Re: All RAM is being used, swap not being used at all. Linux running slow.



[root@bangpcplin3 ~]# mpstat -P ALL
Linux 2.6.9-5.EL (bangpcplin3) 12/23/2005

03:35:02 AM CPU %user %nice %system %iowait %irq %soft %idle
intr/s
03:35:02 AM all 2.83 0.00 0.33 0.02 0.10 0.03 96.69
6.65
03:35:02 AM 0 1.69 0.00 0.27 0.02 0.10 0.04 97.88
0.25
03:35:02 AM 1 3.21 0.00 0.40 0.02 0.10 0.04 96.23
0.16
03:35:02 AM 2 1.88 0.00 0.25 0.02 0.10 0.03 97.73
0.24
03:35:02 AM 3 4.17 0.00 0.42 0.02 0.10 0.03 95.26
0.15
03:35:02 AM 4 1.91 0.00 0.27 0.02 0.10 0.03 97.68
0.24
03:35:02 AM 5 4.20 0.00 0.42 0.02 0.10 0.03 95.24
0.15
03:35:02 AM 6 2.04 0.00 0.26 0.02 0.10 0.03 97.55
0.24
03:35:02 AM 7 4.00 0.00 0.45 0.02 0.10 0.02 95.41
0.15
03:35:02 AM 8 1.90 0.00 0.27 0.02 0.10 0.03 97.69
0.24
03:35:02 AM 9 3.82 0.00 0.39 0.02 0.10 0.03 95.64
0.15
03:35:02 AM 10 1.83 0.00 0.25 0.02 0.10 0.03 97.77
0.24
03:35:02 AM 11 3.76 0.00 0.40 0.02 0.10 0.03 95.69
0.15
03:35:02 AM 12 1.68 0.00 0.24 0.02 0.10 0.03 97.93
0.24
03:35:02 AM 13 3.73 0.00 0.42 0.02 0.10 0.03 95.70
0.15
03:35:02 AM 14 1.82 0.00 0.25 0.02 0.10 0.03 97.78
0.24
03:35:02 AM 15 3.67 0.00 0.39 0.02 0.10 0.03 95.79
0.15
03:35:02 AM 16 1.73 0.00 0.25 0.02 0.10 0.03 97.87
0.24
03:35:02 AM 17 3.81 0.00 0.40 0.02 0.10 0.03 95.64
0.15
03:35:02 AM 18 1.90 0.00 0.24 0.02 0.10 0.03 97.71
0.24
03:35:02 AM 19 4.23 0.00 0.42 0.02 0.10 0.03 95.20
0.15
03:35:02 AM 20 1.82 0.00 0.24 0.02 0.10 0.03 97.79
0.24
03:35:02 AM 21 3.75 0.00 0.44 0.02 0.10 0.03 95.67
0.15
03:35:02 AM 22 2.10 0.00 0.26 0.02 0.10 0.03 97.50
0.24
03:35:02 AM 23 3.88 0.00 0.47 0.02 0.10 0.03 95.50
0.15
03:35:02 AM 24 1.64 0.00 0.23 0.02 0.10 0.03 97.98
0.24
03:35:02 AM 25 3.59 0.00 0.40 0.02 0.10 0.03 95.87
0.15
03:35:02 AM 26 1.87 0.00 0.26 0.02 0.10 0.03 97.72
0.24
03:35:02 AM 27 3.94 0.00 0.42 0.02 0.10 0.03 95.49
0.15
03:35:02 AM 28 1.84 0.00 0.25 0.02 0.10 0.03 97.76
0.24
03:35:02 AM 29 3.85 0.00 0.38 0.02 0.10 0.03 95.62
0.15
03:35:02 AM 30 1.68 0.00 0.26 0.02 0.10 0.03 97.92
0.24
03:35:02 AM 31 3.74 0.00 0.42 0.02 0.10 0.03 95.69
0.15
03:35:02 AM 32 1.65 0.00 0.23 0.02 0.10 0.03 97.98
0.24
03:35:02 AM 33 3.87 0.00 0.45 0.02 0.10 0.03 95.53
0.15

Regards,
-GnanaShekar-


On 12/22/05, Tolga Evren <tolgae@xxxxxxxxxxx> wrote:
>
> What does
>
> mpstat -P ALL
>
> say?
>
> Tolga Evren
>
> -----Original Message-----
> From: redhat-list-bounces@xxxxxxxxxx
> [mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of unix syzadmin
> Sent: Thursday, December 22, 2005 4:29 PM
> To: General Red Hat Linux discussion list
> Subject: Re: All RAM is being used,swap not being used at all. Linux
> running slow.
>
> Hey,
>
> The system has 17 Virtual CPU's, each containing 2 threads. So top
> would
> should a total of 34 CPU's.
> This is IBM p5-550 server that has 4CPUs and 8GB RAM. We are running
> RHEL
> AS4 on one of the LPARs (Logical parition) which is allocated 1.7 CPU
> and
> 3.5GB RAM. We are running AIX 5.3 on the other LPAR.
>
> Thanks & Regards,
> -GnanaShekar-
>
>
>
> On 12/22/05, Tom Callahan <callahant@xxxxxxxxxx> wrote:
> >
> > I'd first check to make sure that the Weblogic VM is not set to use
> more
> > memory than the system has....You'd be amazed how often this occurs.
> >
> > Second, how many processors are in this system? With weblogic sitting
> at
> > 99% cpu usage in top, but the system close to idle, It appears that
> > weblogic is not actively using multiple processors. This can cause it
> to
> > perform quite slowly. It pegs one cpu, but the rest remain idle. Run
> > Oracle, and you will see this often.....
> >
> > Running weblogic as a non-root user, I would also check your shell
> > limits, weblogic may be trying to hold open more files than the user
> is
> > allowed. Check /etc/security/limits.conf
> >
> > Thanks,
> >
> > Tom Callahan
> > TESSCO Technologies
> > (443)-506-6216
> > callahant@xxxxxxxxxx
> >
> > A real engineer only resorts to documentation when the keyboard dents
> on
> > the forehead get too noticeable.
> >
> >
> >
> > Tolga Evren wrote:
> >
> > >Hi ,
> > >
> > > PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+
> > >COMMAND
> > >23921 kapil 25 0 811m 510m 6260 R 99.9 14.5
> > >9:50.62 java
> > >
> > >Here , the process 23921 consumes all the cpu ( but in summary , cpu
> is
> > >shown idle , this is strange)
> > >
> > >Why does this process consume all the cpu? What does it do? Can you
> > >check:
> > >
> > >Strace -p 23291 ?
> > >
> > >What happens when you stop this ? Does the system work faster?
> > >
> > >Kind Regards,
> > >Tolga Evren
> > >
> > >-----Original Message-----
> > >From: redhat-list-bounces@xxxxxxxxxx
> > >[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of unix syzadmin
> > >Sent: Thursday, December 22, 2005 1:51 PM
> > >To: General Red Hat Linux discussion list
> > >Subject: Re: All RAM is being used,swap not being used at all. Linux
> > >running slow.
> > >
> > >Hi,
> > >
> > >top - 11:35:37 up 23:43, 10 users, load average: 2.45, 2.56, 2.63
> > >Tasks: 249 total, 2 running, 247 sleeping, 0 stopped, 0 zombie
> > >Cpu(s): 5.9% us, 0.1% sy, 0.0% ni, 93.9% id, 0.0% wa, 0.1% hi,
> > >0.1% si
> > >Mem: 3595048k total, 3508176k used, 86872k free, 10508k
> buffers
> > >Swap: 3148700k total, 144k used, 3148556k free, 1006012k
> cached
> > > PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
> > >23921 kapil 25 0 774m 358m 6248 R 99.1 10.2 6:34.45 java
> > >24146 root 16 0 2428 1108 792 R 5.0 0.0 0:04.65 top
> > > 1826 root 16 0 9588 3492 2388 S 0.3 0.1 0:03.90 sendmail
> > > 1 root 16 0 1860 584 496 S 0.0 0.0 0:03.91 init
> > > 2 root RT 0 0 0 0 S 0.0 0.0 0:01.64
> migration/0
> > > 3 root 34 19 0 0 0 S 0.0 0.0 0:00.06
> ksoftirqd/0
> > > 4 root RT 0 0 0 0 S 0.0 0.0 0:00.52
> migration/1
> > > 5 root 34 19 0 0 0 S 0.0 0.0 0:00.04
> ksoftirqd/1
> > > 6 root RT 0 0 0 0 S 0.0 0.0 0:01.85
> migration/2
> > > 7 root 34 19 0 0 0 S 0.0 0.0 0:00.01
> ksoftirqd/2
> > > 8 root RT 0 0 0 0 S 0.0 0.0 0:00.44
> migration/3
> > > 9 root 34 19 0 0 0 S 0.0 0.0 0:00.02
> ksoftirqd/3
> > > 10 root RT 0 0 0 0 S 0.0 0.0 0:02.11
> migration/4
> > > 11 root 34 19 0 0 0 S 0.0 0.0 0:00.04
> ksoftirqd/4
> > > 12 root RT 0 0 0 0 S 0.0 0.0 0:00.71
> migration/5
> > > 13 root 34 19 0 0 0 S 0.0 0.0 0:00.00
> ksoftirqd/5
> > > 14 root RT 0 0 0 0 S 0.0 0.0 0:02.16
> migration/6
> > > 15 root 34 19 0 0 0 S 0.0 0.0 0:00.03
> ksoftirqd/6
> > > 16 root RT 0 0 0 0 S 0.0 0.0 0:00.57
> migration/7
> > > 17 root 34 19 0 0 0 S 0.0 0.0 0:00.04
> ksoftirqd/7
> > > 18 root RT 0 0 0 0 S 0.0 0.0 0:02.27
> migration/8
> > > 19 root 34 19 0 0 0 S 0.0 0.0 0:00.00
> ksoftirqd/8
> >
> >======================================================================
> > >top - 11:37:16 up 23:45, 10 users, load average: 2.36, 2.50, 2.60
> > >Tasks: 249 total, 4 running, 245 sleeping, 0 stopped, 0 zombie
> > >Cpu(s): 5.3% us, 0.8% sy, 0.0% ni, 93.7% id, 0.0% wa, 0.2% hi,
> > >0.0% si
> > >Mem: 3595048k total, 3503328k used, 91720k free, 10540k
> buffers
> > >Swap: 3148700k total, 144k used, 3148556k free, 1009592k
> cached
> > > PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
> > >23921 kapil 25 0 786m 370m 6260 R 99.9 10.5 8:07.53 java
> > >24146 root 16 0 2428 1108 792 R 5.3 0.0 0:10.07 top
> > >24248 subreddy 18 0 0 0 0 R 3.8 0.0 0:00.12 java
> > > 158 root 15 0 0 0 0 S 0.6 0.0 0:26.06 pdflush
> > > 1 root 16 0 1860 584 496 S 0.0 0.0 0:03.91 init
> > > 2 root RT 0 0 0 0 S 0.0 0.0 0:01.65
> migration/0
> > > 3 root 34 19 0 0 0 S 0.0 0.0 0:00.06
> ksoftirqd/0
> > > 4 root RT 0 0 0 0 S 0.0 0.0 0:00.52
> migration/1
> > > 5 root 34 19 0 0 0 S 0.0 0.0 0:00.04
> ksoftirqd/1
> > > 6 root RT 0 0 0 0 S 0.0 0.0 0:01.85
> migration/2
> > > 7 root 34 19 0 0 0 S 0.0 0.0 0:00.01
> ksoftirqd/2
> > > 8 root RT 0 0 0 0 S 0.0 0.0 0:00.44
> migration/3
> > > 9 root 34 19 0 0 0 S 0.0 0.0 0:00.02
> ksoftirqd/3
> > > 10 root RT 0 0 0 0 S 0.0 0.0 0:02.11
> migration/4
> > > 11 root 34 19 0 0 0 S 0.0 0.0 0:00.04
> ksoftirqd/4
> > > 12 root RT 0 0 0 0 S 0.0 0.0 0:00.71
> migration/5
> > > 13 root 34 19 0 0 0 S 0.0 0.0 0:00.00
> ksoftirqd/5
> > > 14 root RT 0 0 0 0 S 0.0 0.0 0:02.18
> migration/6
> > > 15 root 34 19 0 0 0 S 0.0 0.0 0:00.03 ksofti
> >
> >======================================================================
> > >
> > >top - 11:39:00 up 23:46, 10 users, load average: 2.50, 2.48, 2.58
> > >Tasks: 248 total, 3 running, 245 sleeping, 0 stopped, 0 zombie
> > >Cpu0 : 0.0% us, 0.0% sy, 0.0% ni, 99.7% id, 0.0% wa, 0.3% hi,
> > >0.0% si
> > >Cpu1 : 0.0% us, 0.6% sy, 0.0% ni, 98.8% id, 0.0% wa, 0.6% hi,
> > >0.0% si
> > >Cpu2 : 0.0% us, 0.0% sy, 0.0% ni, 100.0% id, 0.0% wa, 0.0% hi,
> > >0.0%si
> > >Cpu3 : 0.0% us, 0.0% sy, 0.0% ni, 100.0% id, 0.0% wa, 0.0% hi,
> > >0.0%si
> > >Cpu4 : 0.3% us, 0.6% sy, 0.0% ni, 99.1% id, 0.0% wa, 0.0% hi,
> > >0.0% si
> > >Cpu5 : 0.0% us, 0.0% sy, 0.0% ni, 100.0% id, 0.0% wa, 0.0% hi,
> > >0.0%si
> > >Cpu6 : 0.0% us, 0.0% sy, 0.0% ni, 100.0% id, 0.0% wa, 0.0% hi,
> > >0.0%si
> > >Cpu7 : 0.0% us, 0.0% sy, 0.0% ni, 99.7% id, 0.0% wa, 0.3% hi,
> > >0.0% si
> > >Cpu8 : 0.0% us, 0.0% sy, 0.0% ni, 100.0% id, 0.0% wa, 0.0% hi,
> > >0.0%si
> > >Cpu9 : 0.0% us, 0.0% sy, 0.0% ni, 99.1% id, 0.0% wa, 0.9% hi,
> > >0.0% si
> > >Cpu10 : 0.0% us, 0.0% sy, 0.0% ni, 99.7% id, 0.0% wa, 0.3% hi,
> > >0.0% si
> > >Cpu11 : 94.1% us, 5.6% sy, 0.0% ni, 0.0% id, 0.0% wa, 0.3% hi,
> > >0.0% si
> > >Cpu12 : 0.0% us, 0.0% sy, 0.0% ni, 99.4% id, 0.0% wa, 0.6% hi,
> > >0.0% si
> > >Cpu13 : 0.0% us, 0.0% sy, 0.0% ni, 100.0% id, 0.0% wa, 0.0% hi,
> > >0.0%si
> > >Cpu14 : 0.0% us, 0.0% sy, 0.0% ni, 100.0% id, 0.0% wa, 0.0% hi,
> > >0.0%si
> > >Cpu15 : 0.0% us, 0.0% sy, 0.0% ni, 99.4% id, 0.0% wa, 0.6% hi,
> > >0.0% si
> > >Cpu16 : 0.0% us, 0.0% sy, 0.0% ni, 99.7% id, 0.0% wa, 0.3% hi,
> > >0.0% si
> > >Cpu17 : 0.0% us, 0.0% sy, 0.0% ni, 99.7% id, 0.0% wa, 0.3% hi,
> > >0.0% si
> > >Cpu18 : 3.4% us, 0.9% sy, 0.0% ni, 95.6% id, 0.0% wa, 0.0% hi,
> > >0.0% si
> > >Cpu19 : 0.0% us, 0.0% sy, 0.0% ni, 99.4% id, 0.0% wa, 0.3% hi,
> > >0.3% si
> > >Cpu20 : 0.0% us, 0.0% sy, 0.0% ni, 100.0% id, 0.0% wa, 0.0% hi,
> > >0.0%si
> > >Cpu21 : 95.3% us, 4.7% sy, 0.0% ni, 0.0% id, 0.0% wa, 0.0% hi,
> > >0.0% si
> > >Cpu22 : 0.0% us, 0.0% sy, 0.0% ni, 99.7% id, 0.0% wa, 0.3% hi,
> > >0.0% si
> > >Cpu23 : 0.0% us, 0.0% sy, 0.0% ni, 100.0% id, 0.0% wa, 0.0% hi,
> > >0.0%si
> > >Cpu24 : 0.3% us, 0.9% sy, 0.0% ni, 98.8% id, 0.0% wa, 0.0% hi,
> > >0.0% si
> > >Cpu25 : 0.0% us, 0.0% sy, 0.0% ni, 99.7% id, 0.0% wa, 0.0% hi,
> > >0.3% si
> > >Cpu26 : 0.0% us, 0.0% sy, 0.0% ni, 99.7% id, 0.0% wa, 0.3% hi,
> > >0.0% si
> > >Cpu27 : 0.0% us, 0.0% sy, 0.0% ni, 100.0% id, 0.0% wa, 0.0% hi,
> > >0.0%si
> > >Cpu28 : 0.0% us, 0.0% sy, 0.0% ni, 99.1% id, 0.0% wa, 0.3% hi,
> > >0.6% si
> > >Cpu29 : 0.0% us, 0.6% sy, 0.0% ni, 99.4% id, 0.0% wa, 0.0% hi,
> > >0.0% si
> > >Cpu30 : 0.0% us, 0.0% sy, 0.0% ni, 99.4% id, 0.0% wa, 0.3% hi,
> > >0.3% si
> > >Cpu31 : 0.0% us, 0.0% sy, 0.0% ni, 100.0% id, 0.0% wa, 0.0% hi,
> > >0.0%si
> > >Cpu32 : 0.0% us, 0.0% sy, 0.0% ni, 99.7% id, 0.0% wa, 0.0% hi,
> > >0.3% si
> > >Cpu33 : 0.0% us, 0.0% sy, 0.0% ni, 100.0% id, 0.0% wa, 0.0% hi,
> > >0.0%si
> > >Mem: 3595048k total, 3589936k used, 5112k free, 10704k
> buffers
> > >Swap: 3148700k total, 144k used, 3148556k free, 955764k
> cached
> > > PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
> > >23921 kapil 25 0 811m 510m 6260 R 99.9 14.5 9:50.62 java
> > >24146 root 16 0 2428 1108 792 R 6.2 0.0 0:13.87 top
> > > 159 root 15 0 0 0 0 S 0.6 0.0 0:44.49 kswapd0
> > > 158 root 15 0 0 0 0 S 0.3 0.0 0:26.18 pdflush
> > >
> > >The users over here install weblogic. They update a property file
> with
> > >the
> > >details of weblogic. They then start an ant script which will run
> the
> > >weblogic and runs test on weblogic.
> > >
> > >Thanks & Regards,
> > >-GnanaShekar-
> > >
> > >
> > >
> > >On 12/22/05, Tolga Evren <tolgae@xxxxxxxxxxx> wrote:
> > >
> > >
> > >>Hi ,
> > >>
> > >>Your server is idle. Can you explain the problem further? Is there
> any
> > >>program running?( Database , mail server etc?) What dou you see in
> top
> > >>
> > >>
> > >?
> > >
> > >
> > >>
> > >>
> > >>Kind Regards,
> > >>Tolga Evren
> > >>
> > >>-----Original Message-----
> > >>From: redhat-list-bounces@xxxxxxxxxx
> > >>[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of unix syzadmin
> > >>Sent: Thursday, December 22, 2005 11:49 AM
> > >>To: General Red Hat Linux discussion list
> > >>Subject: Re: All RAM is being used,swap not being used at all. Linux
> > >>running slow.
> > >>
> > >>Hi,
> > >>
> > >>[root@bangpcplin3 network-scripts]# vmstat 1 10
> > >>procs -----------memory---------- ---swap-- -----io---- --system--
> > >>----cpu----
> > >>r b swpd free buff cache si so bi bo in cs us
> > >>
> > >>
> > >sy
> > >
> > >
> > >>id
> > >>wa
> > >>3 0 144 237088 16676 1997272 0 0 1 1 0 4
> 2
> > >>0
> > >>97 0
> > >>2 0 144 232928 16676 1997272 0 0 80 0 26 167
> 5
> > >>1
> > >>94 0
> > >>1 1 144 231776 16676 1997272 0 0 128 168 48 155
> 4
> > >>2
> > >>93 1
> > >>1 1 144 230544 16676 1997272 0 0 104 0 27 166
> 5
> > >>1
> > >>94 0
> > >>2 0 144 228512 16676 1997272 0 0 72 0 23 169
> 5
> > >>1
> > >>94 0
> > >>2 0 144 224976 16676 1997272 0 0 88 0 26 244
> 5
> > >>1
> > >>94 0
> > >>2 0 144 221584 16676 1997272 0 0 56 0 16 137
> 5
> > >>1
> > >>94 0
> > >>2 0 144 219536 16676 1997272 0 0 40 0 16 145
> 5
> > >>1
> > >>94 0
> > >>2 0 144 217040 16676 1997272 0 0 96 0 26 149
> 5
> > >>1
> > >>94 0
> > >>1 1 144 214544 16676 1997788 0 0 124 0 34 182
> 5
> > >>1
> > >>94 1
> > >>[root@bangpcplin3 network-scripts]#
> > >>
> > >>
> > >>[root@bangpcplin3 network-scripts]# sar -B 1 10
> > >>Linux 2.6.9-5.EL (bangpcplin3) 12/22/2005
> > >>
> > >>09:45:53 AM pgpgin/s pgpgout/s fault/s majflt/s
> > >>09:45:54 AM 0.00 0.00 725.25 0.00
> > >>09:45:55 AM 0.00 0.00 208.91 0.00
> > >>
> > >>09:45:55 AM pgpgin/s pgpgout/s fault/s majflt/s
> > >>09:45:56 AM 20.00 4.00 518.00 0.00
> > >>
> > >>09:45:56 AM pgpgin/s pgpgout/s fault/s majflt/s
> > >>09:45:57 AM 16.00 0.00 178.00 0.00
> > >>
> > >>09:45:57 AM pgpgin/s pgpgout/s fault/s majflt/s
> > >>09:45:58 AM 15.84 0.00 193.07 0.00
> > >>
> > >>09:45:58 AM pgpgin/s pgpgout/s fault/s majflt/s
> > >>09:45:59 AM 0.00 0.00 228.71 0.00
> > >>
> > >>09:45:59 AM pgpgin/s pgpgout/s fault/s majflt/s
> > >>09:46:00 AM 4.00 0.00 436.00 0.00
> > >>09:46:01 AM 8.00 0.00 523.00 0.00
> > >>
> > >>09:46:01 AM pgpgin/s pgpgout/s fault/s majflt/s
> > >>09:46:02 AM 83.17 0.00 447.52 0.00
> > >>
> > >>09:46:02 AM pgpgin/s pgpgout/s fault/s majflt/s
> > >>09:46:03 AM 11.88 0.00 433.66 0.00
> > >>Average: 15.94 0.40 388.45 0.00
> > >>
> > >>
> > >>[root@bangpcplin3 network-scripts]# sar -W 1 10
> > >>Linux 2.6.9-5.EL (bangpcplin3) 12/22/2005
> > >>
> > >>09:46:26 AM pswpin/s pswpout/s
> > >>09:46:27 AM 0.00 0.00
> > >>09:46:28 AM 0.00 0.00
> > >>
> > >>09:46:28 AM pswpin/s pswpout/s
> > >>09:46:29 AM 0.00 0.00
> > >>
> > >>09:46:29 AM pswpin/s pswpout/s
> > >>09:46:30 AM 0.00 0.00
> > >>
> > >>09:46:30 AM pswpin/s pswpout/s
> > >>09:46:31 AM 0.00 0.00
> > >>
> > >>09:46:31 AM pswpin/s pswpout/s
> > >>09:46:32 AM 0.00 0.00
> > >>
> > >>09:46:32 AM pswpin/s pswpout/s
> > >>09:46:33 AM 0.00 0.00
> > >>09:46:34 AM 0.00 0.00
> > >>
> > >>09:46:34 AM pswpin/s pswpout/s
> > >>09:46:35 AM 0.00 0.00
> > >>
> > >>09:46:35 AM pswpin/s pswpout/s
> > >>09:46:36 AM 0.00 0.00
> > >>Average: 0.00 0.00
> > >>
> > >>
> > >>
> > >>[root@bangpcplin3 network-scripts]# iostat -x 1
> > >>Linux 2.6.9-5.EL (bangpcplin3) 12/22/2005
> > >>
> > >>avg-cpu: %user %nice %sys %iowait %idle
> > >> 2.46 0.00 0.36 0.02 97.15
> > >>
> > >>Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s
> wkB/s
> > >>avgrq-sz avgqu-sz await svctm %util
> > >>sda 0.04 0.97 1.27 1.10 42.28 94.26 21.14
> 47.13
> > >>57.75 0.10 41.43 5.81 1.37
> > >>sdb 0.06 0.06 0.14 0.22 5.44 2.39 2.72
> 1.20
> > >>21.47 0.01 28.94 7.62 0.28
> > >>
> > >>avg-cpu: %user %nice %sys %iowait %idle
> > >> 5.51 0.00 0.52 0.23 93.74
> > >>
> > >>Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s
> wkB/s
> > >>avgrq-sz avgqu-sz await svctm %util
> > >>sda 0.00 0.00 7.92 0.00 63.37 0.00 31.68
> 0.00
> > >>8.00 0.10 12.12 12.12 9.60
> > >>sdb 0.00 0.00 0.99 0.00 0.00 0.00 0.00
> 0.00
> > >>0.00 0.02 39.00 20.00 1.98
> > >>
> > >>avg-cpu: %user %nice %sys %iowait %idle
> > >> 5.59 0.00 0.44 0.21 93.76
> > >>
> > >>Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s
> wkB/s
> > >>avgrq-sz avgqu-sz await svctm %util
> > >>sda 0.00 0.00 5.00 10.00 40.00 112.00 20.00
> 56.00
> > >>10.13 0.31 20.93 6.87 10.30
> > >>sdb 0.00 0.00 0.00 0.00 0.00 0.00 0.00
> 0.00
> > >>0.00 0.00 0.00 0.00 0.00
> > >>[root@bangpcplin3 network-scripts]# cat /proc/meminfo
> > >>MemTotal: 3595048 kB
> > >>MemFree: 128072 kB
> > >>Buffers: 16740 kB
> > >>Cached: 2017848 kB
> > >>SwapCached: 0 kB
> > >>Active: 1340824 kB
> > >>Inactive: 1906264 kB
> > >>HighTotal: 0 kB
> > >>HighFree: 0 kB
> > >>LowTotal: 3595048 kB
> > >>LowFree: 128072 kB
> > >>SwapTotal: 3148700 kB
> > >>SwapFree: 3148556 kB
> > >>Dirty: 6504 kB
> > >>Writeback: 0 kB
> > >>Mapped: 1227656 kB
> > >>Slab: 198172 kB
> > >>Committed_AS: 5080108 kB
> > >>PageTables: 5248 kB
> > >>VmallocTotal: 2147483647 kB
> > >>VmallocUsed: 3308 kB
> > >>VmallocChunk: 2147479631 kB
> > >>HugePages_Total: 0
> > >>HugePages_Free: 0
> > >>Hugepagesize: 16384 kB
> > >>
> > >>
> > >>[root@bangpcplin3 network-scripts]# sar -r 1 10
> > >>Linux 2.6.9-5.EL (bangpcplin3) 12/22/2005
> > >>
> > >>09:48:07 AM kbmemfree kbmemused %memused kbbuffers kbcached
> > >>
> > >>
> > >kbswpfree
> > >
> > >
> > >>kbswpused %swpused kbswpcad
> > >>09:48:08 AM 116336 3478712 96.76 16740 2017848
> > >>3148556 144 0.00 0
> > >>09:48:09 AM 114736 3480312 96.81 16740 2017848
> > >>3148556 144 0.00 0
> > >>
> > >>09:48:09 AM kbmemfree kbmemused %memused kbbuffers kbcached
> > >>
> > >>
> > >kbswpfree
> > >
> > >
> > >>kbswpused %swpused kbswpcad
> > >>09:48:10 AM 113584 3481464 96.84 16740 2017848
> > >>3148556 144 0.00 0
> > >>
> > >>09:48:10 AM kbmemfree kbmemused %memused kbbuffers kbcached
> > >>
> > >>
> > >kbswpfree
> > >
> > >
> > >>kbswpused %swpused kbswpcad
> > >>09:48:11 AM 113264 3481784 96.85 16740 2017848
> > >>3148556 144 0.00 0
> > >>
> > >>09:48:11 AM kbmemfree kbmemused %memused kbbuffers kbcached
> > >>
> > >>
> > >kbswpfree
> > >
> > >
> > >>kbswpused %swpused kbswpcad
> > >>09:48:12 AM 113024 3482024 96.86 16740 2017848
> > >>3148556 144 0.00 0
> > >>
> > >>09:48:12 AM kbmemfree kbmemused %memused kbbuffers kbcached
> > >>
> > >>
> > >kbswpfree
> > >
> > >
> > >>kbswpused %swpused kbswpcad
> > >>09:48:13 AM 111872 3483176 96.89 16740 2017848
> > >>3148556 144 0.00 0
> > >>
> > >>09:48:13 AM kbmemfree kbmemused %memused kbbuffers kbcached
> > >>
> > >>
> > >kbswpfree
> > >
> > >
> > >>kbswpused %swpused kbswpcad
> > >>09:48:14 AM 111552 3483496 96.90 16740 2017848
> > >>3148556 144 0.00 0
> > >>09:48:15 AM 110176 3484872 96.94 16740 2018364
> > >>3148556 144 0.00 0
> > >>
> > >>09:48:15 AM kbmemfree kbmemused %memused kbbuffers kbcached
> > >>
> > >>
> > >kbswpfree
> > >
> > >
> > >>kbswpused %swpused kbswpcad
> > >>09:48:16 AM 102176 3492872 97.16 16740 2018364
> > >>3148556 144 0.00 0
> > >>
> > >>09:48:16 AM kbmemfree kbmemused %memused kbbuffers kbcached
> > >>
> > >>
> > >kbswpfree
> > >
> > >
> > >>kbswpused %swpused kbswpcad
> > >>09:48:17 AM 100832 3494216 97.20 16740 2018364
> > >>3148556 144 0.00 0
> > >>Average: 110755 3484293 96.92 16740 2018003
> > >>3148556 144 0.00 0
> > >>
> > >>
> > >>
> > >>[root@bangpcplin3 network-scripts]# sar 1 10
> > >>Linux 2.6.9-5.EL (bangpcplin3) 12/22/2005
> > >>
> > >>09:48:36 AM CPU %user %nice %system %iowait
> > >>
> > >>
> > >%idle
> > >
> > >
> > >>09:48:37 AM all 4.77 0.00 1.23 0.20
> > >>
> > >>
> > >93.79
> > >
> > >
> > >>09:48:38 AM all 4.89 0.00 1.11 0.15
> > >>
> > >>
> > >93.85
> > >
> > >
> > >>09:48:38 AM CPU %user %nice %system %iowait
> > >>
> > >>
> > >%idle
> > >
> > >
> > >>09:48:39 AM all 5.12 0.00 0.99 0.00
> > >>
> > >>
> > >93.89
> > >
> > >
> > >>09:48:39 AM CPU %user %nice %system %iowait
> > >>
> > >>
> > >%idle
> > >
> > >
> > >>09:48:40 AM all 7.83 0.00 0.96 0.00
> > >>
> > >>
> > >91.21
> > >
> > >
> > >>09:48:40 AM CPU %user %nice %system %iowait
> > >>
> > >>
> > >%idle
> > >
> > >
> > >>09:48:41 AM all 4.57 0.00 1.52 0.09
> > >>
> > >>
> > >93.81
> > >
> > >
> > >>09:48:41 AM CPU %user %nice %system %iowait
> > >>
> > >>
> > >%idle
> > >
> > >
> > >>09:48:42 AM all 8.34 0.00 1.20 0.06
> > >>
> > >>
> > >90.40
> > >
> > >
> > >>09:48:42 AM CPU %user %nice %system %iowait
> > >>
> > >>
> > >%idle
> > >
> > >
> > >>09:48:43 AM all 4.67 0.00 1.44 0.44
> > >>
> > >>
> > >93.45
> > >
> > >
> > >>09:48:44 AM all 4.02 0.00 1.85 0.35
> > >>
> > >>
> > >93.78
> > >
> > >
> > >>09:48:44 AM CPU %user %nice %system %iowait
> > >>
> > >>
> > >%idle
> > >
> > >
> > >>09:48:45 AM all 4.91 0.00 1.14 0.20
> > >>
> > >>
> > >93.75
> > >
> > >
> > >>09:48:45 AM CPU %user %nice %system %iowait
> > >>
> > >>
> > >%idle
> > >
> > >
> > >>09:48:46 AM all 3.81 0.00 2.46 0.44
> > >>
> > >>
> > >93.29
> > >
> > >
> > >>Average: all 5.29 0.00 1.39 0.19
> > >>
> > >>
> > >93.12
> > >
> > >
> > >>Thanks & Regards,
> > >>-GnanaShekar-
> > >>
> > >>On 12/22/05, Tolga Evren <tolgae@xxxxxxxxxxx> wrote:
> > >>
> > >>
> > >>>Can you send :
> > >>>
> > >>>Vmstat 1 10
> > >>>
> > >>>sar -B 1 10
> > >>>
> > >>>sar -W 1 10
> > >>>
> > >>>iostat -x 1
> > >>>
> > >>>cat /proc/meminfo
> > >>>
> > >>>sar -r 1 10
> > >>>
> > >>>sar 1 10
> > >>>
> > >>>?
> > >>>
> > >>>Kind Regards,
> > >>>Tolga Evren
> > >>>
> > >>>
> > >>>
> > >>>-----Original Message-----
> > >>>From: redhat-list-bounces@xxxxxxxxxx
> > >>>[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of unix syzadmin
> > >>>Sent: Thursday, December 22, 2005 11:33 AM
> > >>>To: redhat-list@xxxxxxxxxx
> > >>>Subject: All RAM is being used,swap not being used at all. Linux
> > >>>
> > >>>
> > >>running
> > >>
> > >>
> > >>>slow.
> > >>>
> > >>>Hi,
> > >>>
> > >>>All RAM is being used, swap not being used at all. Linux running
> > >>>
> > >>>
> > >>slow,
> > >>
> > >>
> > >>>Please suggest.
> > >>>
> > >>># free -m
> > >>> total used free shared buffers
> > >>>cached
> > >>>Mem: 3510 3506 4 0 15
> > >>>2511
> > >>>-/+ buffers/cache: 979 2531
> > >>>Swap: 3074 0 3074
> > >>>
> > >>>Thanks & Regards,
> > >>>-GnanaShekar-
> > >>>--
> > >>>redhat-list mailing list
> > >>>unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=subscribe
> > >>>https://www.redhat.com/mailman/listinfo/redhat-list
> > >>>
> > >>>--
> > >>>redhat-list mailing list
> > >>>unsubscribe
> > >>>
> > >>>
> > >mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > >
> > >
> > >>>https://www.redhat.com/mailman/listinfo/redhat-list
> > >>>
> > >>>
> > >>>
> > >>--
> > >>redhat-list mailing list
> > >>unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=subscribe
> > >>https://www.redhat.com/mailman/listinfo/redhat-list
> > >>
> > >>--
> > >>redhat-list mailing list
> > >>unsubscribe
> mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > >>https://www.redhat.com/mailman/listinfo/redhat-list
> > >>
> > >>
> > >>
> >
> > --
> > redhat-list mailing list
> > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > https://www.redhat.com/mailman/listinfo/redhat-list
> >
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=subscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list



Relevant Pages

  • 100 Per Cent CPU utilization
    ... >information (CNTL ALT DEL), it shows the CPU running at ... >running slow. ... I tried deleting programs, processes, etc ...
    (microsoft.public.windowsxp.perform_maintain)
  • XP Computer is now running slower than I ever dreamed it could. Help!
    ... It began running slow several weeks after I moved it to a desk where my wife uses it. ... If I start CCleaner, and click "analyze", I'll see the files go past me on the screen so slowly that I can go make coffee, and drink some of it before the analyze finishes. ... I've used Malwarebytes, Super Antispyware, and Norton 2010 on it looking for malware, nothing ever is found. ... I can watch the cpu use during the slow CCleaner analyze and the cpu use never gets at all high. ...
    (microsoft.public.windowsxp.general)
  • 100 Per Cent CPU utilization
    ... it shows the CPU running at ... >running slow. ... I tried deleting programs, processes, etc ... >I would say the Low Level format did you in. ...
    (microsoft.public.windowsxp.perform_maintain)
  • Re: registry errors
    ... For running slow there are many causes: ... Click tools tab. ... Click "Defragment now". ... You can search which process full use you cpu, ...
    (microsoft.public.windowsxp.help_and_support)