[PATCH 04/18] lirc driver for 2nd-gen and later Media Center Ed. USB IR transceivers

Successfully tested with the mce v2 receiver and remote that shipped with my
Hauppauge HVR-1500 expresscard tuner.

Signed-off-by: Jarod Wilson <jarod@xxxxxxxxxx>
Signed-off-by: Janne Grunau <j@xxxxxxxxxx>
CC: Christoph Bartelmus <lirc@xxxxxxxxxxxx>
Tested-by: Jarod Wilson <jarod@xxxxxxxxxx>
---
drivers/input/lirc/Kconfig | 7 +
drivers/input/lirc/Makefile | 1 +
drivers/input/lirc/lirc_mceusb2.c | 1119 +++++++++++++++++++++++++++++++++++++
3 files changed, 1127 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/lirc/lirc_mceusb2.c

diff --git a/drivers/input/lirc/Kconfig b/drivers/input/lirc/Kconfig
index 7dbf1a5..0a0b059 100644
--- a/drivers/input/lirc/Kconfig
+++ b/drivers/input/lirc/Kconfig
@@ -25,6 +25,13 @@ config LIRC_MCEUSB
help
Driver for the Microsoft Media Center Ed. Receiver, v1

+config LIRC_MCEUSB2
+ tristate "Microsoft Media Center Ed. Receiver, v2"
+ default n
+ depends on LIRC_DEV
+ help
+ Driver for the Microsoft Media Center Ed. Receiver, v2
+
config LIRC_SERIAL
tristate "Homebrew Serial Port Receiver"
default n
diff --git a/drivers/input/lirc/Makefile b/drivers/input/lirc/Makefile
index fafdd25..f6accb9 100644
--- a/drivers/input/lirc/Makefile
+++ b/drivers/input/lirc/Makefile
@@ -7,4 +7,5 @@ EXTRA_CFLAGS =-DIRCTL_DEV_MAJOR=61 -DLIRC_SERIAL_TRANSMITTER -I$(src)

obj-$(CONFIG_LIRC_DEV) += lirc_dev.o
obj-$(CONFIG_LIRC_MCEUSB) += lirc_mceusb.o
+obj-$(CONFIG_LIRC_MCEUSB2) += lirc_mceusb2.o
obj-$(CONFIG_LIRC_SERIAL) += lirc_serial.o
diff --git a/drivers/input/lirc/lirc_mceusb2.c b/drivers/input/lirc/lirc_mceusb2.c
new file mode 100644
index 0000000..1e683d3
--- /dev/null
+++ b/drivers/input/lirc/lirc_mceusb2.c
@@ -0,0 +1,1119 @@
+/*
+ * LIRC driver for Philips eHome USB Infrared Transceiver
+ * and the Microsoft MCE 2005 Remote Control
+ *
+ * (C) by Martin A. Blatter <martin_a_blatter@xxxxxxxxx>
+ *
+ * Transmitter support and reception code cleanup.
+ * (C) by Daniel Melander <lirc@xxxxxxxxxx>
+ *
+ * Derived from ATI USB driver by Paul Miller and the original
+ * MCE USB driver by Dan Corti
+ *
+ * This driver will only work reliably with kernel version 2.6.10
+ * or higher, probably because of differences in USB device enumeration
+ * in the kernel code. Device initialization fails most of the time
+ * with earlier kernel versions.
+ *
+ **********************************************************************
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/version.h>
+
+#include <linux/autoconf.h>
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/smp_lock.h>
+#include <linux/completion.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/poll.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+
+#include "lirc.h"
+#include "lirc_dev.h"
+
+#define DRIVER_VERSION "1.48"
+#define DRIVER_AUTHOR "Daniel Melander <lirc@xxxxxxxxxx>, " \
+ "Martin Blatter <martin_a_blatter@xxxxxxxxx>"
+#define DRIVER_DESC "Philips eHome USB IR Transceiver and Microsoft " \
+ "MCE 2005 Remote Control driver for LIRC"
+#define DRIVER_NAME "lirc_mceusb2"
+
+#define USB_BUFLEN 16 /* USB reception buffer length */
+#define LIRCBUF_SIZE 256 /* LIRC work buffer length */
+
+/* MCE constants */
+#define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */
+#define MCE_TIME_UNIT 50 /* Approx 50us resolution */
+#define MCE_CODE_LENGTH 5 /* Normal length of packet (with header) */
+#define MCE_PACKET_SIZE 4 /* Normal length of packet (without header) */
+#define MCE_PACKET_HEADER 0x84 /* Actual header format is 0x80 + num_bytes */
+#define MCE_CONTROL_HEADER 0x9F /* MCE status header */
+#define MCE_TX_HEADER_LENGTH 3 /* # of bytes in the initializing tx header */
+#define MCE_MAX_CHANNELS 2 /* Two transmitters, hardware dependent? */
+#define MCE_DEFAULT_TX_MASK 0x03 /* Val opts: TX1=0x01, TX2=0x02, ALL=0x03 */
+#define MCE_PULSE_BIT 0x80 /* Pulse bit, MSB set == PULSE else SPACE */
+#define MCE_PULSE_MASK 0x7F /* Pulse mask */
+#define MCE_MAX_PULSE_LENGTH 0x7F /* Longest transmittable pulse symbol */
+#define MCE_PACKET_LENGTH_MASK 0x7F /* Pulse mask */
+
+
+/* module parameters */
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+#define dprintk(fmt, args...) \
+ do { \
+ if (debug) \
+ printk(KERN_DEBUG fmt, ## args); \
+ } while (0)
+
+/* lock irctl structure */
+#define IRLOCK mutex_lock(&ir->lock)
+#define IRUNLOCK mutex_unlock(&ir->lock)
+
+/* general constants */
+#define SUCCESS 0
+#define SEND_FLAG_IN_PROGRESS 1
+#define SEND_FLAG_COMPLETE 2
+#define RECV_FLAG_IN_PROGRESS 3
+#define RECV_FLAG_COMPLETE 4
+
+#define PHILUSB_INBOUND 1
+#define PHILUSB_OUTBOUND 2
+
+#define VENDOR_PHILIPS 0x0471
+#define VENDOR_SMK 0x0609
+#define VENDOR_TATUNG 0x1460
+#define VENDOR_GATEWAY 0x107b
+#define VENDOR_SHUTTLE 0x1308
+#define VENDOR_SHUTTLE2 0x051c
+#define VENDOR_MITSUMI 0x03ee
+#define VENDOR_TOPSEED 0x1784
+#define VENDOR_RICAVISION 0x179d
+#define VENDOR_ITRON 0x195d
+#define VENDOR_FIC 0x1509
+#define VENDOR_LG 0x043e
+#define VENDOR_MICROSOFT 0x045e
+#define VENDOR_FORMOSA 0x147a
+#define VENDOR_FINTEK 0x1934
+#define VENDOR_PINNACLE 0x2304
+
+static struct usb_device_id usb_remote_table[] = {
+ /* Philips eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
+ /* Philips Infrared Transceiver - HP branded */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x060c) },
+ /* Philips SRM5100 */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x060d) },
+ /* Philips Infrared Transceiver - Omaura */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x060f) },
+ /* SMK/Toshiba G83C0004D410 */
+ { USB_DEVICE(VENDOR_SMK, 0x031d) },
+ /* SMK eHome Infrared Transceiver (Sony VAIO) */
+ { USB_DEVICE(VENDOR_SMK, 0x0322) },
+ /* bundled with Hauppauge PVR-150 */
+ { USB_DEVICE(VENDOR_SMK, 0x0334) },
+ /* Tatung eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TATUNG, 0x9150) },
+ /* Shuttle eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_SHUTTLE, 0xc001) },
+ /* Shuttle eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_SHUTTLE2, 0xc001) },
+ /* Gateway eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_GATEWAY, 0x3009) },
+ /* Mitsumi */
+ { USB_DEVICE(VENDOR_MITSUMI, 0x2501) },
+ /* Topseed eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0001) },
+ /* Topseed HP eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0006) },
+ /* Topseed eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0007) },
+ /* Topseed eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0008) },
+ /* Ricavision internal Infrared Transceiver */
+ { USB_DEVICE(VENDOR_RICAVISION, 0x0010) },
+ /* Itron ione Libra Q-11 */
+ { USB_DEVICE(VENDOR_ITRON, 0x7002) },
+ /* FIC eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_FIC, 0x9242) },
+ /* LG eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_LG, 0x9803) },
+ /* Microsoft MCE Infrared Transceiver */
+ { USB_DEVICE(VENDOR_MICROSOFT, 0x00a0) },
+ /* Formosa eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe015) },
+ /* Formosa21 / eHome Infrared Receiver */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe016) },
+ /* Formosa aim / Trust MCE Infrared Receiver */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe017) },
+ /* Formosa Industrial Computing / Beanbag Emulation Device */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe018) },
+ /* Fintek eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_FINTEK, 0x0602) },
+ /* Pinnacle Remote Kit */
+ { USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
+ /* Terminating entry */
+ { }
+};
+
+static struct usb_device_id pinnacle_list[] = {
+ { USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
+ {}
+};
+
+static struct usb_device_id transmitter_mask_list[] = {
+ { USB_DEVICE(VENDOR_SMK, 0x031d) },
+ { USB_DEVICE(VENDOR_SMK, 0x0322) },
+ { USB_DEVICE(VENDOR_SMK, 0x0334) },
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0001) },
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0007) },
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0008) },
+ { USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
+ {}
+};
+
+/* data structure for each usb remote */
+struct irctl {
+
+ /* usb */
+ struct usb_device *usbdev;
+ struct urb *urb_in;
+ int devnum;
+ struct usb_endpoint_descriptor *usb_ep_in;
+ struct usb_endpoint_descriptor *usb_ep_out;
+
+ /* buffers and dma */
+ unsigned char *buf_in;
+ unsigned int len_in;
+ dma_addr_t dma_in;
+ dma_addr_t dma_out;
+
+ /* lirc */
+ struct lirc_plugin *p;
+ int lircdata;
+ unsigned char is_pulse;
+ struct {
+ u32 connected:1;
+ u32 pinnacle:1;
+ u32 transmitter_mask_inverted:1;
+ u32 reserved:29;
+ } flags;
+
+ unsigned char transmitter_mask;
+ unsigned int carrier_freq;
+
+ /* handle sending (init strings) */
+ int send_flags;
+ wait_queue_head_t wait_out;
+
+ struct mutex lock;
+};
+
+/* init strings */
+static char init1[] = {0x00, 0xff, 0xaa, 0xff, 0x0b};
+static char init2[] = {0xff, 0x18};
+
+static char pin_init1[] = { 0x9f, 0x07};
+static char pin_init2[] = { 0x9f, 0x13};
+static char pin_init3[] = { 0x9f, 0x0d};
+
+static void usb_remote_printdata(struct irctl *ir, char *buf, int len)
+{
+ char codes[USB_BUFLEN*3 + 1];
+ int i;
+
+ if (len <= 0)
+ return;
+
+ for (i = 0; i < len && i < USB_BUFLEN; i++)
+ snprintf(codes+i*3, 4, "%02x ", buf[i] & 0xFF);
+
+ printk(KERN_INFO "" DRIVER_NAME "[%d]: data received %s (length=%d)\n",
+ ir->devnum, codes, len);
+}
+
+static void usb_async_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct irctl *ir;
+ int len;
+
+ if (!urb)
+ return;
+
+ ir = urb->context;
+ if (ir) {
+ len = urb->actual_length;
+
+ dprintk(DRIVER_NAME
+ "[%d]: callback called (status=%d len=%d)\n",
+ ir->devnum, urb->status, len);
+
+ if (debug)
+ usb_remote_printdata(ir, urb->transfer_buffer, len);
+ }
+
+}
+
+
+/* request incoming or send outgoing usb packet - used to initialize remote */
+static void request_packet_async(struct irctl *ir,
+ struct usb_endpoint_descriptor *ep,
+ unsigned char *data, int size, int urb_type)
+{
+ int res;
+ struct urb *async_urb;
+ unsigned char *async_buf;
+
+ if (urb_type) {
+ async_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (async_urb) {
+ /* alloc buffer */
+ async_buf = kmalloc(size, GFP_KERNEL);
+ if (async_buf) {
+ if (urb_type == PHILUSB_OUTBOUND) {
+ /* outbound data */
+ usb_fill_int_urb(async_urb, ir->usbdev,
+ usb_sndintpipe(ir->usbdev,
+ ep->bEndpointAddress),
+ async_buf,
+ size,
+ (usb_complete_t) usb_async_callback,
+ ir, ep->bInterval);
+
+ memcpy(async_buf, data, size);
+ } else {
+ /* inbound data */
+ usb_fill_int_urb(async_urb, ir->usbdev,
+ usb_rcvintpipe(ir->usbdev,
+ ep->bEndpointAddress),
+ async_buf, size,
+ (usb_complete_t) usb_async_callback,
+ ir, ep->bInterval);
+ }
+ } else {
+ usb_free_urb(async_urb);
+ return;
+ }
+ }
+ } else {
+ /* standard request */
+ async_urb = ir->urb_in;
+ ir->send_flags = RECV_FLAG_IN_PROGRESS;
+ }
+ dprintk(DRIVER_NAME "[%d]: receive request called (size=%#x)\n",
+ ir->devnum, size);
+
+ async_urb->transfer_buffer_length = size;
+ async_urb->dev = ir->usbdev;
+
+ res = usb_submit_urb(async_urb, GFP_ATOMIC);
+ if (res) {
+ dprintk(DRIVER_NAME "[%d]: receive request FAILED! (res=%d)\n",
+ ir->devnum, res);
+ return;
+ }
+ dprintk(DRIVER_NAME "[%d]: receive request complete (res=%d)\n",
+ ir->devnum, res);
+}
+
+static int unregister_from_lirc(struct irctl *ir)
+{
+ struct lirc_plugin *p = ir->p;
+ int devnum;
+ int rtn;
+
+ devnum = ir->devnum;
+ dprintk(DRIVER_NAME "[%d]: unregister from lirc called\n", devnum);
+
+ rtn = lirc_unregister_plugin(p->minor);
+ if (rtn > 0) {
+ printk(DRIVER_NAME "[%d]: error in lirc_unregister minor: %d\n"
+ "Trying again...\n", devnum, p->minor);
+ if (rtn == -EBUSY) {
+ printk(DRIVER_NAME
+ "[%d]: device is opened, will unregister"
+ " on close\n", devnum);
+ return -EAGAIN;
+ }
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+
+ rtn = lirc_unregister_plugin(p->minor);
+ if (rtn > 0)
+ printk(DRIVER_NAME "[%d]: lirc_unregister failed\n",
+ devnum);
+ }
+
+ if (rtn != SUCCESS) {
+ printk(DRIVER_NAME "[%d]: didn't free resources\n", devnum);
+ return -EAGAIN;
+ }
+
+ printk(DRIVER_NAME "[%d]: usb remote disconnected\n", devnum);
+
+ lirc_buffer_free(p->rbuf);
+ kfree(p->rbuf);
+ kfree(p);
+ kfree(ir);
+ return SUCCESS;
+}
+
+static int set_use_inc(void *data)
+{
+ struct irctl *ir = data;
+
+ if (!ir) {
+ printk(DRIVER_NAME "[?]: set_use_inc called with no context\n");
+ return -EIO;
+ }
+ dprintk(DRIVER_NAME "[%d]: set use inc\n", ir->devnum);
+
+ if (!ir->flags.connected) {
+ if (!ir->usbdev)
+ return -ENOENT;
+ ir->flags.connected = 1;
+ }
+
+ return SUCCESS;
+}
+
+static void set_use_dec(void *data)
+{
+ struct irctl *ir = data;
+
+ if (!ir) {
+ printk(DRIVER_NAME "[?]: set_use_dec called with no context\n");
+ return;
+ }
+ dprintk(DRIVER_NAME "[%d]: set use dec\n", ir->devnum);
+
+ if (ir->flags.connected) {
+ IRLOCK;
+ ir->flags.connected = 0;
+ IRUNLOCK;
+ }
+}
+
+static void send_packet_to_lirc(struct irctl *ir)
+{
+ if (ir->lircdata != 0) {
+ lirc_buffer_write_1(ir->p->rbuf,
+ (unsigned char *) &ir->lircdata);
+ wake_up(&ir->p->rbuf->wait_poll);
+ ir->lircdata = 0;
+ }
+}
+
+static void usb_remote_recv(struct urb *urb, struct pt_regs *regs)
+{
+ struct irctl *ir;
+ int buf_len, packet_len;
+ int i, j;
+
+ if (!urb)
+ return;
+
+ ir = urb->context;
+ if (!ir) {
+ usb_unlink_urb(urb);
+ return;
+ }
+
+ buf_len = urb->actual_length;
+ packet_len = 0;
+
+ if (debug)
+ usb_remote_printdata(ir, urb->transfer_buffer, buf_len);
+
+ if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
+ ir->send_flags = SEND_FLAG_COMPLETE;
+ dprintk(DRIVER_NAME "[%d]: setup answer received %d bytes\n",
+ ir->devnum, buf_len);
+ }
+
+ switch (urb->status) {
+ /* success */
+ case SUCCESS:
+ for (i = 0; i < buf_len; i++) {
+ /* decode mce packets of the form (84),AA,BB,CC,DD */
+ switch (ir->buf_in[i]) {
+
+ /* data headers */
+ case 0x90: /* used Pinnacle Remote Kit */
+ case 0x8F:
+ case 0x8E:
+ case 0x8D:
+ case 0x8C:
+ case 0x8B:
+ case 0x8A:
+ case 0x89:
+ case 0x88:
+ case 0x87:
+ case 0x86:
+ case 0x85:
+ case 0x84:
+ case 0x83:
+ case 0x82:
+ case 0x81:
+ case 0x80:
+ /* decode packet data */
+ packet_len = ir->buf_in[i] &
+ MCE_PACKET_LENGTH_MASK;
+ for (j = 1;
+ j <= packet_len && (i+j < buf_len);
+ j++) {
+ /* rising/falling flank */
+ if (ir->is_pulse !=
+ (ir->buf_in[i + j] &
+ MCE_PULSE_BIT)) {
+ send_packet_to_lirc(ir);
+ ir->is_pulse =
+ ir->buf_in[i + j] &
+ MCE_PULSE_BIT;
+ }
+
+ /* accumulate mce pulse/space values */
+ ir->lircdata +=
+ (ir->buf_in[i + j] &
+ MCE_PULSE_MASK)*MCE_TIME_UNIT;
+ ir->lircdata |=
+ (ir->is_pulse ? PULSE_BIT : 0);
+ }
+
+ i += packet_len;
+ break;
+
+ /* status header (0x9F) */
+ case MCE_CONTROL_HEADER:
+ /* A transmission containing one or
+ more consecutive ir commands always
+ ends with a GAP of 100ms followed by the
+ sequence 0x9F 0x01 0x01 0x9F 0x15
+ 0x00 0x00 0x80 */
+
+ /*
+ Uncomment this if the last 100ms
+ "infinity"-space should be transmitted
+ to lirc directly instead of at the beginning
+ of the next transmission. Changes pulse/space order.
+
+ if (++i < buf_len && ir->buf_in[i]==0x01)
+ send_packet_to_lirc(ir);
+
+ */
+
+ /* end decode loop */
+ i = buf_len;
+ break;
+ default:
+ break;
+ }
+ }
+
+ break;
+
+ /* unlink */
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ usb_unlink_urb(urb);
+ return;
+
+ case -EPIPE:
+ default:
+ break;
+ }
+
+ /* resubmit urb */
+ usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+
+static ssize_t lirc_write(struct file *file, const char *buf,
+ size_t n, loff_t *ppos)
+{
+ int i, count = 0, cmdcount = 0;
+ struct irctl *ir = NULL;
+ int wbuf[LIRCBUF_SIZE]; /* Workbuffer with values from lirc */
+ unsigned char cmdbuf[MCE_CMDBUF_SIZE]; /* MCE command buffer */
+ unsigned long signal_duration = 0; /* Singnal length in us */
+ struct timeval start_time, end_time;
+
+ do_gettimeofday(&start_time);
+
+ /* Retrieve lirc_plugin data for the device */
+ ir = lirc_get_pdata(file);
+ if (!ir && !ir->usb_ep_out)
+ return -EFAULT;
+
+ if (n % sizeof(int))
+ return -EINVAL;
+ count = n / sizeof(int);
+
+ /* Check if command is within limits */
+ if (count > LIRCBUF_SIZE || count%2 == 0)
+ return -EINVAL;
+ if (copy_from_user(wbuf, buf, n))
+ return -EFAULT;
+
+ /* MCE tx init header */
+ cmdbuf[cmdcount++] = MCE_CONTROL_HEADER;
+ cmdbuf[cmdcount++] = 0x08;
+ cmdbuf[cmdcount++] = ir->transmitter_mask;
+
+ /* Generate mce packet data */
+ for (i = 0; (i < count) && (cmdcount < MCE_CMDBUF_SIZE); i++) {
+ signal_duration += wbuf[i];
+ wbuf[i] = wbuf[i] / MCE_TIME_UNIT;
+
+ do { /* loop to support long pulses/spaces > 127*50us=6.35ms */
+
+ /* Insert mce packet header every 4th entry */
+ if ((cmdcount < MCE_CMDBUF_SIZE) &&
+ (cmdcount - MCE_TX_HEADER_LENGTH) %
+ MCE_CODE_LENGTH == 0)
+ cmdbuf[cmdcount++] = MCE_PACKET_HEADER;
+
+ /* Insert mce packet data */
+ if (cmdcount < MCE_CMDBUF_SIZE)
+ cmdbuf[cmdcount++] =
+ (wbuf[i] < MCE_PULSE_BIT ?
+ wbuf[i] : MCE_MAX_PULSE_LENGTH) |
+ (i & 1 ? 0x00 : MCE_PULSE_BIT);
+ else
+ return -EINVAL;
+ } while ((wbuf[i] > MCE_MAX_PULSE_LENGTH) &&
+ (wbuf[i] -= MCE_MAX_PULSE_LENGTH));
+ }
+
+ /* Fix packet length in last header */
+ cmdbuf[cmdcount - (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH] =
+ 0x80 + (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH - 1;
+
+ /* Check if we have room for the empty packet at the end */
+ if (cmdcount >= MCE_CMDBUF_SIZE)
+ return -EINVAL;
+
+ /* All mce commands end with an empty packet (0x80) */
+ cmdbuf[cmdcount++] = 0x80;
+
+ /* Transmit the command to the mce device */
+ request_packet_async(ir, ir->usb_ep_out, cmdbuf,
+ cmdcount, PHILUSB_OUTBOUND);
+
+ /* The lircd gap calculation expects the write function to
+ wait the time it takes for the ircommand to be sent before
+ it returns. */
+ do_gettimeofday(&end_time);
+ signal_duration -= (end_time.tv_usec - start_time.tv_usec) +
+ (end_time.tv_sec - start_time.tv_sec) * 1000000;
+
+ /* delay with the closest number of ticks */
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(usecs_to_jiffies(signal_duration));
+
+ return n;
+}
+
+static void set_transmitter_mask(struct irctl *ir, unsigned int mask)
+{
+ if (ir->flags.transmitter_mask_inverted)
+ ir->transmitter_mask = (mask != 0x03 ? mask ^ 0x03 : mask) << 1;
+ else
+ ir->transmitter_mask = mask;
+}
+
+
+/* Sets the send carrier frequency */
+static int set_send_carrier(struct irctl *ir, int carrier)
+{
+ int clk = 10000000;
+ int prescaler = 0, divisor = 0;
+ unsigned char cmdbuf[] = { 0x9F, 0x06, 0x01, 0x80 };
+
+ /* Carrier is changed */
+ if (ir->carrier_freq != carrier) {
+
+ if (carrier <= 0) {
+ ir->carrier_freq = carrier;
+ dprintk(DRIVER_NAME "[%d]: SET_CARRIER disabling "
+ "carrier modulation\n", ir->devnum);
+ request_packet_async(ir, ir->usb_ep_out,
+ cmdbuf, sizeof(cmdbuf),
+ PHILUSB_OUTBOUND);
+ return carrier;
+ }
+
+ for (prescaler = 0; prescaler < 4; ++prescaler) {
+ divisor = (clk >> (2 * prescaler)) / carrier;
+ if (divisor <= 0xFF) {
+ ir->carrier_freq = carrier;
+ cmdbuf[2] = prescaler;
+ cmdbuf[3] = divisor;
+ dprintk(DRIVER_NAME "[%d]: SET_CARRIER "
+ "requesting %d Hz\n",
+ ir->devnum, carrier);
+
+ /* Transmit the new carrier to the mce
+ device */
+ request_packet_async(ir, ir->usb_ep_out,
+ cmdbuf, sizeof(cmdbuf),
+ PHILUSB_OUTBOUND);
+ return carrier;
+ }
+ }
+
+ return -EINVAL;
+
+ }
+
+ return carrier;
+}
+
+
+static int lirc_ioctl(struct inode *node, struct file *filep,
+ unsigned int cmd, unsigned long arg)
+{
+ int result;
+ unsigned int ivalue;
+ unsigned long lvalue;
+ struct irctl *ir = NULL;
+
+ /* Retrieve lirc_plugin data for the device */
+ ir = lirc_get_pdata(filep);
+ if (!ir && !ir->usb_ep_out)
+ return -EFAULT;
+
+
+ switch (cmd) {
+ case LIRC_SET_TRANSMITTER_MASK:
+
+ result = get_user(ivalue, (unsigned int *) arg);
+ if (result)
+ return result;
+ switch (ivalue) {
+ case 0x01: /* Transmitter 1 => 0x04 */
+ case 0x02: /* Transmitter 2 => 0x02 */
+ case 0x03: /* Transmitter 1 & 2 => 0x06 */
+ set_transmitter_mask(ir, ivalue);
+ break;
+
+ default: /* Unsupported transmitter mask */
+ return MCE_MAX_CHANNELS;
+ }
+
+ dprintk(DRIVER_NAME ": SET_TRANSMITTERS mask=%d\n", ivalue);
+ break;
+
+ case LIRC_GET_SEND_MODE:
+
+ result = put_user(LIRC_SEND2MODE(LIRC_CAN_SEND_PULSE &
+ LIRC_CAN_SEND_MASK),
+ (unsigned long *) arg);
+
+ if (result)
+ return result;
+ break;
+
+ case LIRC_SET_SEND_MODE:
+
+ result = get_user(lvalue, (unsigned long *) arg);
+
+ if (result)
+ return result;
+ if (lvalue != (LIRC_MODE_PULSE&LIRC_CAN_SEND_MASK))
+ return -EINVAL;
+ break;
+
+ case LIRC_SET_SEND_CARRIER:
+
+ result = get_user(ivalue, (unsigned int *) arg);
+ if (result)
+ return result;
+
+ set_send_carrier(ir, ivalue);
+ break;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+
+ return 0;
+}
+
+static struct file_operations lirc_fops = {
+ .write = lirc_write,
+};
+
+
+static int usb_remote_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_host_interface *idesc;
+ struct usb_endpoint_descriptor *ep = NULL;
+ struct usb_endpoint_descriptor *ep_in = NULL;
+ struct usb_endpoint_descriptor *ep_out = NULL;
+ struct usb_host_config *config;
+ struct irctl *ir = NULL;
+ struct lirc_plugin *plugin = NULL;
+ struct lirc_buffer *rbuf = NULL;
+ int devnum, pipe, maxp;
+ int minor = 0;
+ int i;
+ char buf[63], name[128] = "";
+ int mem_failure = 0;
+ int is_pinnacle;
+
+ dprintk(DRIVER_NAME ": usb probe called\n");
+
+ usb_reset_device(dev);
+
+ config = dev->actconfig;
+
+ idesc = intf->cur_altsetting;
+
+ is_pinnacle = usb_match_id(intf, pinnacle_list) ? 1 : 0;
+
+ /* step through the endpoints to find first bulk in and out endpoint */
+ for (i = 0; i < idesc->desc.bNumEndpoints; ++i) {
+ ep = &idesc->endpoint[i].desc;
+
+ if ((ep_in == NULL)
+ && ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_IN)
+ && (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_BULK)
+ || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_INT))) {
+
+ dprintk(DRIVER_NAME ": acceptable inbound endpoint "
+ "found\n");
+ ep_in = ep;
+ ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
+ if (is_pinnacle)
+ /*
+ * setting seems to 1 seem to cause issues with
+ * Pinnacle timing out on transfer.
+ */
+ ep_in->bInterval = ep->bInterval;
+ else
+ ep_in->bInterval = 1;
+ }
+
+ if ((ep_out == NULL)
+ && ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_OUT)
+ && (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_BULK)
+ || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_INT))) {
+
+ dprintk(DRIVER_NAME ": acceptable outbound endpoint "
+ "found\n");
+ ep_out = ep;
+ ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
+ if (is_pinnacle)
+ /*
+ * setting seems to 1 seem to cause issues with
+ * Pinnacle timing out on transfer.
+ */
+ ep_out->bInterval = ep->bInterval;
+ else
+ ep_out->bInterval = 1;
+ }
+ }
+ if (ep_in == NULL) {
+ dprintk(DRIVER_NAME ": inbound and/or endpoint not found\n");
+ return -ENODEV;
+ }
+
+ devnum = dev->devnum;
+ pipe = usb_rcvintpipe(dev, ep_in->bEndpointAddress);
+ maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+ /* allocate kernel memory */
+ mem_failure = 0;
+ ir = kmalloc(sizeof(struct irctl), GFP_KERNEL);
+ if (!ir) {
+ mem_failure = 1;
+ goto mem_failure_switch;
+ }
+
+ memset(ir, 0, sizeof(struct irctl));
+
+ plugin = kmalloc(sizeof(struct lirc_plugin), GFP_KERNEL);
+ if (!plugin) {
+ mem_failure = 2;
+ goto mem_failure_switch;
+ }
+
+ rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+ if (!rbuf) {
+ mem_failure = 3;
+ goto mem_failure_switch;
+ }
+
+ if (lirc_buffer_init(rbuf, sizeof(int), LIRCBUF_SIZE)) {
+ mem_failure = 4;
+ goto mem_failure_switch;
+ }
+
+ ir->buf_in = usb_buffer_alloc(dev, maxp, GFP_ATOMIC, &ir->dma_in);
+ if (!ir->buf_in) {
+ mem_failure = 5;
+ goto mem_failure_switch;
+ }
+
+ ir->urb_in = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ir->urb_in) {
+ mem_failure = 7;
+ goto mem_failure_switch;
+ }
+
+ memset(plugin, 0, sizeof(struct lirc_plugin));
+
+ strcpy(plugin->name, DRIVER_NAME " ");
+ plugin->minor = -1;
+ plugin->features = LIRC_CAN_SEND_PULSE |
+ LIRC_CAN_SET_TRANSMITTER_MASK |
+ LIRC_CAN_REC_MODE2 |
+ LIRC_CAN_SET_SEND_CARRIER;
+ plugin->data = ir;
+ plugin->rbuf = rbuf;
+ plugin->set_use_inc = &set_use_inc;
+ plugin->set_use_dec = &set_use_dec;
+ plugin->code_length = sizeof(int) * 8;
+ plugin->ioctl = lirc_ioctl;
+ plugin->fops = &lirc_fops;
+ plugin->dev = &dev->dev;
+ plugin->owner = THIS_MODULE;
+
+ mutex_init(&ir->lock);
+ init_waitqueue_head(&ir->wait_out);
+
+ minor = lirc_register_plugin(plugin);
+ if (minor < 0)
+ mem_failure = 9;
+
+mem_failure_switch:
+
+ /* free allocated memory incase of failure */
+ switch (mem_failure) {
+ case 9:
+ usb_free_urb(ir->urb_in);
+ case 7:
+ usb_buffer_free(dev, maxp, ir->buf_in, ir->dma_in);
+ case 5:
+ lirc_buffer_free(rbuf);
+ case 4:
+ kfree(rbuf);
+ case 3:
+ kfree(plugin);
+ case 2:
+ kfree(ir);
+ case 1:
+ printk(DRIVER_NAME "[%d]: out of memory (code=%d)\n",
+ devnum, mem_failure);
+ return -ENOMEM;
+ }
+
+ plugin->minor = minor;
+ ir->p = plugin;
+ ir->devnum = devnum;
+ ir->usbdev = dev;
+ ir->len_in = maxp;
+ ir->flags.connected = 0;
+ ir->flags.pinnacle = is_pinnacle;
+ ir->flags.transmitter_mask_inverted =
+ usb_match_id(intf, transmitter_mask_list) ? 0 : 1;
+
+ ir->lircdata = PULSE_MASK;
+ ir->is_pulse = 0;
+
+ /* ir->flags.transmitter_mask_inverted must be set */
+ set_transmitter_mask(ir, MCE_DEFAULT_TX_MASK);
+ /* Saving usb interface data for use by the transmitter routine */
+ ir->usb_ep_in = ep_in;
+ ir->usb_ep_out = ep_out;
+
+ if (dev->descriptor.iManufacturer
+ && usb_string(dev, dev->descriptor.iManufacturer, buf, 63) > 0)
+ strncpy(name, buf, 128);
+ if (dev->descriptor.iProduct
+ && usb_string(dev, dev->descriptor.iProduct, buf, 63) > 0)
+ snprintf(name, 128, "%s %s", name, buf);
+ printk(DRIVER_NAME "[%d]: %s on usb%d:%d\n", devnum, name,
+ dev->bus->busnum, devnum);
+
+ /* inbound data */
+ usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in,
+ maxp, (usb_complete_t) usb_remote_recv, ir, ep_in->bInterval);
+
+ /* initialize device */
+ if (ir->flags.pinnacle) {
+ int usbret;
+
+ /*
+ * I have no idea why but this reset seems to be crucial to
+ * getting the device to do outbound IO correctly - without
+ * this the device seems to hang, ignoring all input - although
+ * IR signals are correctly sent from the device, no input is
+ * interpreted by the device and the host never does the
+ * completion routine
+ */
+
+ usbret = usb_reset_configuration(dev);
+ printk(DRIVER_NAME "[%d]: usb reset config ret %x\n",
+ devnum, usbret);
+
+ /*
+ * its possible we really should wait for a return
+ * for each of these...
+ */
+ request_packet_async(ir, ep_in, NULL, maxp, PHILUSB_INBOUND);
+ request_packet_async(ir, ep_out, pin_init1, sizeof(pin_init1),
+ PHILUSB_OUTBOUND);
+ request_packet_async(ir, ep_in, NULL, maxp, PHILUSB_INBOUND);
+ request_packet_async(ir, ep_out, pin_init2, sizeof(pin_init2),
+ PHILUSB_OUTBOUND);
+ request_packet_async(ir, ep_in, NULL, maxp, PHILUSB_INBOUND);
+ request_packet_async(ir, ep_out, pin_init3, sizeof(pin_init3),
+ PHILUSB_OUTBOUND);
+ /* if we dont issue the correct number of receives
+ * (PHILUSB_INBOUND) for each outbound, then the first few ir
+ * pulses will be interpreted by the usb_async_callback routine
+ * - we should ensure we have the right amount OR less - as the
+ * usb_remote_recv routine will handle the control packets OK -
+ * they start with 0x9f - but the async callback doesnt handle
+ * ir pulse packets
+ */
+ request_packet_async(ir, ep_in, NULL, maxp, 0);
+ } else {
+ request_packet_async(ir, ep_in, NULL, maxp, PHILUSB_INBOUND);
+ request_packet_async(ir, ep_in, NULL, maxp, PHILUSB_INBOUND);
+ request_packet_async(ir, ep_out, init1,
+ sizeof(init1), PHILUSB_OUTBOUND);
+ request_packet_async(ir, ep_in, NULL, maxp, PHILUSB_INBOUND);
+ request_packet_async(ir, ep_out, init2,
+ sizeof(init2), PHILUSB_OUTBOUND);
+ request_packet_async(ir, ep_in, NULL, maxp, 0);
+ }
+
+ usb_set_intfdata(intf, ir);
+
+ return SUCCESS;
+}
+
+
+static void usb_remote_disconnect(struct usb_interface *intf)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct irctl *ir = usb_get_intfdata(intf);
+
+ usb_set_intfdata(intf, NULL);
+
+ if (!ir || !ir->p)
+ return;
+
+ ir->usbdev = NULL;
+ wake_up_all(&ir->wait_out);
+
+ IRLOCK;
+ usb_kill_urb(ir->urb_in);
+ usb_free_urb(ir->urb_in);
+ usb_buffer_free(dev, ir->len_in, ir->buf_in, ir->dma_in);
+ IRUNLOCK;
+
+ unregister_from_lirc(ir);
+}
+
+static int usb_remote_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct irctl *ir = usb_get_intfdata(intf);
+ printk(DRIVER_NAME "[%d]: suspend\n", ir->devnum);
+ usb_kill_urb(ir->urb_in);
+ return 0;
+}
+
+static int usb_remote_resume(struct usb_interface *intf)
+{
+ struct irctl *ir = usb_get_intfdata(intf);
+ printk(DRIVER_NAME "[%d]: resume\n", ir->devnum);
+ if (usb_submit_urb(ir->urb_in, GFP_ATOMIC))
+ return -EIO;
+ return 0;
+}
+
+static struct usb_driver usb_remote_driver = {
+ .name = DRIVER_NAME,
+ .probe = usb_remote_probe,
+ .disconnect = usb_remote_disconnect,
+ .suspend = usb_remote_suspend,
+ .resume = usb_remote_resume,
+ .id_table = usb_remote_table
+};
+
+#ifdef MODULE
+static int __init usb_remote_init(void)
+{
+ int i;
+
+ printk(KERN_INFO "\n");
+ printk(KERN_INFO DRIVER_NAME ": " DRIVER_DESC " " DRIVER_VERSION "\n");
+ printk(KERN_INFO DRIVER_NAME ": " DRIVER_AUTHOR "\n");
+ dprintk(DRIVER_NAME ": debug mode enabled\n");
+
+ request_module("lirc_dev");
+
+ i = usb_register(&usb_remote_driver);
+ if (i < 0) {
+ printk(DRIVER_NAME ": usb register failed, result = %d\n", i);
+ return -ENODEV;
+ }
+
+ return SUCCESS;
+}
+
+static void __exit usb_remote_exit(void)
+{
+ usb_deregister(&usb_remote_driver);
+}
+
+module_init(usb_remote_init);
+module_exit(usb_remote_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, usb_remote_table);
+
+module_param(debug, bool, 0644);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+#endif /* MODULE */
--
1.6.0.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Relevant Pages

  • [PATCH 13/18] lirc driver for ITE8709 CIR port receiver
    ... Driver for the Soundgraph IMON IR Receiver ... * General Public License for more details. ... +* between the host CPU and the CIR module. ...
    (Linux-Kernel)
  • Re: No eHome Infrared Transcever driver
    ... It is probably not compatible with MCE, you need to attach an actual MCE IR receiver via USB to the PC. ... Where to find the driver for the eHome Infrared Transceiver. ... MCE remote does not work and WinXP MCE 2005 Device Manger puts the ...
    (microsoft.public.windows.mediacenter)
  • Re: TrueTime refclock Users?
    ... Yes, the driver appears to walk-through several old TrueTime devices, some ... receiver will not work ... when dealing with a clock it doesn't know about. ...
    (comp.protocols.time.ntp)
  • [PATCH 12/18] lirc driver for the Sasem OnAir and Dign HV5 receivers
    ... Driver for the Microsoft Media Center Ed. Receiver, ... * Callback function for USB core API: ...
    (Linux-Kernel)
  • Re: DirecTV and MCE 2005
    ... >I'm considering purchasing MCE 2005, but had a few questions with how the MCE ... >computer connects with my DirecTV receiver. ... >3) How do I take advantage of multiple tuners? ...
    (microsoft.public.windows.mediacenter)