Re: Promise Ultra 133 TX2 Driver
From: Pete Nesbitt (pete_at_linux1.ca)
Date: 11/07/03
- Previous message: Mark Sargent: "RE: Dualbooting"
- In reply to: Joe K: "Promise Ultra 133 TX2 Driver"
- Next in thread: Edward Dekkers: "Promise Ultra 133 TX2 Driver"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
To: redhat-list@redhat.com Date: Thu, 6 Nov 2003 19:44:23 -0800
On November 6, 2003 07:31 pm, Joe K wrote:
> I can't get this device to cooperate. It was sold as a Maxtor Ultra 133
> ATA adapter - Maxtor cross references it with t he Promise Ultra 133 TX2
> Driver, but Promise doesn't indicate any support for this card under
> LINUX. In my Googling, I found a reference that these drivers are
> included in the 2.4 kernel (I am currently running RH 9 2.4.20-20.9).
> Kudzu detects the card but doesn't see the disk. The Promise card bios
> seems to come up first and it doesn't see any disks either. Any clues
> would be appreciated.
When you say the Promise card bios doesn't see the drives, do you mean at
post? That would be a hardware problem. Are there other drives on the main
ide bus? If they are being detected, try removing whatever is on the promise
and moving the detected drive onto the promise card and see if it is still
there, even a cd drive would do, but you should see it detected on screen at
boot, right after your main bios info is displayed. You may want to check the
jumpers as well.
--
Pete Nesbitt, RHCE
Linux+ Network+ A+
www.linux1.ca
_________________________________
"If your only tool is a hammer,
every problem looks like a nail"
_________________________________
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
- Previous message: Mark Sargent: "RE: Dualbooting"
- In reply to: Joe K: "Promise Ultra 133 TX2 Driver"
- Next in thread: Edward Dekkers: "Promise Ultra 133 TX2 Driver"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
