Re: Mii-tool discrepincy

From: inode0 (inode0_at_gmail.com)
Date: 06/28/05

  • Next message: Steve Phillips: "Re: Mii-tool discrepincy" 
    Date: Mon, 27 Jun 2005 21:04:53 -0500
To: General Red Hat Linux discussion list <redhat-list@redhat.com>

    On 6/27/05, Smith, Albert <Albert.Smith@genexservices.com> wrote:
    > Hey folks,
    >
    > I just want to make sure that I am not the only one having this
    > problem.
    >
    > net-tools-1.60-20E.7
    >
    > mii-tool is detecting the card at 100FD but ethtool is seeing the card
    > at 1gig. DMESG shows the link set to 1gig. If I have mii-tool
    > autonegotiate the card again it says that it's 100FD but dmesg states
    > 1gig and ethtool states 1gig. Does mii-tool support 1gig?

    Don't know for sure but the mii-tool manpage and help suggest that it doesn't.

    usage: mii-tool [-VvRrwl] [-A media,... | -F media] [interface ...]
           -V, --version display version information
           -v, --verbose more verbose output
           -R, --reset reset MII to poweron state
           -r, --restart restart autonegotiation
           -w, --watch monitor for link status changes
           -l, --log with -w, write events to syslog
           -A, --advertise=media,... advertise only specified media
           -F, --force=media force specified media technology
    media: 100baseT4, 100baseTx-FD, 100baseTx-HD, 10baseT-FD, 10baseT-HD,
           (to advertise both HD and FD) 100baseTx, 10baseT

    So I'm guessing mii-tool is 10/100.

    John 

    -- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
  • Next message: Steve Phillips: "Re: Mii-tool discrepincy"

    Relevant Pages

    • Re: Mii-tool discrepincy
      ... Smith, Albert wrote: ... > mii-tool is detecting the card at 100FD but ethtool is seeing the card ... For one gig nics, I've found that ethtool works, but mii-tool doesn't. ...
      (RedHat)
    • RE: Mii-tool discrepency
      ... Subject: Mii-tool discrepincy ... > mii-tool is detecting the card at 100FD but ethtool is seeing the card ... unsubscribe mailto:redhat-list-request@redhat.com?subject=unsubscribe ...
      (RedHat)
    • Unable to set media type and duplex with 3c59x.o driver and a 3c595 card
      ... to force this with the mii-tool using ... host root # ifconfig ... I haven't been able to find any way of getting this card to work. ... Switch with autonegotiation enabled. ...
      (comp.os.linux.networking)
    • Mii-tool discrepincy
      ... mii-tool is detecting the card at 100FD but ethtool is seeing the card ... autonegotiate the card again it says that it's 100FD but dmesg states ... 1gig and ethtool states 1gig. ...
      (RedHat)
    • Re: [SLE] e100 speed duplex under 9.1
      ... On Friday, September 3, 2004 04:11 pm, Cunningham, Dave wrote: ... > but I need to figure out how to force the card eventually. ... You can use one of ethtool or mii-tool; which one I think depends upon what ... eth0: negotiated 10baseT-FD, link ok ...
      (SuSE)