Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor

Andreas Herrmann wrote:
On Tue, Jan 20, 2009 at 04:08:41AM -0500, Mark Hounschell wrote:
john stultz wrote:
On Sun, Jan 18, 2009 at 4:38 AM, Mark Hounschell <dmarkh@xxxxxxxxxx> wrote:
I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.

I have tried kernels from 2.6.26 through 2.6.28.

I _can_ however boot these kernels when they are configured for HZ = 250. I
haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
indicated below in the dmesg output.

The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.

While running a 2.6.26.8 kernel configured for HZ = 250:
[snip]
vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
.init : 0xc0373000 - 0xc03a9000 ( 216 kB)
.data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
.text : 0xc0100000 - 0xc02b5336 (1748 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.


The 2.6.26.8 kernel hangs up right here.


CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
This looks suspect. Probably something is off with the timer
interrupt, that's causing the calibration to be way off.

Does booting with hpet=disable change anything?

thanks
-john
John,

I tried this with 2.6.26, 2.6.28, and 2.6.29-rc2. It didn't change anything.

Hi Mark,

I just want to second what Boris already stated.
Obviously your BIOS doesn't properly initialize your CPU.

Your BIOS programs the processor name string as
"AMD Processor model unknown"

I would have expected to see something like "AMD Phenom(tm) II X4"

This shows that the BIOS doesn't know your CPU model and it is an
indication that your CPU is not correctly initialized. Phenom II is a
different CPU model than Phenom and several configuration bits
(e.g. MSRs, CPU config space) need different settings from BIOS
or they even were reserved in previous family 10h CPU models.

IMHO it is a waste of time to try to debug/fix your problem from OS.
First you should update your BIOS. You need to check the "CPU
support"-information from your motherboard vendor to see whether your
motherboard supports Phenom II and which BIOS is required.


Understood and agreed with.

If you know that your BIOS/motherboard are supposed to support Phenom II
and the problem persists then it is a different game and we should
definitely look into your problem.

So what's your BIOS version and motherboard vendor/model?
(And output of dmidecode would be helpful.)



The MB is a Biostar TA770+. It is not yet listed as one with new
BIOS support for the Phenom-II. Only the TA770+ SE is at the moment.
The only difference in the Sata port arrangement and the BIOS type.

I guess I'll just keep pinging them.

Regards
Mark
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Relevant Pages

  • Re: PROBLEM: Cant boot a (HZ = 1000) kernel using an AMD Phenom-II processor
    ... I have tried kernels from 2.6.26 through 2.6.28. ... Obviously your BIOS doesn't properly initialize your CPU. ... different CPU model than Phenom and several configuration bits ...
    (Linux-Kernel)
  • Re: Puzzle
    ... last year I was flashing the BIOS when everything died. ... : The CPU fan ... the RAM, the mobo, or any combination. ...
    (uk.comp.homebuilt)
  • Re: A7N8x Deluxe CPU and FSB Speed Settings
    ... So I've been looking at the BIOS settings, and my question is how do I ... set the right speeds of CPU external frequency, CPU frequency multiple ...
    (alt.comp.periphs.mainboard.asus)
  • Re: A7N8x Deluxe CPU and FSB Speed Settings
    ... So I've been looking at the BIOS settings, and my question is how do I ... set the right speeds of CPU external frequency, CPU frequency multiple ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Wrong CPU being shown by the BIOS
    ... the BIOS screen with a message sayinh. ... "Unknown CPU detected, install latest BIOS to unleash Power" ... Intel Processor Identification Utility. ...
    (alt.comp.hardware.pc-homebuilt)