Re: Firewall

From: Keith Morse (kgmorse_at_mpcu.com)
Date: 03/15/04

  • Next message: crucificator_at_xnet.ro: "Possible SPAM (accuracy medium): Re: problem connecting to ip address outside firewall" 
    Date: Mon, 15 Mar 2004 09:55:55 -0800 (PST)
To: General Red Hat Linux discussion list <redhat-list@redhat.com>

    On Mon, 15 Mar 2004, Jeffrey J. Karrels wrote:

    > Hello,
    >
    > Sorry if this question has been posted previously. I could not find
    > anything on it in the archives. I wish to set up a redhat9.0 firewall. I
    > am fine on setting it up with private lan side ips. Now I'm trying to set
                                    ^^^^^^^^^^^^^^^^^^^
    I assume you mean rfc1918 addresses.

    > up global static ips on the lan side? Could someone give some examples on
    > network card settings on both the firewall and a lan computer.
    >
    > Thanks in advance.
    >

    An ip address is an ip address. Use "neat" (aka redhat-config-network) to
    manipulate the address with a GUI or directly edit
    /etc/sysconfig/network-scripts/ifcfg-eth0 and modify the entries manually.
    restart network services with a "service network restart" 

    -- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
  • Next message: crucificator_at_xnet.ro: "Possible SPAM (accuracy medium): Re: problem connecting to ip address outside firewall"

    Relevant Pages

    • Re: Windows 2K3 and Virtual Server 2005 guests NAT problem
      ... If you put the private LAN on an internal virtual ... network you have to run the router on a virtual machine (with one NIC ... in the virtual network and one linked to the physical network) If you ... use the loopback adapter you can route through the host machine. ...
      (microsoft.public.windows.server.networking)
    • Re: laptop > network security
      ... VLANs so that it was completely segmented from their private network. ... could get out to the Internet, but the switch wouldn't pass any traffic to ... Set up a separate LAN for visitors and isolate it from your private LAN. ...
      (microsoft.public.security)
    • Re: Static vs Dynamic IP addresses
      ... Maybe your right Stan, I never thought of it that way, I just assumed ... the OP was referring to the private LAN side of the network, ... | The biggest "con" for static IP addressing, as far as I know, is ...
      (microsoft.public.windowsxp.basics)
    • Dynamic IP problems
      ... network, ... have a dynamic IP address in a NAT enviorment(because of ... so I am using an update client from ... to the private LAN IP on the specific computer. ...
      (microsoft.public.windowsxp.work_remotely)
    • Re: Performance problem when accessing a mdb file on the server
      ... other possible causes include slow network card settings and/or a slow ... there are certain versions of certain network-based anti-virus ... the network gurus allowed an exception to the Access ...
      (microsoft.public.access.externaldata)
    Loading