RE: Ethernet & DHCP Fails on Cable Modem to Internet

From: Rigler, Steve (SRigler_at_MarathonOil.com)
Date: 08/07/03

  • Next message: Jason Staudenmayer: "RE: Ethernet & DHCP Fails on Cable Modem to Internet" 
    To: <redhat-list@redhat.com>
Date: Thu, 7 Aug 2003 10:50:17 -0500

    Ken,

    Maybe you've already tried this, but my cable modem has a "feature"
    which requires it to be reset every time a new device is plugged
    into it.

    -Steve

    > -----Original Message-----
    > From: Ken Plumley [mailto:ken_plumley@yahoo.com]
    > Sent: Thursday, August 07, 2003 10:47 AM
    > To: redhat-list@redhat.com
    > Subject: RE: Ethernet & DHCP Fails on Cable Modem to Internet
    >
    >
    > Jason,
    >
    > The nic is an SMC EZ 10/100 the driver loaded for it
    > is the RealTek RTL-8139.
    >
    > I tested the nic with a fixed IP and was able to
    > access other machines on the LAN.
    >
    > Ken
    > 

    -- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
  • Next message: Jason Staudenmayer: "RE: Ethernet & DHCP Fails on Cable Modem to Internet"

    Relevant Pages

    • Re: Unable to renew IP Address
      ... If you used the reset button on the cable modem you may have set it back to factory defaults. ... Was working fine, but then lost access. ... "unable to renew IP address". ...
      (microsoft.public.windowsxp.hardware)
    • rl network driver / patch for peppercon card
      ... Networking works with standard FreeBSD driver, but not the reset ... I only use the reset feature, ... Some peppercon developer was very kind and made a patch for if_rl.c ... This Patch works about 1 year. ...
      (freebsd-current)
    • Re: No reset button
      ... Unfortunately it doesn't feature a reset button. ... Look in the mobo manual for the connections to a reset switch. ... Power on etc are usually in a long line next ... to each otherononeof the edges of the mother board. ...
      (uk.comp.misc)
    • Re: No reset button
      ... Unfortunately it doesn't feature a reset button. ... Look in the mobo manual for the connections to a reset switch. ... socket rather than just two pins as part of a larger socket? ... to each otherononeof the edges of the mother board. ...
      (uk.comp.misc)
    • Re: Problem with audio apps and mixer
      ... this feature takes the pid of the app and preserves the volume for the pid. ... pausing etc. so so the volume get's reset while the app is still running. ... channel volume will be reset to 0db ... for other applications trying to re-open the same ...
      (freebsd-questions)