redhat 7.3 installation

From: TP R Murthy (r.murthy_at_ceruleaninfotech.com)
Date: 08/27/03

Next message: fred smith: "Re: Copy entire hard disk - how ?"

Previous message: Le Ngoc Thach: "Re: Ping and nslookup, dig"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

To: redhat-list@redhat.com
Date: Wed, 27 Aug 2003 15:50:56 +0530 (IST)

hi,

i have been installing the redhat 7.3 on some machines at office.

all the systems crash after some time. keyboard, mouse and everything
stops working. the monitor freezes.

when i looked at the dmesg, this is what i found

Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 202M
agpgart: Detected an Intel i810 E Chipset.
agpgart: detected 4MB dedicated video ram.
agpgart: AGP aperture is 64M @ 0xe4000000
[drm] AGP 0.99 on Intel i810 @ 0xe4000000 64MB
[drm] Initialized i810 1.2.0 20010920 on minor 0
mtrr: base(0xe4000000) is not aligned on a size(0x12c000) boundary
memory : cfe10ea0
memory : cfe10ee0
memory : cfe10f20

This happens on all the hosts that i installed linux. Those machines that
are working fine do not have these error messages.

appreciate anyone helping me fix this problem.

regards,

output of dmesg:

Linux version 2.4.18-3 (bhcompile@daffy.perf.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #1 Thu Apr 18 07:37:53 EDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000feec000 (usable)
BIOS-e820: 000000000feec000 - 000000000feef000 (ACPI data)
BIOS-e820: 000000000feef000 - 000000000feff000 (reserved)
BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 65260
zone(0): 4096 pages.
zone(1): 61164 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/hda5
Initializing CPU#0
Detected 936.659 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1867.77 BogoMIPS
Memory: 254412k/261040k available (1119k kernel code, 6240k reserved, 775k data, 280k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0900, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 480 slots per queue, batch=120
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 2
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:pio
hda: ST340810A, ATA DISK drive
hdb: SAMSUNG CD-ROM SC-152L, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
blk: queue c035e6a4, I/O limit 4095Mb (mask 0xffffffff)
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 122k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 280k freed
Adding Swap: 522072k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 07:43:07 Apr 18 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 5 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ide-floppy driver 0.99.newide
hdb: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdb: DMA disabled
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
8139too Fast Ethernet driver 0.9.24
PCI: Found IRQ 10 for device 01:09.0
PCI: Sharing IRQ 10 with 00:1f.3
eth0: RealTek RTL8139 Fast Ethernet at 0xd08b3000, 00:0b:2b:0b:56:ed, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 202M
agpgart: Detected an Intel i810 E Chipset.
agpgart: detected 4MB dedicated video ram.
agpgart: AGP aperture is 64M @ 0xe4000000
[drm] AGP 0.99 on Intel i810 @ 0xe4000000 64MB
[drm] Initialized i810 1.2.0 20010920 on minor 0
mtrr: base(0xe4000000) is not aligned on a size(0x12c000) boundary
memory : cfe10ea0
memory : cfe10ee0
memory : cfe10f20
mtrr: base(0xe4000000) is not aligned on a size(0x12c000) boundary
memory : cfe10ee0
memory : cfe10f20
memory : cfe10e20

-- 
_________________________________________________________________
TP R Murthy (Systems Analyst)
Cerulean Information Technology Pvt. Ltd.
#24, floor#2, 5th Main, 5th Block, Koramangala, Bangalore-560 095.
Phone: 299-1886, 299-1897
Mobile: 98451 14346
web:http://www.ceruleaninfotech.com
_________________________________________________________________
    
    "I do not feel obliged to believe that the same God who 
     has endowed us with sense, reason, and intellect has 
     intended us to forgo their use."
                -- Galileo Galilei
-- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

Next message: fred smith: "Re: Copy entire hard disk - how ?"

Previous message: Le Ngoc Thach: "Re: Ping and nslookup, dig"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Relevant Pages

PROBLEM: Memory leak in -test9?
... There seems to be a memory leak in 2.6.0-test9. ... 0cf8-0cff: PCI conf1 ... 16 nodes reported by PnP BIOS; 16 recorded by driver ... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ...
(Linux-Kernel)
Redhat 9 with Intel Corp.|82801EB AC97 Audio / SOUNDMAX Sound card
... Memory: 244908k/253888k available (1358k kernel code, 6612k reserved, ... PCI: PCI BIOS revision 2.20 entry at 0xec548, ... Serial driver version 5.05c with MANY_PORTS MULTIPORT ... usb.c: new USB bus registered, ...
(comp.os.linux.hardware)
Re: [PATCH RFC v5] net: add PCINet driver
... These are PCI boards, not PCIe. ... I tried enabling MSI on the Freescale boards in the driver, ... does not have an interrupt line. ... Scanning 0 areas for low memory corruption ...
(Linux-Kernel)
interrupt trouble with 8139too, r128
... I have got an Athlon PC with two pci network cards that are handled by ... Try the "8139too" driver instead. ... agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. ...
(comp.os.linux.development.system)
Re: Problem mapping small PCI memory space.
... If I try to expose it through mmap, ... > access that 512 bytes memory by using ioremapon the physical address ... > Are there any lower limits on the size of a PCI memory region? ... You impliment mmapin your driver. ...
(Linux-Kernel)