Re: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
- From: Tejun Heo <htejun@xxxxxxxxx>
- Date: Wed, 08 Oct 2008 08:59:51 +0900
Linda Walsh wrote:
Tejun Heo wrote:
Linda Walsh wrote:----
Controller is a Promise TX4/300
Yeap. After the drive goes offline, does unplugging and replugging
the power cable to the harddrive makes it come back?
No. It hangs the computer. about 2-3 seconds after plugging the
drives back in. Did it twice to verify it wasn't a fluke. Verified
drives removed from /dev, then
plugged them back in -- was able to do about 1-2 ls commands on /dev, then
keyboard goes dead.
First time I tried unplugging the power cables and replugging --
that hung...
2nd time tried unplugging a sata cable and replugging -- that hung too.
Ah.. okay, so the controller went bonkers then. Any chance you can
shell out ~15 bucks and try a sil SATA controller?
Hopefully you won't need any more tests of this exact nature...? :-)
Wasn't it fun and empowering? :-P
--
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Follow-Ups:
- re: Promise SATA-standby +selftest=hungdrive; Sil works...
- From: Linda Walsh
- re: Promise SATA-standby +selftest=hungdrive; Sil works...
- References:
- Re: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
- From: Linda Walsh
- Re: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
- From: Tejun Heo
- Re: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
- From: Linda Walsh
- Re: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
- From: Tejun Heo
- Re: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
- From: Linda Walsh
- Re: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
- Prev by Date: Re: [ANNOUNCE]: ConfigFS enabled Generic Target Mode and iSCSI Target Stack on v2.6.27-rc7
- Next by Date: Re: [RFC] Normalizing byteorder/unaligned access API
- Previous by thread: Re: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
- Next by thread: re: Promise SATA-standby +selftest=hungdrive; Sil works...
- Index(es):
Relevant Pages
|