[PATCH 29/42] Staging: Clean up sxg driver

From: J.R. Mauro <jrm8005@xxxxxxxxx>

Lindent the rest of the files in drivers/staging/sxg

Signed off by: J.R. Mauro <jrm8005@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/staging/sxg/sxg_os.h | 41 ++---
drivers/staging/sxg/sxghif.h | 410 +++++++++++++++++++-------------------
drivers/staging/sxg/sxghw.h | 284 +++++++++++++-------------
drivers/staging/sxg/sxgphycode.h | 12 +-
4 files changed, 368 insertions(+), 379 deletions(-)

diff --git a/drivers/staging/sxg/sxg_os.h b/drivers/staging/sxg/sxg_os.h
index 26fb0ff..0118268 100644
--- a/drivers/staging/sxg/sxg_os.h
+++ b/drivers/staging/sxg/sxg_os.h
@@ -44,7 +44,6 @@
#define FALSE (0)
#define TRUE (1)

-
typedef struct _LIST_ENTRY {
struct _LIST_ENTRY *nle_flink;
struct _LIST_ENTRY *nle_blink;
@@ -69,35 +68,32 @@ typedef struct _LIST_ENTRY {

/* These two have to be inlined since they return things. */

-static __inline PLIST_ENTRY
-RemoveHeadList(list_entry *l)
+static __inline PLIST_ENTRY RemoveHeadList(list_entry * l)
{
- list_entry *f;
- list_entry *e;
+ list_entry *f;
+ list_entry *e;

- e = l->nle_flink;
- f = e->nle_flink;
- l->nle_flink = f;
- f->nle_blink = l;
+ e = l->nle_flink;
+ f = e->nle_flink;
+ l->nle_flink = f;
+ f->nle_blink = l;

- return (e);
+ return (e);
}

-static __inline PLIST_ENTRY
-RemoveTailList(list_entry *l)
+static __inline PLIST_ENTRY RemoveTailList(list_entry * l)
{
- list_entry *b;
- list_entry *e;
+ list_entry *b;
+ list_entry *e;

- e = l->nle_blink;
- b = e->nle_blink;
- l->nle_blink = b;
- b->nle_flink = l;
+ e = l->nle_blink;
+ b = e->nle_blink;
+ l->nle_blink = b;
+ b->nle_flink = l;

- return (e);
+ return (e);
}

-
#define InsertTailList(l, e) \
do { \
list_entry *b; \
@@ -120,7 +116,6 @@ RemoveTailList(list_entry *l)
(l)->nle_flink = (e); \
} while (0)

-
#define ATK_DEBUG 1

#if ATK_DEBUG
@@ -133,7 +128,6 @@ RemoveTailList(list_entry *l)
#define SLIC_TIMESTAMP(value)
#endif

-
/****************** SXG DEFINES *****************************************/

#ifdef ATKDBG
@@ -150,5 +144,4 @@ RemoveTailList(list_entry *l)
#define WRITE_REG64(a,reg,value,cpu) sxg_reg64_write((a),(&reg),(value),(cpu))
#define READ_REG(reg,value) (value) = readl((void __iomem *)(&reg))

-#endif /* _SLIC_OS_SPECIFIC_H_ */
-
+#endif /* _SLIC_OS_SPECIFIC_H_ */
diff --git a/drivers/staging/sxg/sxghif.h b/drivers/staging/sxg/sxghif.h
index ed26cea..88bffba 100644
--- a/drivers/staging/sxg/sxghif.h
+++ b/drivers/staging/sxg/sxghif.h
@@ -14,119 +14,119 @@
*******************************************************************************/
typedef struct _SXG_UCODE_REGS {
// Address 0 - 0x3F = Command codes 0-15 for TCB 0. Excode 0
- u32 Icr; // Code = 0 (extended), ExCode = 0 - Int control
- u32 RsvdReg1; // Code = 1 - TOE -NA
- u32 RsvdReg2; // Code = 2 - TOE -NA
- u32 RsvdReg3; // Code = 3 - TOE -NA
- u32 RsvdReg4; // Code = 4 - TOE -NA
- u32 RsvdReg5; // Code = 5 - TOE -NA
- u32 CardUp; // Code = 6 - Microcode initialized when 1
- u32 RsvdReg7; // Code = 7 - TOE -NA
- u32 CodeNotUsed[8]; // Codes 8-15 not used. ExCode = 0
+ u32 Icr; // Code = 0 (extended), ExCode = 0 - Int control
+ u32 RsvdReg1; // Code = 1 - TOE -NA
+ u32 RsvdReg2; // Code = 2 - TOE -NA
+ u32 RsvdReg3; // Code = 3 - TOE -NA
+ u32 RsvdReg4; // Code = 4 - TOE -NA
+ u32 RsvdReg5; // Code = 5 - TOE -NA
+ u32 CardUp; // Code = 6 - Microcode initialized when 1
+ u32 RsvdReg7; // Code = 7 - TOE -NA
+ u32 CodeNotUsed[8]; // Codes 8-15 not used. ExCode = 0
// This brings us to ExCode 1 at address 0x40 = Interrupt status pointer
- u32 Isp; // Code = 0 (extended), ExCode = 1
- u32 PadEx1[15]; // Codes 1-15 not used with extended codes
+ u32 Isp; // Code = 0 (extended), ExCode = 1
+ u32 PadEx1[15]; // Codes 1-15 not used with extended codes
// ExCode 2 = Interrupt Status Register
- u32 Isr; // Code = 0 (extended), ExCode = 2
- u32 PadEx2[15];
+ u32 Isr; // Code = 0 (extended), ExCode = 2
+ u32 PadEx2[15];
// ExCode 3 = Event base register. Location of event rings
- u32 EventBase; // Code = 0 (extended), ExCode = 3
- u32 PadEx3[15];
+ u32 EventBase; // Code = 0 (extended), ExCode = 3
+ u32 PadEx3[15];
// ExCode 4 = Event ring size
- u32 EventSize; // Code = 0 (extended), ExCode = 4
- u32 PadEx4[15];
+ u32 EventSize; // Code = 0 (extended), ExCode = 4
+ u32 PadEx4[15];
// ExCode 5 = TCB Buffers base address
- u32 TcbBase; // Code = 0 (extended), ExCode = 5
- u32 PadEx5[15];
+ u32 TcbBase; // Code = 0 (extended), ExCode = 5
+ u32 PadEx5[15];
// ExCode 6 = TCB Composite Buffers base address
- u32 TcbCompBase; // Code = 0 (extended), ExCode = 6
- u32 PadEx6[15];
+ u32 TcbCompBase; // Code = 0 (extended), ExCode = 6
+ u32 PadEx6[15];
// ExCode 7 = Transmit ring base address
- u32 XmtBase; // Code = 0 (extended), ExCode = 7
- u32 PadEx7[15];
+ u32 XmtBase; // Code = 0 (extended), ExCode = 7
+ u32 PadEx7[15];
// ExCode 8 = Transmit ring size
- u32 XmtSize; // Code = 0 (extended), ExCode = 8
- u32 PadEx8[15];
+ u32 XmtSize; // Code = 0 (extended), ExCode = 8
+ u32 PadEx8[15];
// ExCode 9 = Receive ring base address
- u32 RcvBase; // Code = 0 (extended), ExCode = 9
- u32 PadEx9[15];
+ u32 RcvBase; // Code = 0 (extended), ExCode = 9
+ u32 PadEx9[15];
// ExCode 10 = Receive ring size
- u32 RcvSize; // Code = 0 (extended), ExCode = 10
- u32 PadEx10[15];
+ u32 RcvSize; // Code = 0 (extended), ExCode = 10
+ u32 PadEx10[15];
// ExCode 11 = Read EEPROM Config
- u32 Config; // Code = 0 (extended), ExCode = 11
- u32 PadEx11[15];
+ u32 Config; // Code = 0 (extended), ExCode = 11
+ u32 PadEx11[15];
// ExCode 12 = Multicast bits 31:0
- u32 McastLow; // Code = 0 (extended), ExCode = 12
- u32 PadEx12[15];
+ u32 McastLow; // Code = 0 (extended), ExCode = 12
+ u32 PadEx12[15];
// ExCode 13 = Multicast bits 63:32
- u32 McastHigh; // Code = 0 (extended), ExCode = 13
- u32 PadEx13[15];
+ u32 McastHigh; // Code = 0 (extended), ExCode = 13
+ u32 PadEx13[15];
// ExCode 14 = Ping
- u32 Ping; // Code = 0 (extended), ExCode = 14
- u32 PadEx14[15];
+ u32 Ping; // Code = 0 (extended), ExCode = 14
+ u32 PadEx14[15];
// ExCode 15 = Link MTU
- u32 LinkMtu; // Code = 0 (extended), ExCode = 15
- u32 PadEx15[15];
+ u32 LinkMtu; // Code = 0 (extended), ExCode = 15
+ u32 PadEx15[15];
// ExCode 16 = Download synchronization
- u32 LoadSync; // Code = 0 (extended), ExCode = 16
- u32 PadEx16[15];
+ u32 LoadSync; // Code = 0 (extended), ExCode = 16
+ u32 PadEx16[15];
// ExCode 17 = Upper DRAM address bits on 32-bit systems
- u32 Upper; // Code = 0 (extended), ExCode = 17
- u32 PadEx17[15];
+ u32 Upper; // Code = 0 (extended), ExCode = 17
+ u32 PadEx17[15];
// ExCode 18 = Slowpath Send Index Address
- u32 SPSendIndex; // Code = 0 (extended), ExCode = 18
- u32 PadEx18[15];
- u32 RsvdXF; // Code = 0 (extended), ExCode = 19
- u32 PadEx19[15];
+ u32 SPSendIndex; // Code = 0 (extended), ExCode = 18
+ u32 PadEx18[15];
+ u32 RsvdXF; // Code = 0 (extended), ExCode = 19
+ u32 PadEx19[15];
// ExCode 20 = Aggregation
- u32 Aggregation; // Code = 0 (extended), ExCode = 20
- u32 PadEx20[15];
+ u32 Aggregation; // Code = 0 (extended), ExCode = 20
+ u32 PadEx20[15];
// ExCode 21 = Receive MDL push timer
- u32 PushTicks; // Code = 0 (extended), ExCode = 21
- u32 PadEx21[15];
+ u32 PushTicks; // Code = 0 (extended), ExCode = 21
+ u32 PadEx21[15];
// ExCode 22 = TOE NA
- u32 AckFrequency; // Code = 0 (extended), ExCode = 22
- u32 PadEx22[15];
+ u32 AckFrequency; // Code = 0 (extended), ExCode = 22
+ u32 PadEx22[15];
// ExCode 23 = TOE NA
- u32 RsvdReg23;
- u32 PadEx23[15];
+ u32 RsvdReg23;
+ u32 PadEx23[15];
// ExCode 24 = TOE NA
- u32 RsvdReg24;
- u32 PadEx24[15];
+ u32 RsvdReg24;
+ u32 PadEx24[15];
// ExCode 25 = TOE NA
- u32 RsvdReg25; // Code = 0 (extended), ExCode = 25
- u32 PadEx25[15];
+ u32 RsvdReg25; // Code = 0 (extended), ExCode = 25
+ u32 PadEx25[15];
// ExCode 26 = Receive checksum requirements
- u32 ReceiveChecksum; // Code = 0 (extended), ExCode = 26
- u32 PadEx26[15];
+ u32 ReceiveChecksum; // Code = 0 (extended), ExCode = 26
+ u32 PadEx26[15];
// ExCode 27 = RSS Requirements
- u32 Rss; // Code = 0 (extended), ExCode = 27
- u32 PadEx27[15];
+ u32 Rss; // Code = 0 (extended), ExCode = 27
+ u32 PadEx27[15];
// ExCode 28 = RSS Table
- u32 RssTable; // Code = 0 (extended), ExCode = 28
- u32 PadEx28[15];
+ u32 RssTable; // Code = 0 (extended), ExCode = 28
+ u32 PadEx28[15];
// ExCode 29 = Event ring release entries
- u32 EventRelease; // Code = 0 (extended), ExCode = 29
- u32 PadEx29[15];
+ u32 EventRelease; // Code = 0 (extended), ExCode = 29
+ u32 PadEx29[15];
// ExCode 30 = Number of receive bufferlist commands on ring 0
- u32 RcvCmd; // Code = 0 (extended), ExCode = 30
- u32 PadEx30[15];
+ u32 RcvCmd; // Code = 0 (extended), ExCode = 30
+ u32 PadEx30[15];
// ExCode 31 = slowpath transmit command - Data[31:0] = 1
- u32 XmtCmd; // Code = 0 (extended), ExCode = 31
- u32 PadEx31[15];
+ u32 XmtCmd; // Code = 0 (extended), ExCode = 31
+ u32 PadEx31[15];
// ExCode 32 = Dump command
- u32 DumpCmd; // Code = 0 (extended), ExCode = 32
- u32 PadEx32[15];
+ u32 DumpCmd; // Code = 0 (extended), ExCode = 32
+ u32 PadEx32[15];
// ExCode 33 = Debug command
- u32 DebugCmd; // Code = 0 (extended), ExCode = 33
- u32 PadEx33[15];
+ u32 DebugCmd; // Code = 0 (extended), ExCode = 33
+ u32 PadEx33[15];
// There are 128 possible extended commands - each of account for 16
// words (including the non-relevent base command codes 1-15).
// Pad for the remainder of these here to bring us to the next CPU
// base. As extended codes are added, reduce the first array value in
// the following field
- u32 PadToNextCpu[94][16]; // 94 = 128 - 34 (34 = Excodes 0 - 33)
+ u32 PadToNextCpu[94][16]; // 94 = 128 - 34 (34 = Excodes 0 - 33)
} SXG_UCODE_REGS, *PSXG_UCODE_REGS;

// Interrupt control register (0) values
@@ -141,7 +141,7 @@ typedef struct _SXG_UCODE_REGS {

// The Microcode supports up to 16 RSS queues
#define SXG_MAX_RSS 16
-#define SXG_MAX_RSS_TABLE_SIZE 256 // 256-byte max
+#define SXG_MAX_RSS_TABLE_SIZE 256 // 256-byte max

#define SXG_RSS_TCP6 0x00000001 // RSS TCP over IPv6
#define SXG_RSS_TCP4 0x00000002 // RSS TCP over IPv4
@@ -170,16 +170,16 @@ typedef struct _SXG_UCODE_REGS {
* SXG_UCODE_REGS definition above
*/
typedef struct _SXG_TCB_REGS {
- u32 ExCode; /* Extended codes - see SXG_UCODE_REGS */
- u32 Xmt; /* Code = 1 - # of Xmt descriptors added to ring */
- u32 Rcv; /* Code = 2 - # of Rcv descriptors added to ring */
- u32 Rsvd1; /* Code = 3 - TOE NA */
- u32 Rsvd2; /* Code = 4 - TOE NA */
- u32 Rsvd3; /* Code = 5 - TOE NA */
- u32 Invalid; /* Code = 6 - Reserved for "CardUp" see above */
- u32 Rsvd4; /* Code = 7 - TOE NA */
- u32 Rsvd5; /* Code = 8 - TOE NA */
- u32 Pad[7]; /* Codes 8-15 - Not used. */
+ u32 ExCode; /* Extended codes - see SXG_UCODE_REGS */
+ u32 Xmt; /* Code = 1 - # of Xmt descriptors added to ring */
+ u32 Rcv; /* Code = 2 - # of Rcv descriptors added to ring */
+ u32 Rsvd1; /* Code = 3 - TOE NA */
+ u32 Rsvd2; /* Code = 4 - TOE NA */
+ u32 Rsvd3; /* Code = 5 - TOE NA */
+ u32 Invalid; /* Code = 6 - Reserved for "CardUp" see above */
+ u32 Rsvd4; /* Code = 7 - TOE NA */
+ u32 Rsvd5; /* Code = 8 - TOE NA */
+ u32 Pad[7]; /* Codes 8-15 - Not used. */
} SXG_TCB_REGS, *PSXG_TCB_REGS;

/***************************************************************************
@@ -273,27 +273,27 @@ typedef struct _SXG_TCB_REGS {
*/
#pragma pack(push, 1)
typedef struct _SXG_EVENT {
- u32 Pad[1]; // not used
- u32 SndUna; // SndUna value
- u32 Resid; // receive MDL resid
+ u32 Pad[1]; // not used
+ u32 SndUna; // SndUna value
+ u32 Resid; // receive MDL resid
union {
- void * HostHandle; // Receive host handle
- u32 Rsvd1; // TOE NA
+ void *HostHandle; // Receive host handle
+ u32 Rsvd1; // TOE NA
struct {
- u32 NotUsed;
- u32 Rsvd2; // TOE NA
+ u32 NotUsed;
+ u32 Rsvd2; // TOE NA
} Flush;
};
- u32 Toeplitz; // RSS Toeplitz hash
+ u32 Toeplitz; // RSS Toeplitz hash
union {
- ushort Rsvd3; // TOE NA
- ushort HdrOffset; // Slowpath
+ ushort Rsvd3; // TOE NA
+ ushort HdrOffset; // Slowpath
};
- ushort Length; //
- unsigned char Rsvd4; // TOE NA
- unsigned char Code; // Event code
- unsigned char CommandIndex; // New ring index
- unsigned char Status; // Event status
+ ushort Length; //
+ unsigned char Rsvd4; // TOE NA
+ unsigned char Code; // Event code
+ unsigned char CommandIndex; // New ring index
+ unsigned char Status; // Event status
} SXG_EVENT, *PSXG_EVENT;
#pragma pack(pop)

@@ -318,12 +318,12 @@ typedef struct _SXG_EVENT {
// Event ring
// Size must be power of 2, between 128 and 16k
#define EVENT_RING_SIZE 4096 // ??
-#define EVENT_RING_BATCH 16 // Hand entries back 16 at a time.
-#define EVENT_BATCH_LIMIT 256 // Stop processing events after 256 (16 * 16)
+#define EVENT_RING_BATCH 16 // Hand entries back 16 at a time.
+#define EVENT_BATCH_LIMIT 256 // Stop processing events after 256 (16 * 16)

typedef struct _SXG_EVENT_RING {
- SXG_EVENT Ring[EVENT_RING_SIZE];
-}SXG_EVENT_RING, *PSXG_EVENT_RING;
+ SXG_EVENT Ring[EVENT_RING_SIZE];
+} SXG_EVENT_RING, *PSXG_EVENT_RING;

/***************************************************************************
*
@@ -341,7 +341,7 @@ typedef struct _SXG_EVENT_RING {
#define SXG_TCB_PER_BUCKET 16
#define SXG_TCB_BUCKET_MASK 0xFF0 // Bucket portion of TCB ID
#define SXG_TCB_ELEMENT_MASK 0x00F // Element within bucket
-#define SXG_TCB_BUCKETS 256 // 256 * 16 = 4k
+#define SXG_TCB_BUCKETS 256 // 256 * 16 = 4k

#define SXG_TCB_BUFFER_SIZE 512 // ASSERT format is correct

@@ -368,7 +368,6 @@ typedef struct _SXG_EVENT_RING {
&(_TcpObject)->CompBuffer->Frame.HasVlan.TcpIp6.Ip : \
&(_TcpObject)->CompBuffer->Frame.NoVlan.TcpIp6.Ip

-
#if DBG
// Horrible kludge to distinguish dumb-nic, slowpath, and
// fastpath traffic. Decrement the HopLimit by one
@@ -396,16 +395,16 @@ typedef struct _SXG_EVENT_RING {
* Receive and transmit rings
***************************************************************************/
#define SXG_MAX_RING_SIZE 256
-#define SXG_XMT_RING_SIZE 128 // Start with 128
-#define SXG_RCV_RING_SIZE 128 // Start with 128
+#define SXG_XMT_RING_SIZE 128 // Start with 128
+#define SXG_RCV_RING_SIZE 128 // Start with 128
#define SXG_MAX_ENTRIES 4096

// Structure and macros to manage a ring
typedef struct _SXG_RING_INFO {
- unsigned char Head; // Where we add entries - Note unsigned char:RING_SIZE
- unsigned char Tail; // Where we pull off completed entries
- ushort Size; // Ring size - Must be multiple of 2
- void * Context[SXG_MAX_RING_SIZE]; // Shadow ring
+ unsigned char Head; // Where we add entries - Note unsigned char:RING_SIZE
+ unsigned char Tail; // Where we pull off completed entries
+ ushort Size; // Ring size - Must be multiple of 2
+ void *Context[SXG_MAX_RING_SIZE]; // Shadow ring
} SXG_RING_INFO, *PSXG_RING_INFO;

#define SXG_INITIALIZE_RING(_ring, _size) { \
@@ -483,40 +482,40 @@ typedef struct _SXG_RING_INFO {
*/
#pragma pack(push, 1)
typedef struct _SXG_CMD {
- dma_addr_t Sgl; // Physical address of SGL
+ dma_addr_t Sgl; // Physical address of SGL
union {
struct {
- dma64_addr_t FirstSgeAddress;// Address of first SGE
- u32 FirstSgeLength; // Length of first SGE
+ dma64_addr_t FirstSgeAddress; // Address of first SGE
+ u32 FirstSgeLength; // Length of first SGE
union {
- u32 Rsvd1; // TOE NA
- u32 SgeOffset; // Slowpath - 2nd SGE offset
- u32 Resid; // MDL completion - clobbers update
+ u32 Rsvd1; // TOE NA
+ u32 SgeOffset; // Slowpath - 2nd SGE offset
+ u32 Resid; // MDL completion - clobbers update
};
union {
- u32 TotalLength; // Total transfer length
- u32 Mss; // LSO MSS
+ u32 TotalLength; // Total transfer length
+ u32 Mss; // LSO MSS
};
} Buffer;
};
union {
struct {
- unsigned char Flags:4; // slowpath flags
- unsigned char IpHl:4; // Ip header length (>>2)
- unsigned char MacLen; // Mac header len
+ unsigned char Flags:4; // slowpath flags
+ unsigned char IpHl:4; // Ip header length (>>2)
+ unsigned char MacLen; // Mac header len
} CsumFlags;
struct {
- ushort Flags:4; // slowpath flags
- ushort TcpHdrOff:7; // TCP
- ushort MacLen:5; // Mac header len
+ ushort Flags:4; // slowpath flags
+ ushort TcpHdrOff:7; // TCP
+ ushort MacLen:5; // Mac header len
} LsoFlags;
- ushort Flags; // flags
+ ushort Flags; // flags
};
union {
- ushort SgEntries; // SG entry count including first sge
+ ushort SgEntries; // SG entry count including first sge
struct {
- unsigned char Status; // Copied from event status
- unsigned char NotUsed;
+ unsigned char Status; // Copied from event status
+ unsigned char NotUsed;
} Status;
};
} SXG_CMD, *PSXG_CMD;
@@ -524,8 +523,8 @@ typedef struct _SXG_CMD {

#pragma pack(push, 1)
typedef struct _VLAN_HDR {
- ushort VlanTci;
- ushort VlanTpid;
+ ushort VlanTci;
+ ushort VlanTpid;
} VLAN_HDR, *PVLAN_HDR;
#pragma pack(pop)

@@ -561,16 +560,16 @@ typedef struct _VLAN_HDR {
*
*/
// Slowpath CMD flags
-#define SXG_SLOWCMD_CSUM_IP 0x01 // Checksum IP
-#define SXG_SLOWCMD_CSUM_TCP 0x02 // Checksum TCP
-#define SXG_SLOWCMD_LSO 0x04 // Large segment send
+#define SXG_SLOWCMD_CSUM_IP 0x01 // Checksum IP
+#define SXG_SLOWCMD_CSUM_TCP 0x02 // Checksum TCP
+#define SXG_SLOWCMD_LSO 0x04 // Large segment send

typedef struct _SXG_XMT_RING {
- SXG_CMD Descriptors[SXG_XMT_RING_SIZE];
+ SXG_CMD Descriptors[SXG_XMT_RING_SIZE];
} SXG_XMT_RING, *PSXG_XMT_RING;

typedef struct _SXG_RCV_RING {
- SXG_CMD Descriptors[SXG_RCV_RING_SIZE];
+ SXG_CMD Descriptors[SXG_RCV_RING_SIZE];
} SXG_RCV_RING, *PSXG_RCV_RING;

/***************************************************************************
@@ -578,8 +577,8 @@ typedef struct _SXG_RCV_RING {
* shared memory allocation
***************************************************************************/
typedef enum {
- SXG_BUFFER_TYPE_RCV, // Receive buffer
- SXG_BUFFER_TYPE_SGL // SGL buffer
+ SXG_BUFFER_TYPE_RCV, // Receive buffer
+ SXG_BUFFER_TYPE_SGL // SGL buffer
} SXG_BUFFER_TYPE;

// State for SXG buffers
@@ -668,60 +667,60 @@ typedef enum {
#define SXG_RCV_DATA_BUFFERS 4096 // Amount to give to the card
#define SXG_INITIAL_RCV_DATA_BUFFERS 8192 // Initial pool of buffers
#define SXG_MIN_RCV_DATA_BUFFERS 2048 // Minimum amount and when to get more
-#define SXG_MAX_RCV_BLOCKS 128 // = 16384 receive buffers
+#define SXG_MAX_RCV_BLOCKS 128 // = 16384 receive buffers

// Receive buffer header
typedef struct _SXG_RCV_DATA_BUFFER_HDR {
- dma_addr_t PhysicalAddress; // Buffer physical address
+ dma_addr_t PhysicalAddress; // Buffer physical address
// Note - DO NOT USE the VirtualAddress field to locate data.
// Use the sxg.h:SXG_RECEIVE_DATA_LOCATION macro instead.
- void *VirtualAddress; // Start of buffer
- LIST_ENTRY FreeList; // Free queue of buffers
- struct _SXG_RCV_DATA_BUFFER_HDR *Next; // Fastpath data buffer queue
- u32 Size; // Buffer size
- u32 ByteOffset; // See SXG_RESTORE_MDL_OFFSET
- unsigned char State; // See SXG_BUFFER state above
- unsigned char Status; // Event status (to log PUSH)
- struct sk_buff * skb; // Double mapped (nbl and pkt)
+ void *VirtualAddress; // Start of buffer
+ LIST_ENTRY FreeList; // Free queue of buffers
+ struct _SXG_RCV_DATA_BUFFER_HDR *Next; // Fastpath data buffer queue
+ u32 Size; // Buffer size
+ u32 ByteOffset; // See SXG_RESTORE_MDL_OFFSET
+ unsigned char State; // See SXG_BUFFER state above
+ unsigned char Status; // Event status (to log PUSH)
+ struct sk_buff *skb; // Double mapped (nbl and pkt)
} SXG_RCV_DATA_BUFFER_HDR, *PSXG_RCV_DATA_BUFFER_HDR;

// SxgSlowReceive uses the PACKET (skb) contained
// in the SXG_RCV_DATA_BUFFER_HDR when indicating dumb-nic data
#define SxgDumbRcvPacket skb

-#define SXG_RCV_DATA_HDR_SIZE 256 // Space for SXG_RCV_DATA_BUFFER_HDR
+#define SXG_RCV_DATA_HDR_SIZE 256 // Space for SXG_RCV_DATA_BUFFER_HDR
#define SXG_RCV_DATA_BUFFER_SIZE 2048 // Non jumbo = 2k including HDR
#define SXG_RCV_JUMBO_BUFFER_SIZE 10240 // jumbo = 10k including HDR

// Receive data descriptor
typedef struct _SXG_RCV_DATA_DESCRIPTOR {
union {
- struct sk_buff * VirtualAddress; // Host handle
- u64 ForceTo8Bytes; // Force x86 to 8-byte boundary
+ struct sk_buff *VirtualAddress; // Host handle
+ u64 ForceTo8Bytes; // Force x86 to 8-byte boundary
};
- dma_addr_t PhysicalAddress;
+ dma_addr_t PhysicalAddress;
} SXG_RCV_DATA_DESCRIPTOR, *PSXG_RCV_DATA_DESCRIPTOR;

// Receive descriptor block
#define SXG_RCV_DESCRIPTORS_PER_BLOCK 128
#define SXG_RCV_DESCRIPTOR_BLOCK_SIZE 2048 // For sanity check
typedef struct _SXG_RCV_DESCRIPTOR_BLOCK {
- SXG_RCV_DATA_DESCRIPTOR Descriptors[SXG_RCV_DESCRIPTORS_PER_BLOCK];
+ SXG_RCV_DATA_DESCRIPTOR Descriptors[SXG_RCV_DESCRIPTORS_PER_BLOCK];
} SXG_RCV_DESCRIPTOR_BLOCK, *PSXG_RCV_DESCRIPTOR_BLOCK;

// Receive descriptor block header
typedef struct _SXG_RCV_DESCRIPTOR_BLOCK_HDR {
- void * VirtualAddress; // Start of 2k buffer
- dma_addr_t PhysicalAddress; // ..and it's physical address
- LIST_ENTRY FreeList; // Free queue of descriptor blocks
- unsigned char State; // See SXG_BUFFER state above
+ void *VirtualAddress; // Start of 2k buffer
+ dma_addr_t PhysicalAddress; // ..and it's physical address
+ LIST_ENTRY FreeList; // Free queue of descriptor blocks
+ unsigned char State; // See SXG_BUFFER state above
} SXG_RCV_DESCRIPTOR_BLOCK_HDR, *PSXG_RCV_DESCRIPTOR_BLOCK_HDR;

// Receive block header
typedef struct _SXG_RCV_BLOCK_HDR {
- void * VirtualAddress; // Start of virtual memory
- dma_addr_t PhysicalAddress; // ..and it's physical address
- LIST_ENTRY AllList; // Queue of all SXG_RCV_BLOCKS
+ void *VirtualAddress; // Start of virtual memory
+ dma_addr_t PhysicalAddress; // ..and it's physical address
+ LIST_ENTRY AllList; // Queue of all SXG_RCV_BLOCKS
} SXG_RCV_BLOCK_HDR, *PSXG_RCV_BLOCK_HDR;

// Macros to determine data structure offsets into receive block
@@ -747,8 +746,8 @@ typedef struct _SXG_RCV_BLOCK_HDR {
// Use the miniport reserved portion of the NBL to locate
// our SXG_RCV_DATA_BUFFER_HDR structure.
typedef struct _SXG_RCV_NBL_RESERVED {
- PSXG_RCV_DATA_BUFFER_HDR RcvDataBufferHdr;
- void * Available;
+ PSXG_RCV_DATA_BUFFER_HDR RcvDataBufferHdr;
+ void *Available;
} SXG_RCV_NBL_RESERVED, *PSXG_RCV_NBL_RESERVED;

#define SXG_RCV_NBL_BUFFER_HDR(_NBL) (((PSXG_RCV_NBL_RESERVED)NET_BUFFER_LIST_MINIPORT_RESERVED(_NBL))->RcvDataBufferHdr)
@@ -760,12 +759,11 @@ typedef struct _SXG_RCV_NBL_RESERVED {
#define SXG_MIN_SGL_BUFFERS 2048 // Minimum amount and when to get more
#define SXG_MAX_SGL_BUFFERS 16384 // Maximum to allocate (note ADAPT:ushort)

-
// Self identifying structure type
typedef enum _SXG_SGL_TYPE {
- SXG_SGL_DUMB, // Dumb NIC SGL
- SXG_SGL_SLOW, // Slowpath protocol header - see below
- SXG_SGL_CHIMNEY // Chimney offload SGL
+ SXG_SGL_DUMB, // Dumb NIC SGL
+ SXG_SGL_SLOW, // Slowpath protocol header - see below
+ SXG_SGL_CHIMNEY // Chimney offload SGL
} SXG_SGL_TYPE, PSXG_SGL_TYPE;

// Note - the description below is Microsoft specific
@@ -774,14 +772,14 @@ typedef enum _SXG_SGL_TYPE {
// for the SCATTER_GATHER_LIST portion of the SXG_SCATTER_GATHER data structure.
// The following considerations apply when setting this value:
// - First, the Sahara card is designed to read the Microsoft SGL structure
-// straight out of host memory. This means that the SGL must reside in
-// shared memory. If the length here is smaller than the SGL for the
-// NET_BUFFER, then NDIS will allocate its own buffer. The buffer
-// that NDIS allocates is not in shared memory, so when this happens,
-// the SGL will need to be copied to a set of SXG_SCATTER_GATHER buffers.
-// In other words.. we don't want this value to be too small.
+// straight out of host memory. This means that the SGL must reside in
+// shared memory. If the length here is smaller than the SGL for the
+// NET_BUFFER, then NDIS will allocate its own buffer. The buffer
+// that NDIS allocates is not in shared memory, so when this happens,
+// the SGL will need to be copied to a set of SXG_SCATTER_GATHER buffers.
+// In other words.. we don't want this value to be too small.
// - On the other hand.. we're allocating up to 16k of these things. If
-// we make this too big, we start to consume a ton of memory..
+// we make this too big, we start to consume a ton of memory..
// At the moment, I'm going to limit the number of SG entries to 150.
// If each entry maps roughly 4k, then this should cover roughly 600kB
// NET_BUFFERs. Furthermore, since each entry is 24 bytes, the total
@@ -801,24 +799,23 @@ typedef enum _SXG_SGL_TYPE {
// the SGL. The following structure defines an x64
// formatted SGL entry
typedef struct _SXG_X64_SGE {
- dma64_addr_t Address; // same as wdm.h
- u32 Length; // same as wdm.h
- u32 CompilerPad;// The compiler pads to 8-bytes
- u64 Reserved; // u32 * in wdm.h. Force to 8 bytes
+ dma64_addr_t Address; // same as wdm.h
+ u32 Length; // same as wdm.h
+ u32 CompilerPad; // The compiler pads to 8-bytes
+ u64 Reserved; // u32 * in wdm.h. Force to 8 bytes
} SXG_X64_SGE, *PSXG_X64_SGE;

typedef struct _SCATTER_GATHER_ELEMENT {
- dma64_addr_t Address; // same as wdm.h
- u32 Length; // same as wdm.h
- u32 CompilerPad;// The compiler pads to 8-bytes
- u64 Reserved; // u32 * in wdm.h. Force to 8 bytes
+ dma64_addr_t Address; // same as wdm.h
+ u32 Length; // same as wdm.h
+ u32 CompilerPad; // The compiler pads to 8-bytes
+ u64 Reserved; // u32 * in wdm.h. Force to 8 bytes
} SCATTER_GATHER_ELEMENT, *PSCATTER_GATHER_ELEMENT;

-
typedef struct _SCATTER_GATHER_LIST {
- u32 NumberOfElements;
- u32 * Reserved;
- SCATTER_GATHER_ELEMENT Elements[];
+ u32 NumberOfElements;
+ u32 *Reserved;
+ SCATTER_GATHER_ELEMENT Elements[];
} SCATTER_GATHER_LIST, *PSCATTER_GATHER_LIST;

// The card doesn't care about anything except elements, so
@@ -826,26 +823,26 @@ typedef struct _SCATTER_GATHER_LIST {
// SGL structure. But redefine from wdm.h:SCATTER_GATHER_LIST so
// we can specify SXG_X64_SGE and define a fixed number of elements
typedef struct _SXG_X64_SGL {
- u32 NumberOfElements;
- u32 * Reserved;
- SXG_X64_SGE Elements[SXG_SGL_ENTRIES];
+ u32 NumberOfElements;
+ u32 *Reserved;
+ SXG_X64_SGE Elements[SXG_SGL_ENTRIES];
} SXG_X64_SGL, *PSXG_X64_SGL;

typedef struct _SXG_SCATTER_GATHER {
- SXG_SGL_TYPE Type; // FIRST! Dumb-nic or offload
- void * adapter; // Back pointer to adapter
- LIST_ENTRY FreeList; // Free SXG_SCATTER_GATHER blocks
- LIST_ENTRY AllList; // All SXG_SCATTER_GATHER blocks
- dma_addr_t PhysicalAddress;// physical address
- unsigned char State; // See SXG_BUFFER state above
- unsigned char CmdIndex; // Command ring index
- struct sk_buff * DumbPacket; // Associated Packet
- u32 Direction; // For asynchronous completions
- u32 CurOffset; // Current SGL offset
- u32 SglRef; // SGL reference count
- VLAN_HDR VlanTag; // VLAN tag to be inserted into SGL
- PSCATTER_GATHER_LIST pSgl; // SGL Addr. Possibly &Sgl
- SXG_X64_SGL Sgl; // SGL handed to card
+ SXG_SGL_TYPE Type; // FIRST! Dumb-nic or offload
+ void *adapter; // Back pointer to adapter
+ LIST_ENTRY FreeList; // Free SXG_SCATTER_GATHER blocks
+ LIST_ENTRY AllList; // All SXG_SCATTER_GATHER blocks
+ dma_addr_t PhysicalAddress; // physical address
+ unsigned char State; // See SXG_BUFFER state above
+ unsigned char CmdIndex; // Command ring index
+ struct sk_buff *DumbPacket; // Associated Packet
+ u32 Direction; // For asynchronous completions
+ u32 CurOffset; // Current SGL offset
+ u32 SglRef; // SGL reference count
+ VLAN_HDR VlanTag; // VLAN tag to be inserted into SGL
+ PSCATTER_GATHER_LIST pSgl; // SGL Addr. Possibly &Sgl
+ SXG_X64_SGL Sgl; // SGL handed to card
} SXG_SCATTER_GATHER, *PSXG_SCATTER_GATHER;

#if defined(CONFIG_X86_64)
@@ -856,6 +853,5 @@ typedef struct _SXG_SCATTER_GATHER {
#define SXG_SGL_BUFFER(_SxgSgl) NULL
#define SXG_SGL_BUF_SIZE 0
#else
- Stop Compilation;
+Stop Compilation;
#endif
-
diff --git a/drivers/staging/sxg/sxghw.h b/drivers/staging/sxg/sxghw.h
index 8f4f6ef..870eef3 100644
--- a/drivers/staging/sxg/sxghw.h
+++ b/drivers/staging/sxg/sxghw.h
@@ -141,7 +141,7 @@ typedef struct _SXG_HW_REGS {
#define SXG_REGISTER_SIZE_PER_CPU 0x00002000 // Used to sanity check UCODE_REGS structure

// Sahara receive sequencer status values
-#define SXG_RCV_STATUS_ATTN 0x80000000 // Attention
+#define SXG_RCV_STATUS_ATTN 0x80000000 // Attention
#define SXG_RCV_STATUS_TRANSPORT_MASK 0x3F000000 // Transport mask
#define SXG_RCV_STATUS_TRANSPORT_ERROR 0x20000000 // Transport error
#define SXG_RCV_STATUS_TRANSPORT_CSUM 0x23000000 // Transport cksum error
@@ -156,9 +156,9 @@ typedef struct _SXG_HW_REGS {
#define SXG_RCV_STATUS_TRANSPORT_FTP 0x03000000 // Transport FTP
#define SXG_RCV_STATUS_TRANSPORT_HTTP 0x02000000 // Transport HTTP
#define SXG_RCV_STATUS_TRANSPORT_SMB 0x01000000 // Transport SMB
-#define SXG_RCV_STATUS_NETWORK_MASK 0x00FF0000 // Network mask
+#define SXG_RCV_STATUS_NETWORK_MASK 0x00FF0000 // Network mask
#define SXG_RCV_STATUS_NETWORK_ERROR 0x00800000 // Network error
-#define SXG_RCV_STATUS_NETWORK_CSUM 0x00830000 // Network cksum error
+#define SXG_RCV_STATUS_NETWORK_CSUM 0x00830000 // Network cksum error
#define SXG_RCV_STATUS_NETWORK_UFLOW 0x00820000 // Network underflow error
#define SXG_RCV_STATUS_NETWORK_HDRLEN 0x00800000 // Network header length
#define SXG_RCV_STATUS_NETWORK_OFLOW 0x00400000 // Network overflow detected
@@ -167,67 +167,67 @@ typedef struct _SXG_HW_REGS {
#define SXG_RCV_STATUS_NETWORK_OFFSET 0x00080000 // Network offset detected
#define SXG_RCV_STATUS_NETWORK_FRAGMENT 0x00040000 // Network fragment detected
#define SXG_RCV_STATUS_NETWORK_TRANS_MASK 0x00030000 // Network transport type mask
-#define SXG_RCV_STATUS_NETWORK_UDP 0x00020000 // UDP
-#define SXG_RCV_STATUS_NETWORK_TCP 0x00010000 // TCP
-#define SXG_RCV_STATUS_IPONLY 0x00008000 // IP-only not TCP
-#define SXG_RCV_STATUS_PKT_PRI 0x00006000 // Receive priority
-#define SXG_RCV_STATUS_PKT_PRI_SHFT 13 // Receive priority shift
-#define SXG_RCV_STATUS_PARITY 0x00001000 // MAC Receive RAM parity error
-#define SXG_RCV_STATUS_ADDRESS_MASK 0x00000F00 // Link address detection mask
-#define SXG_RCV_STATUS_ADDRESS_D 0x00000B00 // Link address D
-#define SXG_RCV_STATUS_ADDRESS_C 0x00000A00 // Link address C
-#define SXG_RCV_STATUS_ADDRESS_B 0x00000900 // Link address B
-#define SXG_RCV_STATUS_ADDRESS_A 0x00000800 // Link address A
+#define SXG_RCV_STATUS_NETWORK_UDP 0x00020000 // UDP
+#define SXG_RCV_STATUS_NETWORK_TCP 0x00010000 // TCP
+#define SXG_RCV_STATUS_IPONLY 0x00008000 // IP-only not TCP
+#define SXG_RCV_STATUS_PKT_PRI 0x00006000 // Receive priority
+#define SXG_RCV_STATUS_PKT_PRI_SHFT 13 // Receive priority shift
+#define SXG_RCV_STATUS_PARITY 0x00001000 // MAC Receive RAM parity error
+#define SXG_RCV_STATUS_ADDRESS_MASK 0x00000F00 // Link address detection mask
+#define SXG_RCV_STATUS_ADDRESS_D 0x00000B00 // Link address D
+#define SXG_RCV_STATUS_ADDRESS_C 0x00000A00 // Link address C
+#define SXG_RCV_STATUS_ADDRESS_B 0x00000900 // Link address B
+#define SXG_RCV_STATUS_ADDRESS_A 0x00000800 // Link address A
#define SXG_RCV_STATUS_ADDRESS_BCAST 0x00000300 // Link address broadcast
#define SXG_RCV_STATUS_ADDRESS_MCAST 0x00000200 // Link address multicast
#define SXG_RCV_STATUS_ADDRESS_CMCAST 0x00000100 // Link control multicast
-#define SXG_RCV_STATUS_LINK_MASK 0x000000FF // Link status mask
-#define SXG_RCV_STATUS_LINK_ERROR 0x00000080 // Link error
-#define SXG_RCV_STATUS_LINK_MASK 0x000000FF // Link status mask
-#define SXG_RCV_STATUS_LINK_PARITY 0x00000087 // RcvMacQ parity error
-#define SXG_RCV_STATUS_LINK_EARLY 0x00000086 // Data early
+#define SXG_RCV_STATUS_LINK_MASK 0x000000FF // Link status mask
+#define SXG_RCV_STATUS_LINK_ERROR 0x00000080 // Link error
+#define SXG_RCV_STATUS_LINK_MASK 0x000000FF // Link status mask
+#define SXG_RCV_STATUS_LINK_PARITY 0x00000087 // RcvMacQ parity error
+#define SXG_RCV_STATUS_LINK_EARLY 0x00000086 // Data early
#define SXG_RCV_STATUS_LINK_BUFOFLOW 0x00000085 // Buffer overflow
-#define SXG_RCV_STATUS_LINK_CODE 0x00000084 // Link code error
-#define SXG_RCV_STATUS_LINK_DRIBBLE 0x00000083 // Dribble nibble
-#define SXG_RCV_STATUS_LINK_CRC 0x00000082 // CRC error
-#define SXG_RCV_STATUS_LINK_OFLOW 0x00000081 // Link overflow
-#define SXG_RCV_STATUS_LINK_UFLOW 0x00000080 // Link underflow
-#define SXG_RCV_STATUS_LINK_8023 0x00000020 // 802.3
-#define SXG_RCV_STATUS_LINK_SNAP 0x00000010 // Snap
-#define SXG_RCV_STATUS_LINK_VLAN 0x00000008 // VLAN
+#define SXG_RCV_STATUS_LINK_CODE 0x00000084 // Link code error
+#define SXG_RCV_STATUS_LINK_DRIBBLE 0x00000083 // Dribble nibble
+#define SXG_RCV_STATUS_LINK_CRC 0x00000082 // CRC error
+#define SXG_RCV_STATUS_LINK_OFLOW 0x00000081 // Link overflow
+#define SXG_RCV_STATUS_LINK_UFLOW 0x00000080 // Link underflow
+#define SXG_RCV_STATUS_LINK_8023 0x00000020 // 802.3
+#define SXG_RCV_STATUS_LINK_SNAP 0x00000010 // Snap
+#define SXG_RCV_STATUS_LINK_VLAN 0x00000008 // VLAN
#define SXG_RCV_STATUS_LINK_TYPE_MASK 0x00000007 // Network type mask
-#define SXG_RCV_STATUS_LINK_CONTROL 0x00000003 // Control packet
-#define SXG_RCV_STATUS_LINK_IPV6 0x00000002 // IPv6 packet
-#define SXG_RCV_STATUS_LINK_IPV4 0x00000001 // IPv4 packet
+#define SXG_RCV_STATUS_LINK_CONTROL 0x00000003 // Control packet
+#define SXG_RCV_STATUS_LINK_IPV6 0x00000002 // IPv6 packet
+#define SXG_RCV_STATUS_LINK_IPV4 0x00000001 // IPv4 packet

/***************************************************************************
* Sahara receive and transmit configuration registers
***************************************************************************/
-#define RCV_CONFIG_RESET 0x80000000 // RcvConfig register reset
-#define RCV_CONFIG_ENABLE 0x40000000 // Enable the receive logic
-#define RCV_CONFIG_ENPARSE 0x20000000 // Enable the receive parser
-#define RCV_CONFIG_SOCKET 0x10000000 // Enable the socket detector
-#define RCV_CONFIG_RCVBAD 0x08000000 // Receive all bad frames
-#define RCV_CONFIG_CONTROL 0x04000000 // Receive all control frames
-#define RCV_CONFIG_RCVPAUSE 0x02000000 // Enable pause transmit when attn
-#define RCV_CONFIG_TZIPV6 0x01000000 // Include TCP port w/ IPv6 toeplitz
-#define RCV_CONFIG_TZIPV4 0x00800000 // Include TCP port w/ IPv4 toeplitz
-#define RCV_CONFIG_FLUSH 0x00400000 // Flush buffers
+#define RCV_CONFIG_RESET 0x80000000 // RcvConfig register reset
+#define RCV_CONFIG_ENABLE 0x40000000 // Enable the receive logic
+#define RCV_CONFIG_ENPARSE 0x20000000 // Enable the receive parser
+#define RCV_CONFIG_SOCKET 0x10000000 // Enable the socket detector
+#define RCV_CONFIG_RCVBAD 0x08000000 // Receive all bad frames
+#define RCV_CONFIG_CONTROL 0x04000000 // Receive all control frames
+#define RCV_CONFIG_RCVPAUSE 0x02000000 // Enable pause transmit when attn
+#define RCV_CONFIG_TZIPV6 0x01000000 // Include TCP port w/ IPv6 toeplitz
+#define RCV_CONFIG_TZIPV4 0x00800000 // Include TCP port w/ IPv4 toeplitz
+#define RCV_CONFIG_FLUSH 0x00400000 // Flush buffers
#define RCV_CONFIG_PRIORITY_MASK 0x00300000 // Priority level
#define RCV_CONFIG_HASH_MASK 0x00030000 // Hash depth
-#define RCV_CONFIG_HASH_8 0x00000000 // Hash depth 8
-#define RCV_CONFIG_HASH_16 0x00010000 // Hash depth 16
-#define RCV_CONFIG_HASH_4 0x00020000 // Hash depth 4
-#define RCV_CONFIG_HASH_2 0x00030000 // Hash depth 2
+#define RCV_CONFIG_HASH_8 0x00000000 // Hash depth 8
+#define RCV_CONFIG_HASH_16 0x00010000 // Hash depth 16
+#define RCV_CONFIG_HASH_4 0x00020000 // Hash depth 4
+#define RCV_CONFIG_HASH_2 0x00030000 // Hash depth 2
#define RCV_CONFIG_BUFLEN_MASK 0x0000FFF0 // Buffer length bits 15:4. ie multiple of 16.
-#define RCV_CONFIG_SKT_DIS 0x00000008 // Disable socket detection on attn
+#define RCV_CONFIG_SKT_DIS 0x00000008 // Disable socket detection on attn
// Macro to determine RCV_CONFIG_BUFLEN based on maximum frame size.
// We add 18 bytes for Sahara receive status and padding, plus 4 bytes for CRC,
// and round up to nearest 16 byte boundary
#define RCV_CONFIG_BUFSIZE(_MaxFrame) ((((_MaxFrame) + 22) + 15) & RCV_CONFIG_BUFLEN_MASK)

-#define XMT_CONFIG_RESET 0x80000000 // XmtConfig register reset
-#define XMT_CONFIG_ENABLE 0x40000000 // Enable transmit logic
+#define XMT_CONFIG_RESET 0x80000000 // XmtConfig register reset
+#define XMT_CONFIG_ENABLE 0x40000000 // Enable transmit logic
#define XMT_CONFIG_MAC_PARITY 0x20000000 // Inhibit MAC RAM parity error
#define XMT_CONFIG_BUF_PARITY 0x10000000 // Inhibit D2F buffer parity error
#define XMT_CONFIG_MEM_PARITY 0x08000000 // Inhibit 1T SRAM parity error
@@ -249,9 +249,9 @@ typedef struct _SXG_HW_REGS {

// A-XGMAC Configuration Register 1
#define AXGMAC_CFG1_XMT_PAUSE 0x80000000 // Allow the sending of Pause frames
-#define AXGMAC_CFG1_XMT_EN 0x40000000 // Enable transmit
+#define AXGMAC_CFG1_XMT_EN 0x40000000 // Enable transmit
#define AXGMAC_CFG1_RCV_PAUSE 0x20000000 // Allow the detection of Pause frames
-#define AXGMAC_CFG1_RCV_EN 0x10000000 // Enable receive
+#define AXGMAC_CFG1_RCV_EN 0x10000000 // Enable receive
#define AXGMAC_CFG1_XMT_STATE 0x04000000 // Current transmit state - READ ONLY
#define AXGMAC_CFG1_RCV_STATE 0x01000000 // Current receive state - READ ONLY
#define AXGMAC_CFG1_XOFF_SHORT 0x00001000 // Only pause for 64 slot on XOFF
@@ -262,24 +262,24 @@ typedef struct _SXG_HW_REGS {
#define AXGMAC_CFG1_RCV_FCS2 0x00000200 // Delay receive FCS 2 4-byte words
#define AXGMAC_CFG1_RCV_FCS3 0x00000300 // Delay receive FCS 3 4-byte words
#define AXGMAC_CFG1_PKT_OVERRIDE 0x00000080 // Per-packet override enable
-#define AXGMAC_CFG1_SWAP 0x00000040 // Byte swap enable
+#define AXGMAC_CFG1_SWAP 0x00000040 // Byte swap enable
#define AXGMAC_CFG1_SHORT_ASSERT 0x00000020 // ASSERT srdrpfrm on short frame (<64)
#define AXGMAC_CFG1_RCV_STRICT 0x00000010 // RCV only 802.3AE when CLEAR
#define AXGMAC_CFG1_CHECK_LEN 0x00000008 // Verify frame length
-#define AXGMAC_CFG1_GEN_FCS 0x00000004 // Generate FCS
+#define AXGMAC_CFG1_GEN_FCS 0x00000004 // Generate FCS
#define AXGMAC_CFG1_PAD_MASK 0x00000003 // Mask for pad bits
-#define AXGMAC_CFG1_PAD_64 0x00000001 // Pad frames to 64 bytes
+#define AXGMAC_CFG1_PAD_64 0x00000001 // Pad frames to 64 bytes
#define AXGMAC_CFG1_PAD_VLAN 0x00000002 // Detect VLAN and pad to 68 bytes
-#define AXGMAC_CFG1_PAD_68 0x00000003 // Pad to 68 bytes
+#define AXGMAC_CFG1_PAD_68 0x00000003 // Pad to 68 bytes

// A-XGMAC Configuration Register 2
#define AXGMAC_CFG2_GEN_PAUSE 0x80000000 // Generate single pause frame (test)
#define AXGMAC_CFG2_LF_MANUAL 0x08000000 // Manual link fault sequence
-#define AXGMAC_CFG2_LF_AUTO 0x04000000 // Auto link fault sequence
+#define AXGMAC_CFG2_LF_AUTO 0x04000000 // Auto link fault sequence
#define AXGMAC_CFG2_LF_REMOTE 0x02000000 // Remote link fault (READ ONLY)
#define AXGMAC_CFG2_LF_LOCAL 0x01000000 // Local link fault (READ ONLY)
#define AXGMAC_CFG2_IPG_MASK 0x001F0000 // Inter packet gap
-#define AXGMAC_CFG2_IPG_SHIFT 16
+#define AXGMAC_CFG2_IPG_SHIFT 16
#define AXGMAC_CFG2_PAUSE_XMT 0x00008000 // Pause transmit module
#define AXGMAC_CFG2_IPG_EXTEN 0x00000020 // Enable IPG extension algorithm
#define AXGMAC_CFG2_IPGEX_MASK 0x0000001F // IPG extension
@@ -299,9 +299,9 @@ typedef struct _SXG_HW_REGS {
#define AXGMAC_SARHIGH_OCTET_SIX 0x00FF0000 // Sixth octet

// A-XGMAC Maximum frame length register
-#define AXGMAC_MAXFRAME_XMT 0x3FFF0000 // Maximum transmit frame length
+#define AXGMAC_MAXFRAME_XMT 0x3FFF0000 // Maximum transmit frame length
#define AXGMAC_MAXFRAME_XMT_SHIFT 16
-#define AXGMAC_MAXFRAME_RCV 0x0000FFFF // Maximum receive frame length
+#define AXGMAC_MAXFRAME_RCV 0x0000FFFF // Maximum receive frame length
// This register doesn't need to be written for standard MTU.
// For jumbo, I'll just statically define the value here. This
// value sets the receive byte count to 9036 (0x234C) and the
@@ -324,34 +324,34 @@ typedef struct _SXG_HW_REGS {

// A-XGMAC AMIIM Field Register
#define AXGMAC_AMIIM_FIELD_ST 0xC0000000 // 2-bit ST field
-#define AXGMAC_AMIIM_FIELD_ST_SHIFT 30
+#define AXGMAC_AMIIM_FIELD_ST_SHIFT 30
#define AXGMAC_AMIIM_FIELD_OP 0x30000000 // 2-bit OP field
-#define AXGMAC_AMIIM_FIELD_OP_SHIFT 28
-#define AXGMAC_AMIIM_FIELD_PORT_ADDR 0x0F800000 // Port address field (hstphyadx in spec)
+#define AXGMAC_AMIIM_FIELD_OP_SHIFT 28
+#define AXGMAC_AMIIM_FIELD_PORT_ADDR 0x0F800000 // Port address field (hstphyadx in spec)
#define AXGMAC_AMIIM_FIELD_PORT_SHIFT 23
#define AXGMAC_AMIIM_FIELD_DEV_ADDR 0x007C0000 // Device address field (hstregadx in spec)
#define AXGMAC_AMIIM_FIELD_DEV_SHIFT 18
#define AXGMAC_AMIIM_FIELD_TA 0x00030000 // 2-bit TA field
-#define AXGMAC_AMIIM_FIELD_TA_SHIFT 16
+#define AXGMAC_AMIIM_FIELD_TA_SHIFT 16
#define AXGMAC_AMIIM_FIELD_DATA 0x0000FFFF // Data field

// Values for the AXGMAC_AMIIM_FIELD_OP field in the A-XGMAC AMIIM Field Register
-#define MIIM_OP_ADDR 0 // MIIM Address set operation
-#define MIIM_OP_WRITE 1 // MIIM Write register operation
-#define MIIM_OP_READ 2 // MIIM Read register operation
+#define MIIM_OP_ADDR 0 // MIIM Address set operation
+#define MIIM_OP_WRITE 1 // MIIM Write register operation
+#define MIIM_OP_READ 2 // MIIM Read register operation
#define MIIM_OP_ADDR_SHIFT (MIIM_OP_ADDR << AXGMAC_AMIIM_FIELD_OP_SHIFT)

// Values for the AXGMAC_AMIIM_FIELD_PORT_ADDR field in the A-XGMAC AMIIM Field Register
-#define MIIM_PORT_NUM 1 // All Sahara MIIM modules use port 1
+#define MIIM_PORT_NUM 1 // All Sahara MIIM modules use port 1

// Values for the AXGMAC_AMIIM_FIELD_DEV_ADDR field in the A-XGMAC AMIIM Field Register
-#define MIIM_DEV_PHY_PMA 1 // PHY PMA/PMD module MIIM device number
-#define MIIM_DEV_PHY_PCS 3 // PHY PCS module MIIM device number
-#define MIIM_DEV_PHY_XS 4 // PHY XS module MIIM device number
-#define MIIM_DEV_XGXS 5 // XGXS MIIM device number
+#define MIIM_DEV_PHY_PMA 1 // PHY PMA/PMD module MIIM device number
+#define MIIM_DEV_PHY_PCS 3 // PHY PCS module MIIM device number
+#define MIIM_DEV_PHY_XS 4 // PHY XS module MIIM device number
+#define MIIM_DEV_XGXS 5 // XGXS MIIM device number

// Values for the AXGMAC_AMIIM_FIELD_TA field in the A-XGMAC AMIIM Field Register
-#define MIIM_TA_10GB 2 // set to 2 for 10 GB operation
+#define MIIM_TA_10GB 2 // set to 2 for 10 GB operation

// A-XGMAC AMIIM Configuration Register
#define AXGMAC_AMIIM_CFG_NOPREAM 0x00000080 // Bypass preamble of mngmt frame
@@ -365,25 +365,25 @@ typedef struct _SXG_HW_REGS {
#define AXGMAC_AMIIM_INDC_BUSY 0x00000001 // Set until cmd operation complete

// Link Status and Control Register
-#define LS_PHY_CLR_RESET 0x80000000 // Clear reset signal to PHY
+#define LS_PHY_CLR_RESET 0x80000000 // Clear reset signal to PHY
#define LS_SERDES_POWER_DOWN 0x40000000 // Power down the Sahara Serdes
-#define LS_XGXS_ENABLE 0x20000000 // Enable the XAUI XGXS logic
-#define LS_XGXS_CTL 0x10000000 // Hold XAUI XGXS logic reset until Serdes is up
-#define LS_SERDES_DOWN 0x08000000 // When 0, XAUI Serdes is up and initialization is complete
-#define LS_TRACE_DOWN 0x04000000 // When 0, Trace Serdes is up and initialization is complete
-#define LS_PHY_CLK_25MHZ 0x02000000 // Set PHY clock to 25 MHz (else 156.125 MHz)
-#define LS_PHY_CLK_EN 0x01000000 // Enable clock to PHY
-#define LS_XAUI_LINK_UP 0x00000010 // XAUI link is up
-#define LS_XAUI_LINK_CHNG 0x00000008 // XAUI link status has changed
-#define LS_LINK_ALARM 0x00000004 // Link alarm pin
-#define LS_ATTN_CTRL_MASK 0x00000003 // Mask link attention control bits
-#define LS_ATTN_ALARM 0x00000000 // 00 => Attn on link alarm
+#define LS_XGXS_ENABLE 0x20000000 // Enable the XAUI XGXS logic
+#define LS_XGXS_CTL 0x10000000 // Hold XAUI XGXS logic reset until Serdes is up
+#define LS_SERDES_DOWN 0x08000000 // When 0, XAUI Serdes is up and initialization is complete
+#define LS_TRACE_DOWN 0x04000000 // When 0, Trace Serdes is up and initialization is complete
+#define LS_PHY_CLK_25MHZ 0x02000000 // Set PHY clock to 25 MHz (else 156.125 MHz)
+#define LS_PHY_CLK_EN 0x01000000 // Enable clock to PHY
+#define LS_XAUI_LINK_UP 0x00000010 // XAUI link is up
+#define LS_XAUI_LINK_CHNG 0x00000008 // XAUI link status has changed
+#define LS_LINK_ALARM 0x00000004 // Link alarm pin
+#define LS_ATTN_CTRL_MASK 0x00000003 // Mask link attention control bits
+#define LS_ATTN_ALARM 0x00000000 // 00 => Attn on link alarm
#define LS_ATTN_ALARM_OR_STAT_CHNG 0x00000001 // 01 => Attn on link alarm or status change
-#define LS_ATTN_STAT_CHNG 0x00000002 // 10 => Attn on link status change
-#define LS_ATTN_NONE 0x00000003 // 11 => no Attn
+#define LS_ATTN_STAT_CHNG 0x00000002 // 10 => Attn on link status change
+#define LS_ATTN_NONE 0x00000003 // 11 => no Attn

// Link Address High Registers
-#define LINK_ADDR_ENABLE 0x80000000 // Enable this link address
+#define LINK_ADDR_ENABLE 0x80000000 // Enable this link address


/***************************************************************************
@@ -396,7 +396,7 @@ typedef struct _SXG_HW_REGS {
#define XGXS_ADDRESS_STATUS1 0x0001 // XS Status 1
#define XGXS_ADDRESS_DEVID_LOW 0x0002 // XS Device ID (low)
#define XGXS_ADDRESS_DEVID_HIGH 0x0003 // XS Device ID (high)
-#define XGXS_ADDRESS_SPEED 0x0004 // XS Speed ability
+#define XGXS_ADDRESS_SPEED 0x0004 // XS Speed ability
#define XGXS_ADDRESS_DEV_LOW 0x0005 // XS Devices in package
#define XGXS_ADDRESS_DEV_HIGH 0x0006 // XS Devices in package
#define XGXS_ADDRESS_STATUS2 0x0008 // XS Status 2
@@ -410,27 +410,27 @@ typedef struct _SXG_HW_REGS {
#define XGXS_ADDRESS_RESET_HI2 0x8003 // Vendor-Specific Reset Hi 2

// XS Control 1 register bit definitions
-#define XGXS_CONTROL1_RESET 0x8000 // Reset - self clearing
+#define XGXS_CONTROL1_RESET 0x8000 // Reset - self clearing
#define XGXS_CONTROL1_LOOPBACK 0x4000 // Enable loopback
#define XGXS_CONTROL1_SPEED1 0x2000 // 0 = unspecified, 1 = 10Gb+
#define XGXS_CONTROL1_LOWPOWER 0x0400 // 1 = Low power mode
#define XGXS_CONTROL1_SPEED2 0x0040 // Same as SPEED1 (?)
-#define XGXS_CONTROL1_SPEED 0x003C // Everything reserved except zero (?)
+#define XGXS_CONTROL1_SPEED 0x003C // Everything reserved except zero (?)

// XS Status 1 register bit definitions
-#define XGXS_STATUS1_FAULT 0x0080 // Fault detected
-#define XGXS_STATUS1_LINK 0x0004 // 1 = Link up
+#define XGXS_STATUS1_FAULT 0x0080 // Fault detected
+#define XGXS_STATUS1_LINK 0x0004 // 1 = Link up
#define XGXS_STATUS1_LOWPOWER 0x0002 // 1 = Low power supported

// XS Speed register bit definitions
-#define XGXS_SPEED_10G 0x0001 // 1 = 10G capable
+#define XGXS_SPEED_10G 0x0001 // 1 = 10G capable

// XS Devices register bit definitions
-#define XGXS_DEVICES_DTE 0x0020 // DTE XS Present
-#define XGXS_DEVICES_PHY 0x0010 // PHY XS Present
-#define XGXS_DEVICES_PCS 0x0008 // PCS Present
-#define XGXS_DEVICES_WIS 0x0004 // WIS Present
-#define XGXS_DEVICES_PMD 0x0002 // PMD/PMA Present
+#define XGXS_DEVICES_DTE 0x0020 // DTE XS Present
+#define XGXS_DEVICES_PHY 0x0010 // PHY XS Present
+#define XGXS_DEVICES_PCS 0x0008 // PCS Present
+#define XGXS_DEVICES_WIS 0x0004 // WIS Present
+#define XGXS_DEVICES_PMD 0x0002 // PMD/PMA Present
#define XGXS_DEVICES_CLAUSE22 0x0001 // Clause 22 registers present

// XS Devices High register bit definitions
@@ -444,18 +444,18 @@ typedef struct _SXG_HW_REGS {
#define XGXS_STATUS2_RCV_FAULT 0x0400 // Receive fault

// XS Package ID High register bit definitions
-#define XGXS_PKGID_HIGH_ORG 0xFC00 // Organizationally Unique
-#define XGXS_PKGID_HIGH_MFG 0x03F0 // Manufacturer Model
-#define XGXS_PKGID_HIGH_REV 0x000F // Revision Number
+#define XGXS_PKGID_HIGH_ORG 0xFC00 // Organizationally Unique
+#define XGXS_PKGID_HIGH_MFG 0x03F0 // Manufacturer Model
+#define XGXS_PKGID_HIGH_REV 0x000F // Revision Number

// XS Lane Status register bit definitions
-#define XGXS_LANE_PHY 0x1000 // PHY/DTE lane alignment status
-#define XGXS_LANE_PATTERN 0x0800 // Pattern testing ability
-#define XGXS_LANE_LOOPBACK 0x0400 // PHY loopback ability
-#define XGXS_LANE_SYNC3 0x0008 // Lane 3 sync
-#define XGXS_LANE_SYNC2 0x0004 // Lane 2 sync
-#define XGXS_LANE_SYNC1 0x0002 // Lane 1 sync
-#define XGXS_LANE_SYNC0 0x0001 // Lane 0 sync
+#define XGXS_LANE_PHY 0x1000 // PHY/DTE lane alignment status
+#define XGXS_LANE_PATTERN 0x0800 // Pattern testing ability
+#define XGXS_LANE_LOOPBACK 0x0400 // PHY loopback ability
+#define XGXS_LANE_SYNC3 0x0008 // Lane 3 sync
+#define XGXS_LANE_SYNC2 0x0004 // Lane 2 sync
+#define XGXS_LANE_SYNC1 0x0002 // Lane 1 sync
+#define XGXS_LANE_SYNC0 0x0001 // Lane 0 sync

// XS Test Control register bit definitions
#define XGXS_TEST_PATTERN_ENABLE 0x0004 // Test pattern enabled
@@ -473,10 +473,10 @@ typedef struct _SXG_HW_REGS {
// LASI (Link Alarm Status Interrupt) Registers (located in MIIM_DEV_PHY_PMA device)
#define LASI_RX_ALARM_CONTROL 0x9000 // LASI RX_ALARM Control
#define LASI_TX_ALARM_CONTROL 0x9001 // LASI TX_ALARM Control
-#define LASI_CONTROL 0x9002 // LASI Control
+#define LASI_CONTROL 0x9002 // LASI Control
#define LASI_RX_ALARM_STATUS 0x9003 // LASI RX_ALARM Status
#define LASI_TX_ALARM_STATUS 0x9004 // LASI TX_ALARM Status
-#define LASI_STATUS 0x9005 // LASI Status
+#define LASI_STATUS 0x9005 // LASI Status

// LASI_CONTROL bit definitions
#define LASI_CTL_RX_ALARM_ENABLE 0x0004 // Enable RX_ALARM interrupts
@@ -489,34 +489,34 @@ typedef struct _SXG_HW_REGS {
#define LASI_STATUS_LS_ALARM 0x0001 // Link Status

// PHY registers - PMA/PMD (device 1)
-#define PHY_PMA_CONTROL1 0x0000 // PMA/PMD Control 1
-#define PHY_PMA_STATUS1 0x0001 // PMA/PMD Status 1
-#define PHY_PMA_RCV_DET 0x000A // PMA/PMD Receive Signal Detect
+#define PHY_PMA_CONTROL1 0x0000 // PMA/PMD Control 1
+#define PHY_PMA_STATUS1 0x0001 // PMA/PMD Status 1
+#define PHY_PMA_RCV_DET 0x000A // PMA/PMD Receive Signal Detect
// other PMA/PMD registers exist and can be defined as needed

// PHY registers - PCS (device 3)
-#define PHY_PCS_CONTROL1 0x0000 // PCS Control 1
-#define PHY_PCS_STATUS1 0x0001 // PCS Status 1
-#define PHY_PCS_10G_STATUS1 0x0020 // PCS 10GBASE-R Status 1
+#define PHY_PCS_CONTROL1 0x0000 // PCS Control 1
+#define PHY_PCS_STATUS1 0x0001 // PCS Status 1
+#define PHY_PCS_10G_STATUS1 0x0020 // PCS 10GBASE-R Status 1
// other PCS registers exist and can be defined as needed

// PHY registers - XS (device 4)
-#define PHY_XS_CONTROL1 0x0000 // XS Control 1
-#define PHY_XS_STATUS1 0x0001 // XS Status 1
-#define PHY_XS_LANE_STATUS 0x0018 // XS Lane Status
+#define PHY_XS_CONTROL1 0x0000 // XS Control 1
+#define PHY_XS_STATUS1 0x0001 // XS Status 1
+#define PHY_XS_LANE_STATUS 0x0018 // XS Lane Status
// other XS registers exist and can be defined as needed

// PHY_PMA_CONTROL1 register bit definitions
-#define PMA_CONTROL1_RESET 0x8000 // PMA/PMD reset
+#define PMA_CONTROL1_RESET 0x8000 // PMA/PMD reset

// PHY_PMA_RCV_DET register bit definitions
-#define PMA_RCV_DETECT 0x0001 // PMA/PMD receive signal detect
+#define PMA_RCV_DETECT 0x0001 // PMA/PMD receive signal detect

// PHY_PCS_10G_STATUS1 register bit definitions
-#define PCS_10B_BLOCK_LOCK 0x0001 // PCS 10GBASE-R locked to receive blocks
+#define PCS_10B_BLOCK_LOCK 0x0001 // PCS 10GBASE-R locked to receive blocks

// PHY_XS_LANE_STATUS register bit definitions
-#define XS_LANE_ALIGN 0x1000 // XS transmit lanes aligned
+#define XS_LANE_ALIGN 0x1000 // XS transmit lanes aligned

// PHY Microcode download data structure
typedef struct _PHY_UCODE {
@@ -558,8 +558,8 @@ typedef struct _XMT_DESC {
// command codes
#define XMT_DESC_CMD_RAW_SEND 0 // raw send descriptor
#define XMT_DESC_CMD_CSUM_INSERT 1 // checksum insert descriptor
-#define XMT_DESC_CMD_FORMAT 2 // format descriptor
-#define XMT_DESC_CMD_PRIME 3 // prime descriptor
+#define XMT_DESC_CMD_FORMAT 2 // format descriptor
+#define XMT_DESC_CMD_PRIME 3 // prime descriptor
#define XMT_DESC_CMD_CODE_SHFT 6 // comand code shift (shift to bits [31:30] in word 0)
// shifted command codes
#define XMT_RAW_SEND (XMT_DESC_CMD_RAW_SEND << XMT_DESC_CMD_CODE_SHFT)
@@ -569,22 +569,22 @@ typedef struct _XMT_DESC {

// XMT_DESC Control Byte (XmtCtl) definitions
// NOTE: These bits do not work on Sahara (Rev A)!
-#define XMT_CTL_PAUSE_FRAME 0x80 // current frame is a pause control frame (for statistics)
+#define XMT_CTL_PAUSE_FRAME 0x80 // current frame is a pause control frame (for statistics)
#define XMT_CTL_CONTROL_FRAME 0x40 // current frame is a control frame (for statistics)
#define XMT_CTL_PER_PKT_QUAL 0x20 // per packet qualifier
#define XMT_CTL_PAD_MODE_NONE 0x00 // do not pad frame
-#define XMT_CTL_PAD_MODE_64 0x08 // pad frame to 64 bytes
+#define XMT_CTL_PAD_MODE_64 0x08 // pad frame to 64 bytes
#define XMT_CTL_PAD_MODE_VLAN_68 0x10 // pad frame to 64 bytes, and VLAN frames to 68 bytes
-#define XMT_CTL_PAD_MODE_68 0x18 // pad frame to 68 bytes
-#define XMT_CTL_GEN_FCS 0x04 // generate FCS (CRC) for this frame
-#define XMT_CTL_DELAY_FCS_0 0x00 // do not delay FCS calcution
-#define XMT_CTL_DELAY_FCS_1 0x01 // delay FCS calculation by 1 (4-byte) word
-#define XMT_CTL_DELAY_FCS_2 0x02 // delay FCS calculation by 2 (4-byte) words
-#define XMT_CTL_DELAY_FCS_3 0x03 // delay FCS calculation by 3 (4-byte) words
+#define XMT_CTL_PAD_MODE_68 0x18 // pad frame to 68 bytes
+#define XMT_CTL_GEN_FCS 0x04 // generate FCS (CRC) for this frame
+#define XMT_CTL_DELAY_FCS_0 0x00 // do not delay FCS calcution
+#define XMT_CTL_DELAY_FCS_1 0x01 // delay FCS calculation by 1 (4-byte) word
+#define XMT_CTL_DELAY_FCS_2 0x02 // delay FCS calculation by 2 (4-byte) words
+#define XMT_CTL_DELAY_FCS_3 0x03 // delay FCS calculation by 3 (4-byte) words

// XMT_DESC XmtBufId definition
-#define XMT_BUF_ID_SHFT 8 // The Xmt buffer ID is formed by dividing
- // the buffer (DRAM) address by 256 (or << 8)
+#define XMT_BUF_ID_SHFT 8 // The Xmt buffer ID is formed by dividing
+ // the buffer (DRAM) address by 256 (or << 8)

/*****************************************************************************
* Receiver Sequencer Definitions
@@ -594,8 +594,8 @@ typedef struct _XMT_DESC {
#define RCV_EVTQ_RBFID_MASK 0x0000FFFF // bit mask for the Receive Buffer ID

// Receive Buffer ID definition
-#define RCV_BUF_ID_SHFT 5 // The Rcv buffer ID is formed by dividing
- // the buffer (DRAM) address by 32 (or << 5)
+#define RCV_BUF_ID_SHFT 5 // The Rcv buffer ID is formed by dividing
+ // the buffer (DRAM) address by 32 (or << 5)

// Format of the 18 byte Receive Buffer returned by the
// Receive Sequencer for received packets
@@ -723,12 +723,12 @@ typedef struct _SXG_CONFIG {
*****************************************************************************/

// Sahara (ASIC level) defines
-#define SAHARA_GRAM_SIZE 0x020000 // GRAM size - 128 KB
-#define SAHARA_DRAM_SIZE 0x200000 // DRAM size - 2 MB
-#define SAHARA_QRAM_SIZE 0x004000 // QRAM size - 16K entries (64 KB)
-#define SAHARA_WCS_SIZE 0x002000 // WCS - 8K instructions (x 108 bits)
+#define SAHARA_GRAM_SIZE 0x020000 // GRAM size - 128 KB
+#define SAHARA_DRAM_SIZE 0x200000 // DRAM size - 2 MB
+#define SAHARA_QRAM_SIZE 0x004000 // QRAM size - 16K entries (64 KB)
+#define SAHARA_WCS_SIZE 0x002000 // WCS - 8K instructions (x 108 bits)

// Arabia (board level) defines
-#define FLASH_SIZE 0x080000 // 512 KB (4 Mb)
-#define EEPROM_SIZE_XFMR 512 // true EEPROM size (bytes), including xfmr area
-#define EEPROM_SIZE_NO_XFMR 256 // EEPROM size excluding xfmr area
+#define FLASH_SIZE 0x080000 // 512 KB (4 Mb)
+#define EEPROM_SIZE_XFMR 512 // true EEPROM size (bytes), including xfmr area
+#define EEPROM_SIZE_NO_XFMR 256 // EEPROM size excluding xfmr area
diff --git a/drivers/staging/sxg/sxgphycode.h b/drivers/staging/sxg/sxgphycode.h
index 26b36c8..8dbaeda 100644
--- a/drivers/staging/sxg/sxgphycode.h
+++ b/drivers/staging/sxg/sxgphycode.h
@@ -34,7 +34,7 @@ static PHY_UCODE PhyUcode[] = {
*/
/* Addr, Data */
{0xc017, 0xfeb0}, /* flip RX_LOS polarity (mandatory */
- /* patch for SFP+ applications) */
+ /* patch for SFP+ applications) */
{0xC001, 0x0428}, /* flip RX serial polarity */

{0xc013, 0xf341}, /* invert lxmit clock (mandatory patch) */
@@ -43,7 +43,7 @@ static PHY_UCODE PhyUcode[] = {
{0xc210, 0x8000}, /* reset datapath (mandatory patch) */
{0xc210, 0x0000}, /* reset datapath (mandatory patch) */
{0x0000, 0x0032}, /* wait for 50ms for datapath reset to */
- /* complete. (mandatory patch) */
+ /* complete. (mandatory patch) */

/* Configure the LED's */
{0xc214, 0x0099}, /* configure the LED drivers */
@@ -52,15 +52,15 @@ static PHY_UCODE PhyUcode[] = {

/* Transceiver-specific MDIO Patches: */
{0xc010, 0x448a}, /* (bit 14) mask out high BER input from the */
- /* LOS signal in 1.000A */
- /* (mandatory patch for SR code)*/
+ /* LOS signal in 1.000A */
+ /* (mandatory patch for SR code) */
{0xc003, 0x0181}, /* (bit 7) enable the CDR inc setting in */
- /* 1.C005 (mandatory patch for SR code) */
+ /* 1.C005 (mandatory patch for SR code) */

/* Transceiver-specific Microcontroller Initialization: */
{0xc04a, 0x5200}, /* activate microcontroller and pause */
{0x0000, 0x0032}, /* wait 50ms for microcontroller before */
- /* writing in code. */
+ /* writing in code. */

/* code block starts here: */
{0xcc00, 0x2009},
--
1.6.0.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Relevant Pages

  • Re: Is there a kgdb for Opteron for linux-2.6?
    ... correct answer if you stop in the middle of the register save or restore code. ... I am working on adding the stack operations so I can tell gdb when to ... * define a register as the reference register, say the stack pointer, ...
    (Linux-Kernel)
  • Re: [RFC] [Crash-utility] Patch to use gdbs bt in crash - works great with kgdb! - KGDB
    ... understand why you wouldn't want to simply use gdb alone ... Note that this register image is in a different order than ... +enum dwarf_form ...
    (Linux-Kernel)
  • Re: Watch Dog Activation, generate Exception Error 0xC0000005
    ... Pretty sure that you need to clear the status register and setup the ... getchar is inconsistent with that. ... beitman AT applieddata DOT net ...
    (microsoft.public.windowsce.app.development)
  • PXA270 I2C register mapping
    ... I wanted to ask if someone can explain to me how the following mapping ... In the spec, the I2C registers are specified as: ... 0x4030_1680 IBMR I2C Bus Monitor register 9-30 ...
    (microsoft.public.windowsce.embedded)
  • Re: PXA270 I2C register mapping
    ... I wanted to ask if someone can explain to me how the following mapping ... In the spec, the I2C registers are specified as: ... 0x4030_1680 IBMR I2C Bus Monitor register 9-30 ...
    (microsoft.public.windowsce.embedded)