Re: USB Booting FC6
- From: "nilesh vaghela" <nileshj.vaghela@xxxxxxxxx>
- Date: Tue, 14 Nov 2006 10:22:51 -0500
The following may Help you.
I have not tried yet.
Keyword: USB EXTERNAL REDHAT LINUX RHEL BOOT INITRD INSTALL
1. Install RedHat RHEL 4 AS to the USB Hard Drive
Boot RHEL4 Installation CD, enter "expert". Partition your USB Hard
drive manually. In my case, I created 1GB /dev/sda1 mounted as /boot and
/dev/sda5 mounted as / (root), I also have /dev/sda7 SWAP partition.
After installation, boot from the RHEL4 Installation CD again, type
"linux rescue", don't let the installer mount the USB hard drive
partitions.
2. Mount partitions
mount /dev/sda5 /mnt/source
mount /dev/sda1 /mnt/source/boot
chroot /mnt/source
3. Restore initrd image
cp /boot/initrd-2.6.9-5.EL.img /tmp/initrd.gz
cd /tmp
gunzip initrd.gz
mkdir /tmp/a
cd /tmp/a
cpio -i < /tmp/initrd
(Output: 2078 blocks)
4. Edit init script to load USB drivers
vi /tmp/a/init
#!/bin/nash
mount -t proc /proc /proc
setquiet
echo Mounted /proc filesystem
echo Mounting sysfs
mount -t sysfs none /sys
echo Creating /dev
mount -o mode=0755 -t tmpfs none /dev
mknod /dev/console c 5 1
mknod /dev/null c 1 3
mknod /dev/zero c 1 5
mkdir /dev/pts
mkdir /dev/shm
echo Starting udev
/sbin/udevstart
echo -n "/sbin/hotplug" > /proc/sys/kernel/hotplug
echo "Loading scsi_mod.ko module"
insmod /lib/scsi_mod.ko
echo "Loading sd_mod.ko module"
insmod /lib/sd_mod.ko
echo "Loading libata.ko module"
insmod /lib/libata.ko
echo "Loading ata_piix.ko module"
insmod /lib/ata_piix.ko
echo "Loading jbd.ko module"
insmod /lib/jbd.ko
echo "Loading ext3.ko module"
insmod /lib/ext3.ko
*
############################## ########
echo "*** Loading usb-storage ***"
insmod /lib/usb-storage.ko
echo "*** Loading usb-uhci ***"
insmod /lib/ehci-hcd.ko
echo "*** Sleeping 5 seconds ***"
/bin/sleep 5
*
/sbin/udevstart
echo Creating root device
mkrootdev /dev/root
*
echo "*** Reread partition table ***"
/sbin/sfdisk -R /dev/sda
*
umount /sys
echo Mounting root filesystem
mount -o defaults --ro -t ext3 /dev/root /sysroot
mount -t tmpfs --bind /dev /sysroot/dev
echo Switching to new root
switchroot /sysroot
umount /initrd/dev
5. Copy USB drivers
cd /lib/modules/2.6.9-5.EL/kernel/drivers
cp usb/host/ehci-hcd.ko /tmp/a/lib
cp usb/storage/usb-storage.ko /tmp/a/lib
cp scsi/scsi_mod.ko /tmp/a/lib
cp scsi/sd_mod.ko /tmp/a/lib
6. Copy executables and dependent libraries
ldd /bin/sleep
ldd /sbin/sfdisk
cp /lib/tls/libm.so.6 /lib/tls/librt.so.1 /lib/tls/libc.so.6
/lib/tls/libpthread.so.0 /tmp/a/lib/tls
cp /lib/ld-linux.so.2 /tmp/a/lib/
cp /bin/sleep /sbin/sfdisk /tmp/a/bin/
7. Re-Make the init image
cd /tmp/a
find . | cpio -c -o | gzip -9 > /boot/usbinitrd.img
(output: 6077 blocks)
8. Edit grub.conf to boot from the new usbinitrd.img
vi /boot/grub/grub.conf
Reboot your system, Modify your BIOS to make USB Drive boot first, Enjoy!
Questions?
Email me: liulijian@xxxxxxxxx
Lijian Liu,
Sendmail, Inc.
On 11/14/06, Rupesh <rupeshn@xxxxxxxxx> wrote:
On 11/14/06, Cannon, Andrew <Andrew.Cannon@xxxxxxxxxxx> wrote:
>
> 1) You installed GRUB on the laptop's internal drive and GRUB hasn't got
the
> USB drivers to see the USB disk.
No it's installed on Maxtor, I thought I had this problem first time,
so i re-installed the OS to verify the above but it didn't work the
2nd time.
> 2) You are not booting from the USB disk (as set in the BIOS).
I use F12 option and manually choose to boot from the Maxtor (USB DISK).
> 3) You are trying to boot from the USB disk as set in the BIOS, but you
> haven't got a boot sector set up on the USB disk (possibly because of
1))
> and so the system thinks that there is no boot media on the external
drive.
>
> What options are you using for the BIOS and where is GRUB installed?
>
Answer as in Point 2.
--
Rupesh
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
--
Nilesh Vaghela
ElectroMech
Redhat Channel Partner and Training Partner
74, Nalanda Complex, Satellite Rd, Ahmedabad
25, The Emperor, Fatehgunj, Baroda.
www.electromech.info
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
- References:
- RE: USB Booting FC6
- From: Cannon, Andrew
- Re: USB Booting FC6
- From: Rupesh
- RE: USB Booting FC6
- Prev by Date: Re: USB Booting FC6
- Next by Date: RE: Red Hat qlogic drivers incompatible with QLogic sw?
- Previous by thread: Re: USB Booting FC6
- Next by thread: RHCE Job question
- Index(es):
Relevant Pages
|
|
