RE: RHEL4 and HP Proliant server
- From: <m.roth2006@xxxxxxx>
- Date: Tue, 23 Oct 2007 17:18:24 -0400 (EDT)
Maarten,
Thanks, and I forwarded your response to him.
mark
---- Original message ----
Date: Tue, 23 Oct 2007 15:05:47 -0400
From: "Broekman, Maarten" <Maarten.Broekman@xxxxxxx>
Subject: RE: RHEL4 and HP Proliant server
To: "General Red Hat Linux discussion list" <redhat-list@xxxxxxxxxx>
What generation of DL380? Which RHEL4 update? We have DL380s here (G2,
G3, G4) and we can build off the boot CD without any problems.
Also, you need to make sure that you've created a logical drive on the
hardware raid. If there are no logical drives on the hardware raid then
there are 'technically' no hard drives. If you want to use LVM, then
you would have to create each hard drive as it's own logical drive,
though I'm not sure why you want to do that.
As Jeremy mentioned, it's definitely a cpqarray or cciss driver that
you're going to end up using, but that should be on the CDs already.
Maarten Broekman
Email: maarten.broekman@xxxxxxx
-----Original Message-----
From: redhat-list-bounces@xxxxxxxxxx
[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Gaddis, Jeremy L.
Sent: Tuesday, October 23, 2007 2:57 PM
To: General Red Hat Linux discussion list
Subject: Re: RHEL4 and HP Proliant server
On 10/23/07, m.roth2006@xxxxxxx <m.roth2006@xxxxxxx> wrote:
Ok, I've got a guy here - he's really a network guy, and he's tryingto put RHEL4 on a Proliant server, a DL380, I believe. It's *all*
hardware RAID, and the std. RHEL4 CDs can't id the h/d. He's tried d/l a
package from HP, but that unzips to a file.dd, which I'm thinking needs
to be dd'd to something....
Anyone have any ideas where he needs to go?
You'll most likely need either the cpqarray or cciss drivers. I have
a pair of DL580's that are similar in hardware and that's the modules
needed for RHEL4 to see the (hardware RAID) volumes.
The file.dd is probably a floppy disk image, which can be written to a
floppy with "dd if=file.dd of=/dev/fd0". The drivers on that floppy
can then be loaded during the installation process.
--
Jeremy L. Gaddis
http://www.jeremygaddis.com/
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
- Prev by Date: RE: RHEL4 and HP Proliant server
- Next by Date: apache's rotatelogs
- Previous by thread: RE: RHEL4 and HP Proliant server
- Next by thread: Fwd: RE: RE: RHEL4 and HP Proliant server
- Index(es):
Relevant Pages
- RE: RE: RE: RHEL4 and HP Proliant server
... hardware raid stuff through default build process, ... not sure about other
RAID controllers, but it seems like HP decided not ... To set up the logical drives,
you should be able to power on the system ... Which RHEL4 update? ... (RedHat) - RE: RHEL4 and HP Proliant server
... If there are no logical drives on the hardware raid then ... RHEL4
CDs can't id the h/d. ... package from HP, but that unzips to a file.dd, which I'm thinking
needs ... (RedHat) - RE: RHEL4 and HP Proliant server
... RHEL4 CDs can't id the h/d. ... You'll most likely need either the cpqarray
or cciss drivers. ... needed for RHEL4 to see the (hardware RAID) volumes. ...
This email has been scanned by the MessageLabs Email Security System. ... (RedHat)