[PATCH 05/11] ACPI, x86: expose some IO-APIC routines when CONFIG_ACPI=n



From: Feng Tang <feng.tang@xxxxxxxxx>

Some IO-APIC routines are ACPI specific now, but need to
be exposed when CONFIG_ACPI=n for the benefit of SFI.

Remove #ifdef ACPI around these routines:

io_apic_get_unique_id(int ioapic, int apic_id);
io_apic_get_version(int ioapic);
io_apic_get_redir_entries(int ioapic);

Move these routines from ACPI-specific boot.c to io_apic.c:

uniq_ioapic_id(u8 id)
mp_find_ioapic()
mp_find_ioapic_pin()
mp_register_ioapic()

Also, since uniq_ioapic_id() is now no longer static,
re-name it to io_apic_unique_id() for consistency
with the other public io_apic routines.

For simplicity, do not #ifdef the resulting code ACPI || SFI,
thought that could be done in the future if it is important
to optimize the !ACPI !SFI IO-APIC x86 kernel for size.

Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>
Cc: x86@xxxxxxxxxx
---
arch/x86/include/asm/io_apic.h | 13 ++++-
arch/x86/kernel/acpi/boot.c | 102 +---------------------------------------
arch/x86/kernel/apic/io_apic.c | 103 +++++++++++++++++++++++++++++++++++++--
3 files changed, 109 insertions(+), 109 deletions(-)

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 330ee80..85232d3 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -150,11 +150,10 @@ extern int timer_through_8259;
#define io_apic_assign_pci_irqs \
(mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)

-#ifdef CONFIG_ACPI
+extern u8 io_apic_unique_id(u8 id);
extern int io_apic_get_unique_id(int ioapic, int apic_id);
extern int io_apic_get_version(int ioapic);
extern int io_apic_get_redir_entries(int ioapic);
-#endif /* CONFIG_ACPI */

struct io_apic_irq_attr;
extern int io_apic_set_pci_routing(struct device *dev, int irq,
@@ -177,6 +176,16 @@ extern int setup_ioapic_entry(int apic, int irq,
int polarity, int vector, int pin);
extern void ioapic_write_entry(int apic, int pin,
struct IO_APIC_route_entry e);
+
+struct mp_ioapic_gsi{
+ int gsi_base;
+ int gsi_end;
+};
+extern struct mp_ioapic_gsi mp_gsi_routing[];
+int mp_find_ioapic(int gsi);
+int mp_find_ioapic_pin(int ioapic, int gsi);
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
+
#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
static const int timer_through_8259 = 0;
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 6b8ca3a..7e62d1e 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -833,106 +833,6 @@ static int __init acpi_parse_madt_lapic_entries(void)
extern int es7000_plat;
#endif

-static struct {
- int gsi_base;
- int gsi_end;
-} mp_ioapic_routing[MAX_IO_APICS];
-
-int mp_find_ioapic(int gsi)
-{
- int i = 0;
-
- /* Find the IOAPIC that manages this GSI. */
- for (i = 0; i < nr_ioapics; i++) {
- if ((gsi >= mp_ioapic_routing[i].gsi_base)
- && (gsi <= mp_ioapic_routing[i].gsi_end))
- return i;
- }
-
- printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
- return -1;
-}
-
-int mp_find_ioapic_pin(int ioapic, int gsi)
-{
- if (WARN_ON(ioapic == -1))
- return -1;
- if (WARN_ON(gsi > mp_ioapic_routing[ioapic].gsi_end))
- return -1;
-
- return gsi - mp_ioapic_routing[ioapic].gsi_base;
-}
-
-static u8 __init uniq_ioapic_id(u8 id)
-{
-#ifdef CONFIG_X86_32
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
- !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
- return io_apic_get_unique_id(nr_ioapics, id);
- else
- return id;
-#else
- int i;
- DECLARE_BITMAP(used, 256);
- bitmap_zero(used, 256);
- for (i = 0; i < nr_ioapics; i++) {
- struct mpc_ioapic *ia = &mp_ioapics[i];
- __set_bit(ia->apicid, used);
- }
- if (!test_bit(id, used))
- return id;
- return find_first_zero_bit(used, 256);
-#endif
-}
-
-static int bad_ioapic(unsigned long address)
-{
- if (nr_ioapics >= MAX_IO_APICS) {
- printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
- "(found %d)\n", MAX_IO_APICS, nr_ioapics);
- panic("Recompile kernel with bigger MAX_IO_APICS!\n");
- }
- if (!address) {
- printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
- " found in table, skipping!\n");
- return 1;
- }
- return 0;
-}
-
-void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
-{
- int idx = 0;
-
- if (bad_ioapic(address))
- return;
-
- idx = nr_ioapics;
-
- mp_ioapics[idx].type = MP_IOAPIC;
- mp_ioapics[idx].flags = MPC_APIC_USABLE;
- mp_ioapics[idx].apicaddr = address;
-
- set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
- mp_ioapics[idx].apicid = uniq_ioapic_id(id);
- mp_ioapics[idx].apicver = io_apic_get_version(idx);
-
- /*
- * Build basic GSI lookup table to facilitate gsi->io_apic lookups
- * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
- */
- mp_ioapic_routing[idx].gsi_base = gsi_base;
- mp_ioapic_routing[idx].gsi_end = gsi_base +
- io_apic_get_redir_entries(idx);
-
- printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
- "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
- mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
- mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
-
- nr_ioapics++;
-}
-
int __init acpi_probe_gsi(void)
{
int idx;
@@ -947,7 +847,7 @@ int __init acpi_probe_gsi(void)

max_gsi = 0;
for (idx = 0; idx < nr_ioapics; idx++) {
- gsi = mp_ioapic_routing[idx].gsi_end;
+ gsi = mp_gsi_routing[idx].gsi_end;

if (gsi > max_gsi)
max_gsi = gsi;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index d2ed6c5..a8c0232 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -85,6 +85,9 @@ int nr_ioapic_registers[MAX_IO_APICS];
struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
int nr_ioapics;

+/* IO APIC gsi routing info */
+struct mp_ioapic_gsi mp_gsi_routing[MAX_IO_APICS];
+
/* MP IRQ source entries */
struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];

@@ -3941,11 +3944,28 @@ int io_apic_set_pci_routing(struct device *dev, int irq,
return __io_apic_set_pci_routing(dev, irq, irq_attr);
}

-/* --------------------------------------------------------------------------
- ACPI-based IOAPIC Configuration
- -------------------------------------------------------------------------- */
+u8 __init io_apic_unique_id(u8 id)
+{
+#ifdef CONFIG_X86_32
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+ !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+ return io_apic_get_unique_id(nr_ioapics, id);
+ else
+ return id;
+#else
+ int i;
+ DECLARE_BITMAP(used, 256);

-#ifdef CONFIG_ACPI
+ bitmap_zero(used, 256);
+ for (i = 0; i < nr_ioapics; i++) {
+ struct mpc_ioapic *ia = &mp_ioapics[i];
+ __set_bit(ia->apicid, used);
+ }
+ if (!test_bit(id, used))
+ return id;
+ return find_first_zero_bit(used, 256);
+#endif
+}

#ifdef CONFIG_X86_32
int __init io_apic_get_unique_id(int ioapic, int apic_id)
@@ -4054,8 +4074,6 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
return 0;
}

-#endif /* CONFIG_ACPI */
-
/*
* This function currently is only a helper for the i386 smp boot process where
* we need to reprogram the ioredtbls to cater for the cpus which have come online
@@ -4201,3 +4219,76 @@ void __init ioapic_insert_resources(void)
r++;
}
}
+
+int mp_find_ioapic(int gsi)
+{
+ int i = 0;
+
+ /* Find the IOAPIC that manages this GSI. */
+ for (i = 0; i < nr_ioapics; i++) {
+ if ((gsi >= mp_gsi_routing[i].gsi_base)
+ && (gsi <= mp_gsi_routing[i].gsi_end))
+ return i;
+ }
+
+ printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+ return -1;
+}
+
+int mp_find_ioapic_pin(int ioapic, int gsi)
+{
+ if (WARN_ON(ioapic == -1))
+ return -1;
+ if (WARN_ON(gsi > mp_gsi_routing[ioapic].gsi_end))
+ return -1;
+
+ return gsi - mp_gsi_routing[ioapic].gsi_base;
+}
+
+static int bad_ioapic(unsigned long address)
+{
+ if (nr_ioapics >= MAX_IO_APICS) {
+ printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded "
+ "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics);
+ return 1;
+ }
+ if (!address) {
+ printk(KERN_WARNING "WARNING: Bogus (zero) I/O APIC address"
+ " found in table, skipping!\n");
+ return 1;
+ }
+ return 0;
+}
+
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
+{
+ int idx = 0;
+
+ if (bad_ioapic(address))
+ return;
+
+ idx = nr_ioapics;
+
+ mp_ioapics[idx].type = MP_IOAPIC;
+ mp_ioapics[idx].flags = MPC_APIC_USABLE;
+ mp_ioapics[idx].apicaddr = address;
+
+ set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+ mp_ioapics[idx].apicid = io_apic_unique_id(id);
+ mp_ioapics[idx].apicver = io_apic_get_version(idx);
+
+ /*
+ * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+ * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
+ */
+ mp_gsi_routing[idx].gsi_base = gsi_base;
+ mp_gsi_routing[idx].gsi_end = gsi_base +
+ io_apic_get_redir_entries(idx);
+
+ printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
+ "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
+ mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
+ mp_gsi_routing[idx].gsi_base, mp_gsi_routing[idx].gsi_end);
+
+ nr_ioapics++;
+}
--
1.6.0.6

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



Relevant Pages

  • Re: [2.6.31.13] Build failure at arch/x86/kernel/apic/io_apic.c
    ... Why would you want to build without ACPI on any modern system? ... Some IO-APIC routines are ACPI specific now, ... be exposed when CONFIG_ACPI=n for the benefit of SFI. ... Remove #ifdef ACPI around these routines: ...
    (Linux-Kernel)
  • Re: Proper use of scanf
    ... have published some routines which operate directly on the input ... Barring EOF it will NOT be a digit. ... This forbids overflow, ... int readxwd ...
    (comp.lang.c)
  • [PATCH 15/20] inflate: (arch) tidy user declarations
    ... bulk of the users are now _not_ a collection of routines copied from ... * Modified for ARM Linux by Russell King ... static int input_data_size; ... - * gzip declarations ...
    (Linux-Kernel)
  • Bulletproof reading of ints (was Re: string concatenation)
    ... this overflow is not caught. ... not happy with the EOF treatment on systems with non-sticky EOF ... return positive int for error, 0 for no error, and EOF for EOF. ... /* These stream input routines are written so that simple ...
    (comp.unix.programmer)
  • Bulletproof reading of ints (was Re: string concatenation)
    ... this overflow is not caught. ... not happy with the EOF treatment on systems with non-sticky EOF ... return positive int for error, 0 for no error, and EOF for EOF. ... /* These stream input routines are written so that simple ...
    (comp.lang.c)