RE: problems receiving e-mail to my server redux

From: Ed McCorduck (Ed.McCorduck_at_Cortland.edu)
Date: 07/14/04

  • Next message: kanhu rauta: "SUB:HELP FOR LOG/MESSAGE"
    Date: Wed, 14 Jul 2004 06:09:51 -0400
    To: <lists-redhat-replies@listmail.innovate.net>
    
    

    Thanks so much for your reply. At the risk of cluttering up the list
    (another newbie _faux pas_ that I hope you'll all forgive me for), let
    me repeat here what I just replied to Ed Greshko:

    I installed BIND on my Linux box and set it up to start at every
    boot-up, so I assumed this would take care of my DNS/nameserver setup.
    One of the bases for that belief is this passage from Peter Harrison's
    book _Linux Home Networking II_: "BIND is an acronym for the 'Berkeley
    Internet Name Domain' project which MAINTAINS THE DNS RELATED SOFTWARE
    SUITE THAT RUNS UNDER LINUX [emphasis mine]. The most well known program
    in BIND is 'named', the daemon THAT RESPONDS TO DNS QUERIES FROM REMOTE
    MACHINES [emphasis mine again]" (p. 59). Granted, Harrison's book is
    full of other details and configurations I must still perform regarding
    the files that named uses, but this snippet certainly makes it all sound
    simple enough for a fool like me to think I could do it all on my own.

    I'd appreciate your further thoughts on this, and thanks again for your
    reply.

    Ed McCorduck
    Department of English
    State University of New York College at Cortland
    http://mccorduck.cortland.edu
    ICQ: http://mccorduck.cortland.edu/pager
    AIM: EdMcCorduck

    > -----Original Message-----
    > From: lists-redhat-replies@listmail.innovate.net
    > [mailto:lists-redhat-replies@listmail.innovate.net]
    > Sent: Sunday, July 11, 2004 6:37 AM
    > To: Ed McCorduck
    > Subject: RE: problems receiving e-mail to my server redux
    >
    >
    > while you may now be forwarding port 53, it doesn't look like you
    > have a dns server running on your machine. since you list your
    > machine as the authoritative nameserver for your domain you have to
    > run a dns server if you want things to work.
    >
    > related, in the whois records you have:
    >
    > mccorduck.ws ........ 24.24.15.155:80
    >
    > which implies that you are trying to use port 80 for your dns server.
    > this simply won't work. [i believe that the spurious :80 gets
    > ignored, as it should, when this information gets put into the root
    > servers.]
    >
    >
    >
    > ---------- Original Message ----------
    > > From: Ed McCorduck <Ed.McCorduck@Cortland.edu>
    > > To: General Red Hat Linux discussion list <redhat-list@redhat.com>
    > > Date: Sunday, July 11, 2004 06:20:00 AM -0400
    > > Subject: RE: problems receiving e-mail to my server redux
    > >
    > >> -----Original Message-----
    > >> From: redhat-list-bounces@redhat.com
    > >> [mailto:redhat-list-bounces@redhat.com] On Behalf Of Cowles, Steve
    > >> Sent: Thursday, July 08, 2004 6:24 PM
    > >> To: 'General Red Hat Linux discussion list'
    > >> Subject: RE: problems receiving e-mail to my server redux
    > >>
    > >>
    > >> Ed McCorduck wrote:
    > >> >
    > >> > Thanks for your very detailed reply, Steve. I'll try to
    > dig through
    > >> > your mine of information as best as I am able, but
    > >> unfortunately it's
    > >> > mostly way over my head at the present state of my newbie
    > >> > knowledge.
    > >>
    > >> Ed,
    > >>
    > >> In short...
    > >>
    > >> 1) Your domain regsitration seems to be correct. i.e. The
    > recursion
    > >> from the root servers back to your name server is working.
    > >>
    > >> 2) Whats not working are queries to your name server;
    > which is listed
    > >> at 24.24.15.155. Is this the public IP address for your firewall?
    > >
    > > For my home network, yes. It's the static IP address
    > assigned to me by
    > > my ISP, to which I am connected by a cable modem. The cable goes
    > > through my router, where the firewall is.
    > >
    > >
    > >> 3) The reply I got back from the above IP address was an ICMP port
    > >> unreachable. This is usually caused by your firewall not being
    > >> properly configured for NAT'ing (port forwarding) to an internal
    > >> RFC1918 address. In your case, 192.168.1.101
    > >>
    > >> > At least I understand one of your questions, though, and
    > perhaps my
    > >> > answer can shed more light on the problem:
    > >> >
    > >> >> BTW: Is 192.168.1.101 possibly a host behind your firewall???
    > >> >
    > >> > Yes, 192.168.1.101 is the IP address that I maintain for
    > my Linux
    > >> > computer, which houses my Web and e-mail (sendmail) servers. My
    > >> > firewall, which is an integral part of my Linksys router
    > >> for my home
    > >> > network, I set up through Port Forwarding to send all port
    > >> 25, 80 and
    > >> > 110 queries to this computer.
    > >>
    > >> As I suspected. Please note that DNS queries require udp
    > and tcp port
    > >> 53 to be port forwarded. You don't mention these ports above.
    > >
    > > O.K., I hadn't set port 53 to be forwarded to 192.168.1.101, but I
    > > changed that but still any e-mail sent to me is bouncing. BTW, by
    > > saying "these ports" in your question above, did you mean
    > that there's
    > > a separate port number for udp? All I saw on my router's
    > configuration
    > > screen was that port 53 was for "DNS."
    > >
    > >
    > > Ed McCorduck
    > > Department of English
    > > 117-A Old Main
    > > 753-2093
    > > http://mccorduck.cortland.edu
    > > ICQ: http://mccorduck.cortland.edu/pager
    > > AIM: EdMcCorduck
    > >
    > >
    > > --
    > > redhat-list mailing list
    > > unsubscribe
    > mailto:redhat-list-request@redhat.com?> subject=unsubscribe
    > >
    >
    https://www.redhat.com/mailman/listinfo/redhat-list

    ---------- End Original Message ----------

    -- 
    redhat-list mailing list
    unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
    https://www.redhat.com/mailman/listinfo/redhat-list
    

  • Next message: kanhu rauta: "SUB:HELP FOR LOG/MESSAGE"

    Relevant Pages

    • Re: uCLinux on Samsung S3C4510B (ARM7TDMI) based wireless router
      ... serial port or printer port, ... linux or further. ... > router, access point and print server, all at the same time, preferably ... > and openap-ng) options as well as uCLinux. ...
      (comp.os.linux.embedded)
    • Re: Unix / Linux Program Port to OS/2 with GCC and LIBC: HowTo Support / Use of Unix Function "Symb
      ... The discussion of the MPlayer port comes up with the above subject. ... OS/2 port on Hobbes: http://hobbes.nmsu.edu/cgi-bin/h-search?key=coreutils_5.93 ... The Linux symbolic link function is introduced ...
      (comp.os.os2.multimedia)
    • Re: TOP Network Interface Port of a Sun Ultra 30
      ... What I had was a PCI card in my Linux ... this device connects to an Ethernet port. ... on the Sun that makes it not as possible to support the DEVICES I have on ... significant speed difference if I were to connect this to a network card ...
      (comp.sys.sun.hardware)
    • Re: Serial port blues
      ... digital amateur radio on Linux, because I'm curious whether or not the ... the serial port can only be controled by the kernel. ... processes without needing to hit the reset button. ...
      (Linux-Kernel)
    • RE: seeking a better understanding
      ... were to breach that port, could they do more than deface my website? ... or do I need a middle box running some form of firewall ... Other boxes are Linux. ... use on a linux machine, and do the spot trojans as the MS ones do? ...
      (Security-Basics)