Re: [SLE] netgear ma101 usb adapter

From: LinuxWorld999 (linuxworld999_at_yahoo.co.uk)
Date: 08/31/03

  • Next message: Patrick Hooker: "Re: [SLE] For or against ..Hyperthreading."
    To: suse-linux-e@suse.com
    Date: Sun, 31 Aug 2003 20:52:12 +0100
    
    

    On Tuesday 15 July 2003 16:28, jack malone wrote:
    > I'm trying to get this wireless usb adapter installed an working in suse
    > 8.2. I plugged it into usb port on back of computer it the computer seemed
    > to lock up. so i rebooted with it plugged into usb port an it locked up
    > during booting process. had to reboot with it not plugged in to get going
    > agin. I have an tyan mother board with dual cpu ( S2466N-4M ). Can anyone
    > give me info on getting this working or had this problem know the solution.
    > thanks
    >
    > jack

    The following procedure helped me.

    At first, after plugging in the adapter in the usb port it was not recognised.
    After some research, it appears that the problem is the usb-uhci driver
    loaded when booting. The uhci driver should be used instead.

    The command "modprobe -r usb-uhci" removes the driver and "modprobe uhci"
    loads uhci driver. On plugging in the adapter, the system console has a
    message "No config. file found...". "iwconfig" confirms the driver is
    recognised and can be configured.

    Alternatively, under yast2->system->editor for
    /etc/sysconfig->hardware->hotplug->Hotplug_usb_hostcontroller_list, remove
    the "usb-uhci" driver from the list. The default is "ehci-hcd ohci-hcd
    uhci-hcd usb-uhci uhci usb-ohci ehci-hcd". It is changed to "ehci-hcd
    ohci-hcd uhci-hcd uhci usb-ohci ehci-hcd".

    The same procedure worked with my laptop. The first time the adapter was
    plugged in, there was a kernel panic. After a reboot, the adapter was
    recognised and connected with the wireless access pint.

    I hope this is useful for others trying to configure such an adapter in SuSE
    8.2.

    -- 
    Check the headers for your unsubscription address
    For additional commands send e-mail to suse-linux-e-help@suse.com
    Also check the archives at http://lists.suse.com
    Please read the FAQs: suse-linux-e-faq@suse.com
    

  • Next message: Patrick Hooker: "Re: [SLE] For or against ..Hyperthreading."

    Relevant Pages

    • Wireless USB Disconnects Work Around?
      ... my 802.11b wireless USB adapter disconnects randomly and without ... multiple wireless channels, played with all available "preamble type" ... share IRQ's with the USB host controller. ... I used a command built into Windows XP ...
      (microsoft.public.windowsxp.network_web)
    • Re: USB to Serial Bridge
      ... Ein nicht korrekt installiertes USB Gerät wird auch nicht mit Strom ... ATEN liefert nur einen Kabel USB zu Seriell Adapter. ... auf die *.inf Datei und installieren wählen. ... Der Treiber legt einen virtuellen COM Port an mit einer Nummer größer ...
      (microsoft.public.de.german.windowsxp.hardware)
    • Re: USB connected HDs
      ... connected the included external power adapter to the HD and the USB ... HDs I own and with USB flash drives. ... the auxiliary power supply connector. ...
      (microsoft.public.windowsxp.general)
    • Re: USB connected HDs
      ... the included external power adapter to the HD and the USB ... I own and with USB flash drives. ... the auxiliary power supply connector. ...
      (microsoft.public.windowsxp.general)
    • Re: PCMCIA to USB adapter? Hack?
      ... Find a 5Volt PCMCIA to/from USB v? ... Plug adapter ... The configuration of the RPLed files and drivers, ...
      (comp.sys.ibm.ps2.hardware)