Re: P520



yes please, becuse i really need your feedback
I am in the process of implementing RHEL 4 or 5 on p52A (internal disk) Dual
channel SCSI RAID Enablement Daughter Card attached to SAN DS4700
connected through 4Gbps PCI Express HBA card with RDAC
using 2x SAN switches SAN16B-2.

Thanks


On 6/4/07, Rob Bruder <robert.bruder@xxxxxxxxxxxxxxx> wrote:

No, the machine was barely functional. I was booting it off SAN storage
and the lack of a good driver for the card made it almost impossible to
even navigate file systems. I haven't had a chance to try booting the
system off of internal storage and using the SAN for just data file
systems. Still in the process of testing RHEL on ppc for production
systems. I'll give it a shot if I have some free time this week and let
you know.

Mad Unix wrote:
> Did you enable the multipath for the HBA (failover/Loadbalancing) under
> Linux
>
> On 6/4/07, Rob Bruder <robert.bruder@xxxxxxxxxxxxxxx> wrote:
>>
>> I have had some issues with buggy QLogic HBA drivers, but other than
>> that, Red Hat 4 runs just fine on P5 series hardware.
>>
>> Mad Unix wrote:
>> > Am planning to install Linux on 4 Power PC (IBM-P5) attached to
FC-SAN
>> > storage.
>> > The servers will Apache HTTP/PHP, Java and Oracle
>> >
>> > Would this work on PowerPC,out of your experience need your input.
>> >
>> > I ma planning to install it on the following HW (4xP520systems)
>> > attached to
>> > SAN
>> > with the following HW spec
>> > -P520
>> > -Dual 2.1 GHz P5+
>> > -1.9 MB L2 / 36 MB L3
>> > -16GB ECC RAM
>> > -2x Internal Disk 73
>> > -RAID Dual channel ultra320 SCSI int. controller
>> > -Redhat 4 or Redhat 5 EL
>> > -SAN DS4700 Express Model 70 2GB cache
>> > -14x146.8GB 10k
>> > -Redhat EL 4 or 5
>> >
>> >
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>
>
>

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list




--
madunix
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list



Relevant Pages

  • Re: Dual Logic with Qlogic card
    ... FreeBSD sees the card and when the HBA is attached to a SAN we are ... able to see the disk space. ...
    (freebsd-questions)
  • Re: Dual Logic with Qlogic card
    ... FreeBSD sees the card and when the HBA is attached to a SAN we are ... able to see the disk space. ...
    (freebsd-hackers)
  • SUMMARY :- Cannot Configure port of Emulex HBA
    ... It seemed to be due to the firmware of the new HBAnot ... Hence, removed the new HBA ... Then installed it back on to the v1280 server and VIOLA ... ... the card won't work in slot a. ...
    (SunManagers)
  • Re: Hardware Specs For Cluster
    ... SAN unit. ... Windows Server MVP ... > OS and pagefile, HBA cards ... > 300Gb drives RAID 0+1 config.built in fibre channel switch. ...
    (microsoft.public.exchange.design)
  • Re: Ghost Drive Letters on 6 node Exchagne cluster
    ... > EMC Symmetric SAN. ... > this is the only HBA that would support VSS. ... we are now seeing the ghost drive letter issues where when we ...
    (microsoft.public.windows.server.clustering)

Loading