Re: Server Locking up...please help! {Scanned}

From: Jean-Christophe Valiere (jyce_at_free.fr)
Date: 08/23/04

  • Next message: bruce: "set up account/group with limited access"
    Date: Mon, 23 Aug 2004 14:40:20 +0200
    To: SW <wppiphoto@wppi.com>, General Red Hat Linux discussion list <redhat-list@redhat.com>
    
    

    Selon SW <wppiphoto@wppi.com>:

    > Hello,
    >
    > My Redhat Enterprise 3 just started to freeze and I'm trying to find out
    > what is the cause. I've looked at my server logs and it appears there seems
    > to be a few problems which I don't know how to correct. Here are the few
    > items I've noticed:
    >
    > 1. The kernel complains about an unknown partition table in my 1 and only
    > IDE
    > HD:
    > Aug 21 11:15:49 server22 kernel: Partition check:
    > Aug 21 11:15:49 server22 kernel: hde: unknown partition table
    > Not sure how to fix this but I know I had a lot of diffucilties trying to
    > install this drive about a month ago. The problem was me...I'm a newbie in
    > the linux world and couldn't figure out how to add a new HD to the system.
    > ;-)
    If you got only one hdd it should be at /dev/hda. Error should come from
    /etc/fstab. What gives the mount command ??

    >
    > 2. Server complains about modprobe, not sure if this is a serious problem:
    > Aug 21 11:17:55 server22 modprobe: modprobe: Can't locate module
    > char-major-10-134
    >
    Google gives me:
    http://lists.suse.com/archive/suse-linux-e/2002-Jan/2836.html
    BTW you should simply unactivate this feature I believe like this:
    $> echo "alias char-major-10-134 off" >> /etc/modules.conf

    > 3. MTRR error about write-combining not supported:
    >
    > Aug 21 11:17:56 server22 kernel: mtrr: Serverworks LE detected.
    > Write-combining disabled.
    > Aug 21 11:17:56 server22 kernel: mtrr: your processor doesn't support
    > write-combining
    >
    Again Google:
    http://www.google.com/search?hl=en&ie=UTF-8&q=kernel:+mtrr:+Serverworks+LE+detected.&spell=1
    It seems to be an X issue ...
    > 4. My Plextor CD/DVD R/RW errors:
    >
    > Aug 21 11:18:08 server22 kernel: hda: packet command error: status=0x51 {
    > DriveReady SeekComplete Error }
    > Aug 21 11:18:08 server22 kernel: hda: packet command error: error=0x44
    > Aug 21 11:18:08 server22 kernel: ATAPI device hda:
    > Aug 21 11:18:08 server22 kernel: Error: Hardware error -- (Sense key=0x04)
    > Aug 21 11:18:08 server22 kernel: Tracking servo failure -- (asc=0x09,
    > ascq=0x01)
    > Aug 21 11:18:08 server22 kernel: The failed "Test Unit Ready" packet command
    > was:
    > Aug 21 11:18:08 server22 kernel: "00 00 00 00 00 00 00 00 00 00 00 00 "
    >
    > 5. Also, my IDE hard drive keeps giving me this error message:
    >
    > Aug 22 02:57:50 server22 kernel: hde: dma_timer_expiry: dma status == 0x21
    > Aug 22 02:58:00 server22 kernel: hde: error waiting for DMA
    >
    > The IDE drive is installed in a mixed system of IDE and SCSI HDs. I also
    > keep getting this error message anytime I try to run fdisk on the drive:
    >
    > # fdisk -l /dev/hde
    >
    > Disk /dev/hde: 40.0 GB, 40020664320 bytes
    > 255 heads, 63 sectors/track, 4865 cylinders
    > Units = cylinders of 16065 * 512 = 8225280 bytes
    >
    > Disk /dev/hde doesn't contain a valid partition table
    >
    > Can anyone please help with any of the above items?
    >
    > Thank you,
    >
    > SW
    >
    >
    >
    > -------------------------------------------------
    > WPPi.com | WPPi.Net
    > -------------------------------------------------
    > http://www.wppi.com | http://www.wppi.net
    > -------------------------------------------------
    > WPPi.com & WPPi.Net MailScanner Signature
    > This message has been scanned for viruses
    > and dangerous content by WPPi MailScanner,
    > and has been found to be clean.
    > -------------------------------------------------
    >
    >
    >
    > --
    > redhat-list mailing list
    > unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
    > https://www.redhat.com/mailman/listinfo/redhat-list
    >

    --
    "Si la politique pouvait changer notre vie,
     cela ferait longtemps qu'elle serait interdite."
      - Federation Anarchiste de France -
    -- 
    redhat-list mailing list
    unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
    https://www.redhat.com/mailman/listinfo/redhat-list
    

  • Next message: bruce: "set up account/group with limited access"

    Relevant Pages

    • Re: VFP9 installation problems after motherboard replacement
      ... Delete the FOXUSER .DBF and .FPT files before you go into the IDE. ... Do you want to overwrite with another memo file? ... No error message, ... I uninstalled and reinstalled Foxpro once more. ...
      (microsoft.public.fox.programmer.exchange)
    • Re: How do I run IPConfig /all Programmatically?
      ... > own documentation ... > Running this sample as compiled, EXE gives the following error message at ... > Running this inside IDE generates IPF at VB6.EXE at the end. ...
      (microsoft.public.vb.winapi)
    • GUI-problems with VStudio 2003
      ... I must confess that I have NOT searched the board for likewise cases. ... Within the properties-window of ANY given element the IDE behaves unsatisfying. ... Whenever I use the mouse to operate on a drop-down-dialog, VStudio crashes and an error message is sent to Redmond (they must have ... The technical details of the error message indicate that the problem is concerned with Focus. ...
      (microsoft.public.vstudio.general)
    • Re: IDE locks up on loading or new web project
      ... I just started the computer in safe mode and the IDE ... This error message means the server application is busy and cannot ... This error might also be caused by antivirus software blocking some ... these scripts might be blocked by antivirus software. ...
      (microsoft.public.vsnet.ide)
    • Re: Strange DBI problem
      ... > I think I have traced it back to a DBI subroutine that is inserting ... > the form data into a MySql table. ... The very first thing you should be looking for is the error message in ... your server logs, add the following lines to the top of your script: ...
      (comp.lang.perl.misc)