Re: Creating raid 1+0 using LVM2
I see that I have to use mdadm and lvm2. Mdadm seems easy enough to create
raid 10(1+0).
On Dec 13, 2007 5:03 PM, Ezra Taylor <ezra.taylor@xxxxxxxxx> wrote:
Hello All:
Is it possible to create a raid 1+0 using LVM2? If
so, do any of you have the steps to do this?
Thanks
--
Ezra Taylor
--
Ezra Taylor
--
redhat-list mailing list
unsubscribe
mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
Relevant Pages
- Re: [opensuse] 10.2 no RAID to 11.0 RAID 1
... 10.2 no RAID to 11.0 RAID 1 ... you can force rebuilds in mdadm in situations where no firmware raid will ever let you. ... Send me your problem disks that you think are impossible to assemble and I bet in a little while I can tell you how to assemble the array as long as there actually is enough there to use. ... One thing I've seen, which I don't think is your problem but shows the kind of thing that happens, a disk will drop out of the array and reappear instantly as a higher drive letter than the system really has. ...
(SuSE) - HELP Recover software RAID5...
... I am hoping some brilliant sysadm can help me recover my software raid 5. ... Over Time as the media drive was filled up, I add additional drives to the ... mdadm: /dev/sdh1 requires wrong number of drives. ... mdadm: /dev/sdh has wrong uuid. ...
(comp.os.linux.misc) - Re: Mdadm -- Restoring an array
... past, when I've tried to restore a RAID, I've had trouble with it. ... The man page for mdadm makes it look like a RAID can be reassembled ... to tell mdadm to scan local drives and re-assemble an existing RAID. ... Of course, if a drive is replaced, you'll need to create a new conf file. ...
(Debian-User) - Re: Help: F11 anaconda doesnt see my hard drives
... When you say softraid, you mean linux software raid, rather than bios raid or hardware raid? ... Something in Anaconda is failing to see the second and the third drive on a machine with the first drive being an IDE drive, and the 2nd and the 3rd drive being SCSI drives. ... It doesn't see the drives, but I can flip over to the ALT-F2 shell, and run mdadm --assemble --scan. ... This sounds as if either the raid or scsi modules are not being loaded. ...
(Fedora) - Re: RAID 0+1 (Problem)
... I followed the steps in the link below but my RAID 10 array had a problem ... But after a reboot, I got errors re this new RAID device ... mdadm: ... And definitely talk to your boss about WHY he wants mirrored stripes. ...
(Fedora) |
|
