cisco vpn 3000 linux client nat help

From: Vince Scimeca (vscimeca_at_jupitermedia.com)
Date: 09/26/03

  • Next message: Rodolfo J. Paiz: "Re: NAT tutorial" 
    To: redhat-list@redhat.com
Date: Thu, 25 Sep 2003 21:33:55 -0400

    RH 9
    kernel 2.4.20-20.9
    cisco vpn 3000 linux client 4.0.1
    Optonline Cable Internet connection

    I have been trying on and off for months to get the Cisco VPN 3000
    client for linux configured. I have followed all the cisco
    documentation concerning this install and configuration to t with no
    success. Previous to the 3000 client I had the 5000 client on linux in
    use with no issues. Since we upgraded to the 3000 concentrator I have
    not been able to get this to work.

    When running the connect command this is the output I get:

    #vpnclient connect "full access"
    Cisco Systems VPN Client Version 4.0.1 (A)
    Copyright (C) 1998-2003 Cisco Systems, Inc. All Rights Reserved.
    Client Type(s): Linux
    Running on: Linux 2.4.20-20.9 #1 Mon Aug 18 11:45:58 EDT 2003 i686
     
    Initializing the VPN connection.
    Contacting the gateway at <vpn ip address>
    Secure VPN Connection terminated locally by the Client
    Reason: User authentication failed.
    There are no new notification messages at this time.

    I believe this has something to so with NAT. I have googled to see if
    there are similar issues and I had looked to see how I should address
    this issue if it is NAT related but I have no clear direction to go in
    at this point.

    Has anyone else had similar issues with the Cisco VPN 3000 on Linux?
    Any help would be very appreciated.

    thanks
    Vince

    \ 

    -- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
  • Next message: Rodolfo J. Paiz: "Re: NAT tutorial"

    Relevant Pages

    • Re: Secured Linux box for Windows access
      ... On the client side, I can automatically remove temp files, harden up ... > struggling with the Linux side and its configuration. ... it is possible to use a VPN to secure your shares as tehy go ... distribution-specific guides to security. ...
      (Security-Basics)
    • Cicso Linux VPN Client problems
      ... I am relatively new to Linux ... We are attempting to establish a VPN to a client's system. ... client has a Cisco PIX Firewall 515 and I have been attempting to ... Copyright 1998-2002 Cisco Systems, ...
      (RedHat)
    • RE: Cisco Client Cannot Connect Outbound
      ... Cisco VPN clients to establish the VPN connection with the external VPN ... server through Microsoft Internet Security and Acceleration Server ... the Cisco VPN client is a client side connection ...
      (microsoft.public.windows.server.sbs)
    • RE: Upgraded to sbs2003 now Cisco VPN access fails on some ids
      ... VPN connection with the external Cisco 3005 concentrator using Cisco VPN ... If so, based on my knowledge, the Cisco VPN client is a client side ... Microsoft can make no representation concerning ...
      (microsoft.public.windows.server.sbs)
    • Re: Help with VPN and PIX 501
      ... >> Rather than use the Microsoft PPTP Client, why not use the Cisco VPN ...
      (microsoft.public.windows.server.sbs)