Re: [crash, bisected] Re: [PATCH 3/4] x86_64: Fold pda into per cpu area

Mike Travis <travis@xxxxxxx> writes:

will only boot and run with gcc-4.2.0, and does the "failure at grub" screen
with
gcc-4.2.4 ...!

Do these tests have an early serial console enabled? I want to confirm
that the failure is very early in boot before or just as we reach C code.

If you don't have an early console we could be failing late in the process just
not have visibility.

Any other suggestions?

If you have a serial console to add a little bit of instrumentation super duper early.
Although looking at the generated objects might be just as interesting.

Eric

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Relevant Pages

  • Re: [crash, bisected] Re: [PATCH 3/4] x86_64: Fold pda into per cpu area
    ... Eric W. Biederman wrote: ... that the failure is very early in boot before or just as we reach C code. ... If you have a serial console to add a little bit of instrumentation super duper early. ...
    (Linux-Kernel)
  • Re: boot/startup help
    ... A couple days ago it was booting and I could get into the shell over ... at the other end of the mvme serial console line where I'm running ... I booted it via bootp and end up at the same ... full disk boot log -- this is with the front panel hex dial set to ...
    (comp.os.os9)
  • Re: hard lock-up writing to tape
    ... Num lock doesn't come on. ... you will need to set up a serial console with some special ... Enable the serial console and boot the system. ... If you get the db> prompt, then your hang is probably due to a Giant ...
    (freebsd-current)
  • Re: Machine Freezes with SMP+APIC enabled.
    ... Hm, smells like Giant deadlock. ... you will need to set up a serial console with some special ... Enable the serial console and boot the system. ... If you get the db> prompt, then your hang is probably due to a Giant ...
    (freebsd-stable)
  • Re: Panic on FreeBSD 6.0BETA1
    ... > to single user mode to complete the install. ... through the serial port into a terminal window on the second machine; ... I haven't actually needed to do this myself, but if at the boot screen ... one in case I need to set up a serial console, so I got lucky I guess. ...
    (freebsd-current)