Re: Marvell 88F6281 Reference design



On Tue, Apr 28, 2009 at 09:00:12AM -0700, Eddie Dawydiuk wrote:

Hello,

Hi,


I have a Marvell 88F6281 Reference design board I'm trying to compile a
2.6.28 kernel for. Although, the machine id check is failing. The error is
as follows

Uncompressing
Linux.............................................................................................................................
. done, booting the kernel.

Error: unrecognized/unsupported machine ID (r1 = 0x0000020f).

Available machine support:

ID (hex) NAME
00000690 Marvell DB-88F6281-BP Development Board
00000691 Marvell RD-88F6192-NAS Development Board
00000692 Marvell RD-88F6281 Reference Board

Please check your kernel config and/or bootloader.

This is because the boot loader passes in the wrong machine ID.

If you have the u-boot "arcNumber" parameter, try setting that to
the correct machine ID before booting the kernel. Otherwise, you
can prepend a bit of code to the zImage that sets the machine ID to
the right value, e.g. for the 6281 RD:

(echo -en "\x06\x1c\xa0\xe3\x92\x10\x81\xe3"; cat zImage) > zImage.rd88f6281

and then use mkimage on zImage.rd88f6281 to create a uImage that you
can boot on the board.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



Relevant Pages

  • Re: Booting after make installworld takes ages [Was Re: Cant boot after make installworld]
    ... world and kernel went smoothly I can boot with new kernel, ... I had a problem in march with booting after 'makeinstall' as stated above. ... I prepared installed bootcode to 3 devices ... Booting over pxe from 1MB 'drive' with bootcode was very fast ...
    (freebsd-stable)
  • Re: [patch] crashdump: fix undefined reference to `elfcorehdr_addr
    ... A minor difficulty is working out where to initialise elfcorehdr_addr. ... There are some kernel bits, ... take special action if they are booting after a kexec on panic (Generally we ... are referring it to booting into kdump kernel) and that's why the notion ...
    (Linux-Kernel)
  • Re: FC4 2.6.14 boot problems
    ... > Booting 'Fedora Core ' ... > Filesystem type is ext2fs, ... OK, booting the kernel. ...
    (Fedora)
  • Re: 2.6.24-rt1: timing problems (was [git pull] x86/hrtimer/acpi fixes)
    ... configuration and dmesg output booting with idle=poll, ... I'll try but it will take me a while to figure git and do a package ... if you want to try a vanilla kernel package then pick up the kernel ... As in the case with an old timing bug, ...
    (Linux-Kernel)
  • Re: unknown command at bootstrap on 7-STABLE
    ... If I let it boot the kernel, the system doesn't show all the booting ... When I type reboot to reboot the machine, ... When there is a major ABI change I install from scratch, rebuild my apps, ... I wouldn't worry about the kernel as the kernel hasn't been loaded the ...
    (comp.unix.bsd.freebsd.misc)