RE: Kudzu cannot detect 2nd network card

Please check the irq on both cards they should not be the same. Change
the irq both cards can not be using the same irq on the same machine...


-----Original Message-----
From: redhat-list-bounces@xxxxxxxxxx
[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Ong Ying Ying
Sent: Thursday, March 30, 2006 7:34 AM
To: General Red Hat Linux discussion list
Subject: Re: Kudzu cannot detect 2nd network card


Greg Golin wrote:
What card is this? Who is the vendor and what is the model? I suggest
you check whether the vendor provides newer drivers -- Seawolf is
quite old. You could also try and boot with a live cd, or to a rescue
mode of a later distribution install, and see if both cards get
initialized.

isapnp: Card 'Relia RE-2019 plug & Play Ethernet card'

NE*000 ethercard probe at 0x240: 00 c0 0c 50 ...
eth0: NE2000 ... using IRQ 10

Both card are the same type of card. Both are ok as they can
be used on one same isa port. The other isa port cannot
detect both of them so I guess it is spoilt. Do isa ports
need drivers or controllers?


There's no place to enable second NIC nor isa port in BIOS.
PCI, Serial, Parallel and IDE have in BIOS.


G

On 3/29/06, Oluwagbega Shobowale <gshobowale@xxxxxxxxxxxxxxxx> wrote:

I think you should check if the network card is functional if it is
check that the slot if working also. Then do your test again

-----Original Message-----
From: redhat-list-bounces@xxxxxxxxxx
[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Ong Ying Ying
Sent: Wednesday, March 29, 2006 4:16 PM
To: redhat-list@xxxxxxxxxx
Subject: Kudzu cannot detect 2nd network card


I am using Redhat 7.1 (Seawolf), Linux ver 2.4.2-2.

I have 2 network cards in my computer but kudzu detected 1 card only.
Why? ifconfig showed eth0 and lo only.

Then, I setup 2 interface in Network Configurator in X-Win and reboot.

Kudzu still didn't detect and 'modprobe: Can't locate module eth1' at
Bringing up eth1. eth1 cannot be activated on startup but it can be
activate in X but cannot save.

So how do I configure the other network card? Both the network cards
are the same. Network Configuration in Text Mode Setup can enter 1 IP
only. dmesg shows 1 network card only.

Thanks in advance.


--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list




--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

Relevant Pages

  • Re: irq?
    ... i have tried a number of linux distros, all of which set the irq for my RPTI ... EP401 ethernet card to 3, and all of which do very strange things when i try ... to use the network card for both my home network and the internet. ...
    (Fedora)
  • Re: Need big help from Event Viewer
    ... Event Source: Service Control Manager ... Not to mention that Windows has no idea beyond the network card about your ... Uninstall the card drivers, reboot and reinstall the card drivers. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Kudzu cannot detect 2nd network card
    ... the irq both cards can not be using the same irq on the same machine... ... I have tried one card on all the ports and all of them can detect the card. ... It seems that the computer can take 1 network card only. ...
    (RedHat)
  • Re: Need big help from Event Viewer
    ... The network card is functioning well. ... and then to the Windows XP loading screen. ... Uninstall the card drivers, reboot and reinstall the card drivers. ...
    (microsoft.public.windowsxp.help_and_support)
  • pcmcia network card configuration/installation
    ... I have a network card problem and I'm hoping that I can get some advice and information here. ... I've searched the web and read up the Slackware installation guide and I'm just about pulling my hair out trying to fix this thing. ... Oct 23 16:18:06 achilles kernel: Yenta: Using CSCINT to route CSC interrupts to PCI ...
    (comp.os.linux.hardware)