[GIT PATCHES for 2.6.31] V4L/DVB fixes

Linus,

Please pull from:
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git for_linus

This series adds a new gscpca sub-driver for sn9c20x webcams. There are several
popular webcam models supported by those Sonix/Microdia chips.

Greg can remove some linuxdriverproject.org requests from the project Wiki
after this merge ;) Greg, for the USB ID details, you could take a look at
Documentation/video4linux/gspca.txt changes (32 USB ID's added) or at
http://linuxtv.org/wiki/index.php/Gspca. With this series, gspca alone supports
660 different webcam models.

It has also the following fixes:

- gspca:
main: Add support for vidioc_g_chip_ident and vidioc_g/s_register;
stv06xx-hdcs: update the sensor state, fix a sensor sequence bug and
correct the pixelformat;
m5602-s5k4aa: Remove erroneous register writes;
jpeg subdrivers: Check the result of kmalloc(jpeg header);
sonixj: Bad sensor init of non ov76xx sensors.

- em28xx:
Fixes bugs where webcams are detected, but, since there weren't any
sensor code, webcams failed to work;
Auto-detect mt9v011 sensors;
Added support and autodetection code for mt9m001 sensors;
Fixed webcam scaling;
make tuning work for Terratec Cinergy T XS USB (mt352 variant);
fix typo in mt352 init sequence for Terratec Cinergy T XS USB;
make support work for the Pinnacle Hybrid Pro (eb1a:2881);
set GPIO properly for Pinnacle Hybrid Pro analog support;
Make sure the tuner is initialized if generic empia USB id was used;
set demod profile for Pinnacle Hybrid Pro 320e;
fix tuning problem in HVR-900 (R1).

- mt9v011 (new driver on 2.6.32 added on a previous merge):
implement VIDIOC_QUERYCTRL, adds function to calculate fps and adjust
the frequency of the used quartz cristal;

- af9013: auto-detect parameters in case of garbage given by app;

- b2c2-flexcop: regression fix (BZ#13709): properly compile with builtin
frontends;

- bttv: fix regression: tvaudio must be loaded before tuner;

- cx23885-417: fix broken IOCTL handling;

- cx23885: check pointers before dereferencing in dprintk macro.

Cheers,
Mauro.

---

Documentation/video4linux/CARDLIST.em28xx | 2 +-
Documentation/video4linux/gspca.txt | 32 +
drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 67 +-
drivers/media/dvb/frontends/af9013.c | 25 +-
drivers/media/video/bt8xx/bttv-cards.c | 92 +-
drivers/media/video/bt8xx/bttv-driver.c | 1 +
drivers/media/video/bt8xx/bttv.h | 1 +
drivers/media/video/cx23885/cx23885-417.c | 4 +-
drivers/media/video/em28xx/em28xx-cards.c | 134 +-
drivers/media/video/em28xx/em28xx-core.c | 22 +-
drivers/media/video/em28xx/em28xx-dvb.c | 62 +-
drivers/media/video/em28xx/em28xx-video.c | 16 +-
drivers/media/video/em28xx/em28xx.h | 31 +-
drivers/media/video/gspca/Kconfig | 16 +
drivers/media/video/gspca/Makefile | 2 +
drivers/media/video/gspca/conex.c | 2 +
drivers/media/video/gspca/gspca.c | 73 +
drivers/media/video/gspca/gspca.h | 9 +
drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 6 -
drivers/media/video/gspca/mars.c | 2 +
drivers/media/video/gspca/sn9c20x.c | 2434 ++++++++++++++++++++++
drivers/media/video/gspca/sonixj.c | 4 +
drivers/media/video/gspca/spca500.c | 2 +
drivers/media/video/gspca/stk014.c | 2 +
drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c | 16 +-
drivers/media/video/gspca/sunplus.c | 2 +
drivers/media/video/gspca/zc3xx.c | 2 +
drivers/media/video/mt9v011.c | 69 +-
include/linux/videodev2.h | 1 +
include/media/v4l2-chip-ident.h | 12 +
30 files changed, 2973 insertions(+), 170 deletions(-)
create mode 100644 drivers/media/video/gspca/sn9c20x.c

Antti Palosaari (1):
V4L/DVB (12269): af9013: auto-detect parameters in case of garbage given by app

Brian Johnson (2):
V4L/DVB (12282): gspca - main: Support for vidioc_g_chip_ident and vidioc_g/s_register.
V4L/DVB (12283): gspca - sn9c20x: New subdriver for sn9c201 and sn9c202 bridges.

Devin Heitmueller (7):
V4L/DVB (12257): em28xx: make tuning work for Terratec Cinergy T XS USB (mt352 variant)
V4L/DVB (12258): em28xx: fix typo in mt352 init sequence for Terratec Cinergy T XS USB
V4L/DVB (12260): em28xx: make support work for the Pinnacle Hybrid Pro (eb1a:2881)
V4L/DVB (12261): em28xx: set GPIO properly for Pinnacle Hybrid Pro analog support
V4L/DVB (12262): em28xx: Make sure the tuner is initialized if generic empia USB id was used
V4L/DVB (12263): em28xx: set demod profile for Pinnacle Hybrid Pro 320e
V4L/DVB (12265): em28xx: fix tuning problem in HVR-900 (R1)

Erik Andrén (4):
V4L/DVB (12221): gspca - stv06xx-hdcs: Actually update the sensor state
V4L/DVB (12222): gspca - stv06xx-hdcs: Fix sensor sequence bug
V4L/DVB (12223): gspca - stv06xx-hdcs: Correct the pixelformat
V4L/DVB (12224): gspca - m5602-s5k4aa: Remove erroneous register writes

Hans Verkuil (1):
V4L/DVB (12300): bttv: fix regression: tvaudio must be loaded before tuner

Jean-Francois Moine (1):
V4L/DVB (12267): gspca - sonixj: Bad sensor init of non ov76xx sensors.

Julia Lawall (1):
V4L/DVB (12284): gspca - jpeg subdrivers: Check the result of kmalloc(jpeg header).

Mauro Carvalho Chehab (14):
V4L/DVB (12233): em28xx: rename is_27xx to is_webcam
V4L/DVB (12234): em28xx-cards: use is_webcam flag for devices that are known to be webcams
V4L/DVB (12235): em28xx: detects sensors also with the generic em2750/2750 entry
V4L/DVB (12236): em28xx: stop abusing of board->decoder for sensor information
V4L/DVB (12237): mt9v011: implement VIDIOC_QUERYCTRL
V4L/DVB (12238): em28xx: call sensor detection code for all webcam entries
V4L/DVB (12239): em28xx: fix webcam scaling
V4L/DVB (12240): mt9v011: add a function to calculate frames per second rate
V4L/DVB (12241): mt9v011: Fix vstart
V4L/DVB (12242): mt9v011: implement core->s_config to allow adjusting xtal frequency
V4L/DVB (12243): em28xx: allow specifying sensor xtal frequency
V4L/DVB (12244): em28xx: adjust vinmode/vinctl based on the stream input format
V4L/DVB (12245): em28xx: add support for mt9m001 webcams
V4L/DVB (12286): sn9c20x: reorder includes to be like other drivers

Michael Krufky (2):
V4L/DVB (12302): cx23885-417: fix broken IOCTL handling
V4L/DVB (12303): cx23885: check pointers before dereferencing in dprintk macro

Trent Piepho (1):
V4L/DVB (12291): b2c2: fix frontends compiled into kernel

---------------------------------------------------
V4L/DVB development is hosted at http://linuxtv.org
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Relevant Pages

  • Re: MSI: Dont buy our webcam
    ... On the box of this webcam is clearly written what OS's are supported! ... Do you mention to the vendors that you intend to use their hardware ... Did you mention to MSI that you use the webcam with Linux? ... Ubuntu / PetOS do not support the hardware that I need it to support, ...
    (Ubuntu)
  • Re: Webcam Hardware and Software Advice Request
    ... you must be using a kernel with video4linux and usb support ... to use the webcam. ... > I want to connect a USB webcam to my home PC which runs Debian Woody ...
    (Debian-User)
  • Re: Intel usb camera on FC6
    ... >>> I guess it doesn't support the camera after all, ... Smack in the middle is the 0733:0401 Intel CS330 webcam entry and it ... shows it as working with the spca50x driver. ... Rick Stevens, ...
    (Fedora)
  • Re: Webcam & xsane in 8.10RC
    ... Seems to have support for your webcam. ... 900NC webcam not working and Scanner not working. ... I think Ubuntu uses gspca V2 in the 8.10 release. ...
    (Ubuntu)
  • Re: Webcam video to external storage device
    ... buy an Ethernet or Firewire webcam. ... Orange Micro makes a webcam called Ibot ... Firewire or firewire Pro which use the same Sony icx098AK CCD sensor as the ...
    (sci.astro.amateur)
Loading