RE: system logging is not



Any idea why top couldn't find libncurses.so.4? I imagine that should
be stored under /usr/lib - that's where it is on my RHEL3ES systems.

Why do you note that the system "can't create /var/log/messages"? Your
earlier post shows /var/log/messages in the output of ls.

Do you get any errors when doing either of the following?
touch /var/log/messages
echo foo >>/var/log/messages

After echo'ing foo into /var/log/messages, is "foo" in the file?

Looks like boot.log isn't going to be useful (since it's zero bytes),
but perhaps the output of dmesg might show something helpful?

If you suspect a cracker, you might try spanning the port traffic on
your switch over to another system and using ethereal to look at it.
This is definitely not a guaranteed means of spotting an intrusion, of
course. If you do have an intruder, he's not a very tidy one - skilled
intruders don't break the system. :-)


-----Original Message-----
From: redhat-list-bounces@xxxxxxxxxx
[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Marty Landman
Sent: Wednesday, February 15, 2006 7:28 AM
To: General Red Hat Linux discussion list
Subject: RE: system logging is not

At 09:50 AM 2/14/2006, McDougall, Marshall (FSH) wrote:
The fact that most of those files are empty(hacker like activity) and
there are no .1, .2 etc does not look good. Did you do something at
18:04?

No, not that I can think of.

Run a netstat and see what/who you are listening for or connected
to.

$ netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
216.238.192.133 0.0.0.0 255.255.255.255 UH 0 0 0
ppp0
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0
eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0
eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0
lo
0.0.0.0 216.238.192.133 0.0.0.0 UG 0 0 0
ppp0
$

Look normal, doesn't it?

Wtmp is time stamped 1.5 hrs later. Run last, it might tell you who
was there or what id was compromised.

]$ sudo last
marty pts/0 nosoup4u Tue Feb 14 15:42 still logged
in
marty pts/0 nosoup4u Mon Feb 13 20:41 - 22:05 (01:24)
root pts/0 :0.0 Mon Feb 13 18:20 - 20:41 (02:20)
root :0 Mon Feb 13 18:20 - 18:46 (00:25)
reboot system boot 2.4.20-8 Mon Feb 13 18:18 (21:39)
reboot system boot 2.4.20-8 Mon Feb 13 18:14 (21:43)
marty pts/1 :0.0 Mon Feb 13 18:06 - down (00:06)
marty :0 Mon Feb 13 18:06 - down (00:06)
marty pts/0 nosoup4u Mon Feb 13 18:05 - down (00:07)
reboot system boot 2.4.20-8 Mon Feb 13 18:04 (00:08)

wtmp begins Mon Feb 13 18:04:26 2006
$

BTW nosoup4u is my Windows workstation - I'm ssh'd into the RH box.

Look in /tmp for anything unusual. Isolate it from your network.

$ ls -al /tmp
total 572
drwxrwxrwt 12 root root 4096 Feb 14 04:02 .
drwxr-xr-x 20 root root 4096 Feb 13 18:33 ..
drwxrwxrwt 2 root root 4096 Feb 13 18:46 .ICE-unix
-r--r--r-- 1 root root 11 Feb 13 18:46 .X0-lock
drwxrwxrwt 2 root root 4096 Feb 13 18:46 .X11-unix
srwx------ 1 root nobody 0 Feb 13 18:20 .fam_socket
drwxrwxrwt 2 xfs xfs 4096 Feb 13 18:19 .font-unix
srw-rw-rw- 1 root root 0 Feb 13 18:19 .gdm_socket
-rw-rw-rw- 1 root root 464160 Feb 10 10:04 irc.tar.gz
drwx------ 2 joel users 4096 Dec 5 16:27 orbit-joel
drwx------ 2 marty marty 12288 Feb 13 18:13 orbit-marty
drwx------ 2 root root 12288 Feb 13 18:46 orbit-root
drwxr-xr-x 2 marty marty 4096 Dec 3 15:06 samba
-rwxr--r-- 1 root root 44377 Feb 13 18:41
scrollkeeper-tempfile.0
drwx------ 2 marty marty 4096 Dec 11 18:49 ssh-XXRI9PKz
drwx------ 2 root root 4096 Jan 3 13:32 ssh-XXgHv7Ve
drwxrwxrwt 3 marty marty 4096 Jan 26 19:04 uscreens
[marty@BANYAN ~]$ ls -al /tmp/samba
total 8
drwxr-xr-x 2 marty marty 4096 Dec 3 15:06 .
drwxrwxrwt 12 root root 4096 Feb 14 04:02 ..
$

Good luck.

I removed everything on /tmp and rebooted, system still can't create
/var/log/messages. It also is now unable to start X-Windows on the
console.
What might I do next here?

Marty



-----Original Message-----
From: redhat-list-bounces@xxxxxxxxxx
[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Marty Landman
Sent: Monday, February 13, 2006 8:10 PM
To: redhat-list@xxxxxxxxxx
Subject: system logging is not


My RH9 gateway suddenly seems to have developed some problems today.
The

only thing special I recall doing was to change from a netgear hub to a

linksys switch and add an 8th box to my lan. There is also a netgear
switch to which this box is plugged in which used to uplink to the
netgear hub but now uplinks to the linksys switch. All 8 computers were

visible from my Win xp workstation after doing that btw.

Later I noticed that samba didn't seem to be working on my Win XP
workstation - although it can SSH to the RH box. And it's still
functioning as my LAN gateway. Saw a bunch of attempts on
/var/log/samba/.log (is that a kosher name btw?) evidence of attempted
break-ins from a day or two ago.

So not knowing what else to do I rebooted - windows user instinct :).
Noticed during the reboot that system logging and httpd startup both
FAILED. OTOH using Nautilus from the console I could find the other 7
computers on the network, but not this computer itself.

Here's some shell stuff that I think illustrates some of what's going
on:

[marty@BANYAN ~]$ pwd
/home/marty
[marty@BANYAN ~]$ ls -al /var/log
total 324
drwxr-xr-x 2 root root 4096 Feb 13 18:46 .
drwxr-xr-x 21 root root 4096 Jul 30 2005 ..
-rw-r--r-- 1 root root 28509 Feb 13 18:46 XFree86.0.log
-rw-r--r-- 1 root root 28584 Feb 13 18:20
XFree86.0.log.old
-rw------- 1 root root 0 Feb 13 18:04 boot.log
-rw------- 1 root root 0 Feb 13 18:04 cron
-rw-r--r-- 1 root root 6532 Feb 13 18:18 dmesg
-rw-r--r-- 1 root root 65631 Feb 13 18:18 ksyms.0
-rw-r--r-- 1 root root 65631 Feb 13 18:14 ksyms.1
-rw-r--r-- 1 root root 65631 Feb 13 18:04 ksyms.2
-rw------- 1 root root 0 Feb 13 18:04 maillog
-rw------- 1 root root 0 Feb 13 18:04 messages
-rw------- 1 root root 0 Feb 13 18:04 secure
-rw------- 1 root root 0 Feb 13 18:04 spooler
-rw------- 1 root root 315 Feb 13 18:12 sudolog
-rw-rw-r-- 1 root utmp 30336 Feb 13 20:41 wtmp
[marty@BANYAN ~]$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hdd1 5278644 2073532 2936972 42% /
/dev/hda1 99251 9324 84802 10% /boot
none 127664 0 127664 0% /dev/shm
/dev/hda2 4035432 33080 3797360 1% /mnt/kramer
/dev/hdb1 241263968 32998936 196009448 15% /mnt/maestro
[marty@BANYAN ~]$ top
top: error while loading shared libraries: libncurses.so.4: cannot open

shared object file: No such file or directory [marty@BANYAN ~]$


-----------------------------------------------

At this point I wonder if my computer's been hijacked or somehow
corrupted.
Either way not sure what do to next.

Thanks in advance,

Marty


Marty Landman, Face 2 Interface Inc. 845-679-9387 Webmaster's Bulletin
Board: http://bbs.face2interface.com/ Web Installed Formmail:
http://face2interface.com/formINSTal

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

Marty Landman, Face 2 Interface Inc. 845-679-9387 Webmaster's Bulletin
Board: http://bbs.face2interface.com/ Web Installed Formmail:
http://face2interface.com/formINSTal

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list


--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list



Relevant Pages

  • Re: Cable broadband, wired router and iLamp
    ... You do need to reboot the virgin box every time you switch ... between computers too which can sometimes be an annoyance which the ...
    (uk.comp.sys.mac)
  • Re: Cable broadband, wired router and iLamp
    ... You do need to reboot the virgin box every time you switch ... between computers too which can sometimes be an annoyance which the ...
    (uk.comp.sys.mac)
  • Re: Orbiter can save itself!
    ... The photos I've seen show the switch panels *removed* in order to ... install the RCO cable, so the switches would no longer be there for ... shuttle if necessary, or will every shuttle have its own RCO kit with ... I was asking about the original design of the shuttle computers, ...
    (sci.space.shuttle)
  • baffling speed problem
    ... There are a bunch of computers connected to the switch, ... Connections between computers in our building are fast. ... If a computer is plugged into a network jack, ...
    (comp.dcom.lans.ethernet)
  • Re: separating LANs?
    ... I do not know of a way to stop computers connected ... as the switch is unable to stop any traffic between ... inexpensive router and some creative firewalling rules in the 2 routers. ... >> the LAN ports of the first router, and designate it for use by only the ...
    (microsoft.public.windows.server.networking)