.
*/
/* Current packet command */
- idetape_pc_t *pc;
+ struct ide_atapi_pc *pc;
/* Last failed packet command */
- idetape_pc_t *failed_pc;
+ struct ide_atapi_pc *failed_pc;
/* Packet command stack */
- idetape_pc_t pc_stack[IDETAPE_PC_STACK];
+ struct ide_atapi_pc pc_stack[IDETAPE_PC_STACK];
/* Next free packet command storage space */
int pc_stack_index;
struct request rq_stack[IDETAPE_PC_STACK];
@@ -446,58 +460,6 @@ static void ide_tape_put(struct ide_tape_obj *tape)
mutex_unlock(&idetape_ref_mutex);
}

-/* Tape door status */
-#define DOOR_UNLOCKED 0
-#define DOOR_LOCKED 1
-#define DOOR_EXPLICITLY_LOCKED 2
-
-/*
- * Tape flag bits values.
- */
-#define IDETAPE_IGNORE_DSC 0
-#define IDETAPE_ADDRESS_VALID 1 /* 0 When the tape position is unknown */
-#define IDETAPE_BUSY 2 /* Device already opened */
-#define IDETAPE_PIPELINE_ERROR 3 /* Error detected in a pipeline stage */
-#define IDETAPE_DETECT_BS 4 /* Attempt to auto-detect the current user block size */
-#define IDETAPE_FILEMARK 5 /* Currently on a filemark */
-#define IDETAPE_DRQ_INTERRUPT 6 /* DRQ interrupt device */
-#define IDETAPE_READ_ERROR 7
-#define IDETAPE_PIPELINE_ACTIVE 8 /* pipeline active */
-/* 0 = no tape is loaded, so we don't rewind after ejecting */
-#define IDETAPE_MEDIUM_PRESENT 9
-
-/* Some defines for the SPACE command */
-#define IDETAPE_SPACE_OVER_FILEMARK 1
-#define IDETAPE_SPACE_TO_EOD 3
-
-/* Some defines for the LOAD UNLOAD command */
-#define IDETAPE_LU_LOAD_MASK 1
-#define IDETAPE_LU_RETENSION_MASK 2
-#define IDETAPE_LU_EOT_MASK 4
-
-/*
- * Special requests for our block device strategy routine.
- *
- * In order to service a character device command, we add special requests to
- * the tail of our block device request queue and wait for their completion.
- */
-
-enum {
- REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */
- REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */
- REQ_IDETAPE_READ = (1 << 2),
- REQ_IDETAPE_WRITE = (1 << 3),
-};
-
-/* Error codes returned in rq->errors to the higher part of the driver. */
-#define IDETAPE_ERROR_GENERAL 101
-#define IDETAPE_ERROR_FILEMARK 102
-#define IDETAPE_ERROR_EOD 103
-
-/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
-#define IDETAPE_BLOCK_DESCRIPTOR 0
-#define IDETAPE_CAPABILITIES_PAGE 0x2a
-
/*
* The variables below are used for the character device interface. Additional
* state variables are defined in our ide_drive_t structure.
@@ -518,17 +480,7 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
return tape;
}

-/*
- * Too bad. The drive wants to send us data which we are not ready to accept.
- * Just throw it away.
- */
-static void idetape_discard_data(ide_drive_t *drive, unsigned int bcount)
-{
- while (bcount--)
- (void) HWIF(drive)->INB(IDE_DATA_REG);
-}
-
-static void idetape_input_buffers(ide_drive_t *drive, idetape_pc_t *pc,
+static void idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
unsigned int bcount)
{
struct idetape_bh *bh = pc->bh;
@@ -538,7 +490,7 @@ static void idetape_input_buffers(ide_drive_t *drive, idetape_pc_t *pc,
if (bh == NULL) {
printk(KERN_ERR "ide-tape: bh == NULL in "
"idetape_input_buffers\n");
- idetape_discard_data(drive, bcount);
+ ide_atapi_discard_data(drive, bcount);
return;
}
count = min(
@@ -557,7 +509,7 @@ static void idetape_input_buffers(ide_drive_t *drive, idetape_pc_t *pc,
pc->bh = bh;
}

-static void idetape_output_buffers(ide_drive_t *drive, idetape_pc_t *pc,
+static void idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
unsigned int bcount)
{
struct idetape_bh *bh = pc->bh;
@@ -585,13 +537,13 @@ static void idetape_output_buffers(ide_drive_t *drive, idetape_pc_t *pc,
}
}

-static void idetape_update_buffers(idetape_pc_t *pc)
+static void idetape_update_buffers(struct ide_atapi_pc *pc)
{
struct idetape_bh *bh = pc->bh;
int count;
- unsi