[PATCH] k10temp: temperature sensor for AMD Family 10h/11h CPUs

This adds a driver for the internal temperature sensor of AMD Family 10h
and 11h CPUs.

Signed-off-by: Clemens Ladisch <clemens@xxxxxxxxxx>
---
Documentation/hwmon/k10temp | 54 +++++++++++++++++
drivers/hwmon/Kconfig | 12 +++
drivers/hwmon/Makefile | 1
drivers/hwmon/k10temp.c | 135 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 202 insertions(+)

--- /dev/null
+++ linux-2.6/Documentation/hwmon/k10temp
@@ -0,0 +1,54 @@
+Kernel driver k10temp
+=====================
+
+Supported chips:
+* AMD Family 10h processors:
+ Socket F: Quad-Core/Six-Core/Embedded AMD Opteron
+ Socket AM2+: Phenom II X3/X4
+ Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II
+ mobile: Athlon II, Sempron, Turion II
+
+ Prefix: 'k10temp'
+ Addresses scanned: PCI space
+ Datasheets: see http://developer.amd.com/documentation/guides/
+ #31116: BIOS and Kernel Developer's Guide For AMD Family 10h Processors
+ #41322: Revision Guide for AMD Family 10h Processors
+
+* AMD Family 11h processors:
+ mobile: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+
+ Prefix: 'k10temp'
+ Addresses scanned: PCI space
+ Datasheets: see http://developer.amd.com/documentation/guides/
+ #41256: BIOS and Kernel Developer's Guide For AMD Family 11h Processors
+ #41788: Revision Guide for AMD Family 11h Processors
+
+Author: Clemens Ladisch <clemens@xxxxxxxxxx>
+
+Description
+-----------
+
+This driver permits reading of the internal temperature sensor of AMD
+Family 10h and 11h processors.
+
+All these processors have a sensor, but on older revisions of Family 10h
+processors, the sensor returns inconsistent values (erratum 319). The driver
+refuses to load with these revisions (DR-BA, DR-B2, DR-B3: some Embedded
+Opterons on Socket F; and Quad-Core Opteron, Phenom Triple/Quad-Core, and
+Athon Dual-Core on Socket AM2+). All later revisions (RB-C2, BL-C2, DA-C2,
+RB-C3, HY-D0) work fine; see the list above.
+
+There is one temperature value, available as temp1_input in sysfs. It is
+measured in degrees Celsius with a resolution of 1/8th degree. Please note
+that it is defined as a relative value; to quote the AMD manual:
+
+ Tctl is the processor temperatur control value, used by the platform to
+ control cooling systems. Tctl is a non-physical temperature on an arbitrary
+ scale measured in degrees. It does _not_ represent an actual physical
+ temperature like die or case temperature. Instead, it specifies the
+ processor temperature relative to the point at which the system must supply
+ the maximum cooling for the processor's specified maximum case temperature
+ and maximum thermal power dissipation.
+
+The maximum value for Tctl is usually defined as 70 degrees, so, as a rule of
+thumb, this value should not exceed 60 degrees.
--- linux-2.6/drivers/hwmon/Kconfig
+++ linux-2.6/drivers/hwmon/Kconfig
@@ -222,6 +222,18 @@ config SENSORS_K8TEMP
This driver can also be built as a module. If so, the module
will be called k8temp.

+config SENSORS_K10TEMP
+ tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
+ depends on X86 && PCI
+ help
+ If you say yes here you get support for the temperature
+ sensor inside your CPU. Supported are later revisions of
+ the AMD Family 10h and all revisions of the AMD Family 11h
+ microarchitectures.
+
+ This driver can also be built as a module. If so, the module
+ will be called k10temp.
+
config SENSORS_AMS
tristate "Apple Motion Sensor driver"
depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
--- linux-2.6/drivers/hwmon/Makefile
+++ linux-2.6/drivers/hwmon/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o
obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
+obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o
obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o
obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o
obj-$(CONFIG_SENSORS_LM63) += lm63.o
--- /dev/null
+++ linux-2.6/drivers/hwmon/k10temp.c
@@ -0,0 +1,135 @@
+/*
+ * k10temp.c - AMD Family 10h/11h CPUs hardware monitoring
+ *
+ * Copyright (c) 2009 Clemens Ladisch <clemens@xxxxxxxxxx>
+ *
+ *
+ * This driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this driver; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <asm/processor.h>
+
+MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor");
+MODULE_AUTHOR("Clemens Ladisch <clemens@xxxxxxxxxx>");
+MODULE_LICENSE("GPL");
+
+#define REG_REPORTED_TEMPERATURE 0xa4
+#define CURTMP_TO_MILLIDEGREES(regval) (((regval) >> 21) * 125)
+
+static ssize_t show_temp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u32 regval;
+
+ pci_read_config_dword(to_pci_dev(dev),
+ REG_REPORTED_TEMPERATURE, &regval);
+ return sprintf(buf, "%u\n", CURTMP_TO_MILLIDEGREES(regval));
+}
+
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "k10temp\n");
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+static bool __devinit has_erratum_319(void)
+{
+ /*
+ * Erratum 319: The thermal sensor of older Family 10h processors
+ * (B steppings) is unreliable.
+ */
+ return boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model <= 2;
+}
+
+static int __devinit k10temp_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct device *hwmon_dev;
+ int err;
+
+ if (has_erratum_319()) {
+ dev_err(&pdev->dev,
+ "unreliable CPU thermal sensor; monitoring disabled\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+ err = device_create_file(&pdev->dev,
+ &sensor_dev_attr_temp1_input.dev_attr);
+ if (err)
+ goto exit;
+
+ err = device_create_file(&pdev->dev, &dev_attr_name);
+ if (err)
+ goto exit_remove1;
+
+ hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(hwmon_dev)) {
+ err = PTR_ERR(hwmon_dev);
+ goto exit_remove2;
+ }
+
+ dev_set_drvdata(&pdev->dev, hwmon_dev);
+ return 0;
+
+exit_remove2:
+ device_remove_file(&pdev->dev, &dev_attr_name);
+exit_remove1:
+ device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_input.dev_attr);
+exit:
+ return err;
+}
+
+static void __devexit k10temp_remove(struct pci_dev *pdev)
+{
+ hwmon_device_unregister(dev_get_drvdata(&pdev->dev));
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_input.dev_attr);
+ dev_set_drvdata(&pdev->dev, NULL);
+}
+
+static struct pci_device_id k10temp_id_table[] = {
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
+ {}
+};
+MODULE_DEVICE_TABLE(pci, k10temp_id_table);
+
+static struct pci_driver k10temp_driver = {
+ .name = "k10temp",
+ .id_table = k10temp_id_table,
+ .probe = k10temp_probe,
+ .remove = __devexit_p(k10temp_remove),
+};
+
+static int __init k10temp_init(void)
+{
+ return pci_register_driver(&k10temp_driver);
+}
+
+static void __exit k10temp_exit(void)
+{
+ pci_unregister_driver(&k10temp_driver);
+}
+
+module_init(k10temp_init)
+module_exit(k10temp_exit)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Relevant Pages

  • [PATCH v2] adt7473: New driver for Analog Devices ADT7473 sensor chip
    ... New driver for Analog Devices ADT7473 sensor chip ... This driver reports voltage, temperature and fan sensor readings ... on an ADT7473 chip. ...
    (Linux-Kernel)
  • [PATCH] new hwmon driver adt7462
    ... This driver has been tested on an IntelliStation ... +This driver implements support for the Analog Devices ADT7462 chip family. ... +A sophisticated control system for the PWM outputs is designed into the ADT7462 ... +Each of the measured inputs (voltage, temperature, fan speed) has ...
    (Linux-Kernel)
  • [PATCH 1/5] adt7462: New hwmon driver
    ... This driver has been tested on an IntelliStation ... +This driver implements support for the Analog Devices ADT7462 chip family. ... +A sophisticated control system for the PWM outputs is designed into the ADT7462 ... +Each of the measured inputs (voltage, temperature, fan speed) has ...
    (Linux-Kernel)
  • [PATCH v4] k10temp: temperature sensor for AMD Family 10h/11h CPUs
    ... This adds a driver for the internal temperature sensor of AMD Family 10h ... AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet: ...
    (Linux-Kernel)
  • [PATCH v3] k10temp: temperature sensor for AMD Family 10h/11h CPUs
    ... This adds a driver for the internal temperature sensor of AMD Family 10h ... AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet: ...
    (Linux-Kernel)