Re: [linux-pm] intermittent suspend problem again

On Saturday 28 November 2009, Ferenc Wagner wrote:
"Rafael J. Wysocki" <rjw@xxxxxxx> writes:

On Wednesday 18 November 2009, Ferenc Wagner wrote:

Ferenc Wagner <wferi@xxxxxxx> writes:

Since I've instrumented s2disk and the hibernation path, no freeze
happened during hibernating the machine.

Not until I removed the delays from hibernation_platform_enter(), which
were put there previously to get step-by-step feedback. Removing them
again resulted in a freeze in short course, maybe just two hibernations
later. The instrumentation shows it stuck in dpm_suspend_start(PMSG_HIBERNATE).
Does it mean that some device driver is at fault?

A driver or one of the platform hooks.

I'll check if it always fails at the same point (although tracing into
dpm_suspend_start isn't pure fun because of the multitude of devices it
loops over). Is there any way to get printk output from that phase?

Compile with CONFIG_PM_VERBOSE (it does mean exactly that).

The last message now was:

e100: 0000:02:08.0: hibernate, may wakeup

Looks like hibernating the e100 driver is unstable.

Can you verify that by trying to hibernate without the e100 driver?

Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Relevant Pages

  • Re: [linux-pm] intermittent suspend problem again
    ... A driver or one of the platform hooks. ... Is there any way to get printk output from that phase? ... Looks like hibernating the e100 driver is unstable. ... running with suspend loglevel = 8, it's happened only twice, ...
    (Linux-Kernel)
  • Re: [linux-pm] intermittent suspend problem again
    ... A driver or one of the platform hooks. ... Is there any way to get printk output from that phase? ... Looks like hibernating the e100 driver is unstable. ... hibernation/resume cycles in a tight loop using the RTC wakealarm. ...
    (Linux-Kernel)
  • Re: [linux-pm] intermittent suspend problem again
    ... Removing them ... Does it mean that some device driver is at fault? ... A driver or one of the platform hooks. ... Looks like hibernating the e100 driver is unstable. ...
    (Linux-Kernel)
  • ieee1394 driver resume blue screen
    ... I am using a driver for IEEE1394 DCAM-compliant cameras (sources can be ... When hibernating with this driver loaded, I get a blue screen at resume, ... way to prevent system hibernation if this driver is loaded? ...
    (microsoft.public.development.device.drivers)
  • Re: [linux-pm] intermittent suspend problem again
    ... happened during hibernating the machine. ... The instrumentation shows it stuck in dpm_suspend_start. ... Does it mean that some device driver is at fault? ... fires before the "Snapshotting system" phase, but it does not fire if I ...
    (Linux-Kernel)