Re: SCSI problem - Adaptec AHA-2940UW adapter in Compac Professional Workstation AP200
From: Pete Nesbitt (pete_at_linux1.ca)
To: email@example.com Date: Wed, 3 Mar 2004 21:41:01 -0800
On March 3, 2004 09:33 am, Johnny Smith wrote:
> When installing Redhat 9.0 on this box I get these
> messages 'initially during Boot Up'
> Scsi-ID 1 HP
> SCSI Bios'not installed'
> I have an HP Scanjet 4P attached to this box.
> and SANE cannot find the scanner
> I'm not really conversant with SCSI.. and am not
> sure what I have to do next to deal with the
> SCSI Bios'not installed' problem or
> exactly what the machine is telling me?
> Can someone give some direction?
> Thanks in advance.
The Adaptec card may not have the bios turned on. IIRC after the system runs
post, at the adaptec card info press "ctl-a". That will put you into the
cards settings where you can check that the on-card bios is enabled.
-- Pete Nesbitt, rhce -- redhat-list mailing list unsubscribe mailto:firstname.lastname@example.org?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list