Enterprise 3 installing and devices

From: Jeff Muzerolle (jmuzerolle_at_berklee.edu)
Date: 03/25/05

  • Next message: Smith, Albert: "RE: Enterprise 3 installing and devices" 
    Date: Fri, 25 Mar 2005 14:46:22 -0500
To: redhat-list@redhat.com

    Hello,

    I am installing RH E3 on a Dell 2650. I have an Apple Fibre Channel card
    (LSI) installed and connected to an Apple Xserve RAID unit (configured
    as RAID5 volume). The server also has an embedded RAID controller which
    controls 2 internal SCSI disks (these are configured as a mirror set).

    Everything is auto-detected properly, and the RAID sets are visible in
    Disk Druid. My problem has to do with the device mappings. When I go
    into Disk Druid to make partitions during the setup, the RAID5 volume
    (the Xserve RAID) is mapped to /dev/sda and the mirror set (internal
    SCSI disks) are mapped to /dev/sdb. I want to install the OS on the
    internal mirror set, so is there a way to reverse this?

    Thanks! 

    -- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
  • Next message: Smith, Albert: "RE: Enterprise 3 installing and devices"