RE: Installing on scsi raid drives
- From: Alfred Hovdestad <alfred.hovdestad@xxxxxxxx>
- Date: Thu, 30 Aug 2007 21:50:50 -0600
Make sure that you have the latest update of FC6. I know with RHEL 4, we had to
have update 4 or 5 to see the RAID set.
Alfred Hovdestad, RHCE
University of Saskatchewan
Quoting dbrett@xxxxxxx:
Ok this is beyond my knowledge. I can look for the driver, but how do you
load the driver manually?
david
On Thu, 30 Aug 2007, Geoff Rainey wrote:
I have recently had the same problem with an Adaptec scsi raid
controller
(7901x) whereby the install would not detect the disks. Since this
Adaptec
Controller driver should have been available for this install, I had to
select "linux noprobe" to forcibly load the driver manually which
resolved
my issue - though caused another issue resulting in a kernel recompile
of a
kernel.org kernel.
These issues are generally resolved by the availability of a "driver
disk" for
A piece of hardware from the manufacturer's website, such as the HP site
under
support and drivers, if you're using HP gear.
Regards,
Geofrey.
-----Original Message-----
From: redhat-list-bounces@xxxxxxxxxx
[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of dbrett@xxxxxxx
Sent: Thursday, 30 August 2007 9:11 a.m.
To: General Red Hat Linux discussion list
Subject: Re: Installing on scsi raid drives
Unfortunately, It does not see the drive. It is a working drive because
it has an older version of another Linux running on it.
On Wed, 29 Aug 2007, Ali, Saqib wrote:
if it is a hardware RAID then you don't have to do anything. FC6
should just see it as a single storage unit (Harddrive)
I have few DL380 with hardware raid running FC6/RH4, and I didn't have
to do anything special.
saqib
http://security-basics.blogspot.com/
On 8/29/07, dbrett@xxxxxxx <dbrett@xxxxxxx> wrote:
I am new to install FC6 on SCSI hardware RAID drives.
I am trying to install FC6 on Compact DL380 with three discs in a
RAID 5 configuration. When I try FC6 does not see the drive. What
do I have to do for FC6 to see the hardware RAID disc?
My search has come across anything useful.
thanks
david
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
--
Saqib Ali, CISSP, ISSAP
http://www.full-disk-encryption.net
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
==========================================================
For more information on the Television New Zealand Group, visit us
online at tvnz.co.nz
==========================================================
CAUTION: This e-mail and any attachment(s) contain information that
is intended to be read only by the named recipient(s). This information
is not to be used or stored by any other person and/or organisation.
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
- References:
- Installing on scsi raid drives
- From: dbrett
- Re: Installing on scsi raid drives
- From: Ali, Saqib
- Re: Installing on scsi raid drives
- From: dbrett
- RE: Installing on scsi raid drives
- From: Geoff Rainey
- RE: Installing on scsi raid drives
- From: dbrett
- Installing on scsi raid drives
- Prev by Date: RE: lvm logical volume paths
- Next by Date: mother board information
- Previous by thread: RE: Installing on scsi raid drives
- Next by thread: login welcome message
- Index(es):
Relevant Pages
- Getting software RAID to work, help!
... Raid on board controller. ... I cannot get the Linux native raid in the kernel
to ... There is a driver by Promise, ... can't really be loaded as a module after
bootup since the RAID drives ... (comp.os.linux.setup) - Re: Almost there, but confused about SATA selection in BIOS
... It recognized all the 2GB of memory and the drives. ... RAID mode ...
For Standard IDE, the "Enhanced Mode" is the one you should use, as ... for use with the
default driver in WinXP SP1/SP2. ... (alt.comp.periphs.mainboard.asus) - Re: Almost there, but confused about SATA selection in BIOS
... It recognized all the 2GB of memory and the drives. ... RAID mode ...
For Standard IDE, the "Enhanced Mode" is the one you should use, as ... for use with the
default driver in WinXP SP1/SP2. ... (alt.comp.periphs.mainboard.asus) - Re: Almost there, but confused about SATA selection in BIOS
... It recognized all the 2GB of memory and the drives. ... RAID mode ...
for use with the default driver in WinXP SP1/SP2. ... As far as I know, the AHCI
and RAID, need the RAID driver (installed via ... (alt.comp.periphs.mainboard.asus) - Re: RAID Controller & Info
... the Intel driver for SATA HD is the root cause. ... | controller like
the ICH5R on 875P chipset mobos and NOT in RAID ... |> "Returns information about the
geometry of floppy drives. ... (microsoft.public.windows.server.sbs)