Port Forwarding

I am trying to do port forwarding and I just can't seem to get it to work.
I hope that someone can help.

Machine 1 is running RHEL AS 4.4 with the 2.6.9-42.0.2.ELsmp kernel.
iptables has been running as my firewall since I set it up.

I am trying to get anything that comes in to port 3389 on "Machine 1" to go
to "Machine2" at a different location. Lets say for this that the IP of
"Machine1" is 70.70.70.70 and the remote machine ("Machine 2") that I want
to forward to is 209.209.209.209. I am assuming that I don't have to do
anything on "Machine2" except make sure the firewall for that port is opened
to "Machine 1".

I have done the following on "Machine 1":
echo 1 > /proc/sys/net/ipv4/ip_forward

Here is my /etc/sysconfig/iptables file from "Machine 1". This is not the
one that I would normally use because it is to open, but am for testing.
####################
# Generated by iptables-save v1.2.11 on Wed Dec 19 10:50:11 2007
*nat
:PREROUTING ACCEPT [3:536]
:POSTROUTING ACCEPT [9:635]
:OUTPUT ACCEPT [8:583]
-A PREROUTING -p tcp -m tcp --dport 3389 -j DNAT --to-destination
209.209.209.209:80
COMMIT
# Completed on Wed Dec 19 10:50:11 2007
# Generated by iptables-save v1.2.11 on Wed Dec 19 10:50:11 2007
*mangle
:PREROUTING ACCEPT [318:24902]
:INPUT ACCEPT [312:24214]
:FORWARD ACCEPT [3:152]
:OUTPUT ACCEPT [276:32613]
:POSTROUTING ACCEPT [279:32765]
COMMIT
# Completed on Wed Dec 19 10:50:11 2007
# Generated by iptables-save v1.2.11 on Wed Dec 19 10:50:11 2007
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [276:32613]
:RH-Firewall-1-INPUT - [0:0]
-A INPUT -j RH-Firewall-1-INPUT
-A FORWARD -i eth0 -p tcp -m tcp --dport 3389 -j ACCEPT
-A FORWARD -j RH-Firewall-1-INPUT
-A OUTPUT -o eth0 -j LOG --log-prefix "BANDWIDTH_OUT:" --log-level 7
-A RH-Firewall-1-INPUT -i eth0 -j ACCEPT
-A RH-Firewall-1-INPUT -i lo -j ACCEPT
-A RH-Firewall-1-INPUT -p icmp -m icmp --icmp-type any -j ACCEPT
-A RH-Firewall-1-INPUT -d 224.0.0.251 -p udp -m udp --dport 5353 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
COMMIT
# Completed on Wed Dec 19 10:50:11 2007
####################

Thanks
Steve

--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

Relevant Pages

  • RE: Possible DoS Attack?
    ... > was compromised they'd have simply turned off the filter, ... system accepts to turn the firewall off? ... wrote regarding RE: Possible DoS Attack?: ... What your firewall dropped was the result of a port ...
    (Incidents)
  • Re: keeping ports open
    ... If a port is open, it means that 1) a software or service is running on your ... and 2) you're not using a firewall or your firewall isn't ... Use firewall software and hardware and antivirus software that is ... Follow the instructions for hardening Windows and IIS at ...
    (microsoft.public.security)
  • Re: How to Maintain an IIS Server?
    ... > server running on a Windows 2000 server. ... before a firewall and antivirus have been installed]. ... open ports; however, this will not identify which program is using the port. ...
    (microsoft.public.inetserver.iis.security)
  • Re: CEICW fails at firewall config
    ... ISA Server prevents connection to a remote desktop when you connect through ... Remote Web Workplace on a Windows Small Business Server 2003-based computer ... Acceleration Server as a firewall. ... connection uses TCP port 4125. ...
    (microsoft.public.windows.server.sbs)
  • Re: How to Maintain an IIS Server?
    ... >> server running on a Windows 2000 server. ... > before a firewall and antivirus have been installed]. ... > program or executable using that port. ...
    (microsoft.public.inetserver.iis.security)